Loading...
Silver_Signed Permit App scan with NES signatures and submittalsVreeland Design Associates An integrative approach to design engineering and site planning 116 River Road, Leyden, MA 01337 Phone: (413) 624-0126 Email: dvreeland@verizon.net Fax: (413) 624-3282 Date: February 20, 2024 To: Justin Annis NorthEast Solar 136 Elm Street Hatfield, MA 01038 From: David Vreeland, P.E. Vreeland Design Associates Re: Josh Silver, 117 Maplewood Terrace, Northampton, MA: Structural assessment of existing house and addition roofs to support the proposed PV solar panel arrays. I have investigated the existing roof framing in the areas of the proposed PV solar panel installations. Based on the Assessor’s records, the main 2-story, 20’x 25’ house was constructed in 1864. A 14’x 25’ addition built off the back east facing gable end appears to have been constructed at a later date. Around 2012, a 2nd floor addition was constructed over the earlier 14’x 25’ addition. 7 PV solar panels are to be installed on the main house south facing roof and 7 solar panels on the south facing roof of the addition. The main house roof is framed with 2”x 5” rafters installed 24” on-center, spanning 9’-8” with a 12/12 pitch. The rafters are secured to the attic 2x6 floor framing preventing the roof from spreading. Full length 2x10s have been sistered to every other rafter. The roof appears relatively straight and true. Based on the grain pattern and limited number of knots the original rafters appear to be Douglas-fir, No.1 & better. Plywood sheathing has been installed over the original 1” roof boards. The newer 2nd floor addition roof is framed with 2x4 scissor designed roof trusses, installed 24” on-center, spanning 14’ with a 12/12 pitch. The roofing is composite asphalt shingles. I have reviewed the mounting details for the proposed PV solar panel arrays. Based on my calculations and a PV solar panel unit weight of 46± lbs, with the attachment points of the main house solar panel array placed at a maximum of 4’ on center and secured to the 2x10 reinforced rafters as often as possible and placed a maximum of 4’ on-center and staggered to minimize the load to any one roof truss on the addition, the roof framing of the main house and addition are adequate to support the proposed PV solar panel arrays and the snow and wind load requirements of the current 9th Edition of the MA State Building Code for the City of Northampton. Please contact me if you have any questions or need additional information. Sincerely, David Vreeland, PE Vreeland Design Associates