Pages from e175b3 Page 6
ASSEMBLY:
PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
1 Ground Screw (#12) 2 Outlet Box Screws (#13) 2 Mounting Screws (#10)
1 Cross Bar (#11) 3 Wire Connectors (#8)
INSTALLATION INSTRUCTIONS:
1. Screw the two Mounting Screws (#10) into the cross bar (#11). Mount the cross bar (#11) to the
Outlet Box (#9) using the two provided Outlet Box Screws (#13). [Make sure the threads of the
Mounting Screws (#10) are facing outside when the cross bar (#11) is attached to the Outlet Box
(#9).] The side of the Cross Bar (#11) marked “GND” must face out.
2. Connect the white wire from the fixture to the white wire from the Outlet Box (#9), and the black
wire from the fixture to the black wire from the Outlet Box (#9). Cover the two wire connections
using the provided Wire Connectors (#8). Wrap the two wire connections with electrical tape for
a more secure connection. If your outlet box has a ground wire (green or bare copper), connect
fixture’s ground wire to it using the wire connector (#8). Otherwise connect the copper ground
from the fixture to Ground screw (#12) on the Cross bar (#11). Note: If you have electrical
questions, consul t your local electrical code for approved grounding methods. 3. Cap Nut
4. Back Plate
1. Screw
5.Light Bulb
7. Fixture Frame
6.Glass Panel
2. Cover