The URL can be used to link to this page

Nancy Sternbach Building Permit AppThe Commonwealth of Massachusetts Board of Building Regulations and Standards Massachusetts State Building Code, 780 CMR Building Permit Application To Construct, Repair, Renovate Or Demolish a One- or Two-Family Dwelling FOR MUNICIPALITY USE Revised Mar 2011 This Section For Official Use Only Building Permit Number: _____________________ Date Applied: ______________________________ ___________________________________ ____________________________________________ ___________ Building Official (Print Name) Signature Date SECTION 1: SITE INFORMATION 1.1 Property Address: ____________________________________________ 1.1a Is this an accepted street? yes_____ no_____ 1.2 Assessors Map & Parcel Numbers _____________________ ____________________ Map Number Parcel Number 1.3 Zoning Information: _______________ ___________________ Zoning District Proposed Use 1.4 Property Dimensions: _____________________ ____________________ Lot Area (sq ft) Frontage (ft) 1.5 Building Setbacks (ft) Front Yard Side Yards Rear Yard Required Provided Required Provided Required Provided 1.6 Water Supply: (M.G.L c. 40, § 54) Public  Private  1.7 Flood Zone Information: Zone: ___ Outside Flood Zone? Check if yes 1.8 Sewage Disposal System: Municipal  On site disposal system  SECTION 2: PROPERTY OWNERSHIP1 2.1 Owner1 of Record: ________________________________________ _________________________________________________ Name (Print) City, State, ZIP _____________________________________________ _________________ ___________________________________ No. and Street Telephone Email Address SECTION 3: DESCRIPTION OF PROPOSED WORK2 (check all that apply) New Construction  Existing Building  Owner-Occupied  Repairs(s)  Alteration(s)  Addition  Demolition  Accessory Bldg.  Number of Units_____ Other  Specify:________________________ Brief Description of Proposed Work2:_________________________________________________________________ _______________________________________________________________________________________________ _______________________________________________________________________________________________ SECTION 4: ESTIMATED CONSTRUCTION COSTS Item Estimated Costs: (Labor and Materials) Official Use Only 1. Building $ 1. Building Permit Fee: $_______ Indicate how fee is determined: Standard City/Town Application Fee Total Project Cost3 (Item 6) x multiplier _______ x _______ 2. Other Fees: $_________ List:_________________________________________________ ____________________________________________________ Total All Fees: $_______________ Check No. ______Check Amount: _______Cash Amount:______ Paid in Full Outstanding Balance Due:__________ 2. Electrical $ 3. Plumbing $ 4. Mechanical (HVAC)$ 5. Mechanical (FireSuppression)$ 6.Total Project Cost:$ x Solar PV 76 Franklin St Nancy Sternbach 76 Franklin St Northampton, MA 01060 (413) 626-8803 Installation of a flush-mounted rooftop solar PV system on the residence. 25 (400W) solar panels 34,500 8,500 43,000 SECTION 5: CONSTRUCTION SERVICES 5.1 Construction Supervisor License (CSL) ________________________________________________________ Name of CSL Holder _________________________________________________________ No. and Street _________________________________________________________ City/Town, State, ZIP _________________________________________________________ __________________ ______________________________________ Telephone Email address _____________________ ______________ License Number Expiration Date List CSL Type (see below) _______________ Type Description U Unrestricted (Buildings up to 35,000 cu. ft.) R Restricted 1&2 Family Dwelling M Masonry RC Roofing Covering WS Window and Siding SF Solid Fuel Burning Appliances I Insulation D Demolition 5.2 Registered Home Improvement Contractor (HIC) ______________________________________________________________ HIC Company Name or HIC Registrant Name ______________________________________________________________ No. and Street ________________________________________ ____________________ City/Town, State, ZIP Telephone _____________________ ______________ HIC Registration Number Expiration Date _______________________________________ Email address SECTION 6: WORKERS’ COMPENSATION INSURANCE AFFIDAVIT (M.G.L. c. 152. § 25C(6)) Workers Compensation Insurance affidavit must be completed and submitted with this application. Failure to provide this affidavit will result in the denial of the Issuance of the building permit. Signed Affidavit Attached? Yes ……….  No ………..  SECTION 7a: OWNER AUTHORIZATION TO BE COMPLETED WHEN OWNER’S AGENT OR CONTRACTOR APPLIES FOR BUILDING PERMIT I, as Owner of the subject property, hereby authorize_____________________________________________________ to act on my behalf, in all matters relative to work authorized by this building permit application. ______________________________________________________ ______________________ Print Owner’s Name (Electronic Signature) Date SECTION 7b: OWNER1 OR AUTHORIZED AGENT DECLARATION By entering my name below, I hereby attest under the pains and penalties of perjury that all of the information contained in this application is true and accurate to the best of my knowledge and understanding. _____________________________________________________________ ______________________ Print Owner’s or Authorized Agent’s Name (Electronic Signature) Date NOTES: 1.An Owner who obtains a building permit to do his/her own work, or an owner who hires an unregistered contractor(not registered in the Home Improvement Contractor (HIC) Program), will not have access to the arbitration program or guaranty fund under M.G.L. c. 142A. Other important information on the HIC Program can be found atwww.mass.gov/oca Information on the Construction Supervisor License can be found at www.mass.gov/dps 2.When substantial work is planned, provide the information below: Total floor area (sq. ft.) _________________________ (including garage, finished basement/attics, decks or porch)Gross living area (sq. ft.) __________________ Habitable room count ______________________ Number of fireplaces______________________ Number of bedrooms _____________________ Number of bathrooms ____________________ Number of half/baths ______________________ Type of heating system ___________________ Number of decks/ porches __________________ Type of cooling system_____________________ Enclosed ______________Open _____________ 3.“Total Project Square Footage” may be substituted for “Total Project Cost” scott.fournier@allenergysolar.com413-658-8604 CS-109847 12/4/2023 U All Energy Solar Chicopee MA 01013 159 Front Street Scott Fournier 413-427-2050 175144 4/24/2023 colin.buechel@allenergysolar.com All Energy Solar see attached contract 67 Pearl Street South Hadley, MA 01075 66D Mainline Dr Westfield, MA 01085 11/8/2022 Clean Energy Project Agreement 159 Front Street Chicopee, MA 01013 800.620.3370 AllEnergySolar.com Customer Information Customer Name Order Number Nancy Sternbach Customer Address 76 Franklin St City State Zip Code Northampton MA 01060 Installation Address (if different from Customer Address) City State Zip Code Home Phone Number Work Phone Number Mobile Phone Number (413) 626-8803 Email Address Nancysaporatas@gmail.com 1 This Clean Energy Project Services Agreement (“Contract”) is effective as the latest date referenced on the signature line below (“Effective Date”) by and between All Energy Solar Inc. (“Contractor”) (Massachusetts Home Improvement Contractor Registration Number: 175144, Expiration Date: 4/24/23) with its principal place of business located at 1264 Energy Lane, St. Paul, MN 55108 and ___________________________________________________ (“Customer”). Contractor and Customer are occasionally referred to herein individually as a “Party” and collectively as the “Parties.” 1.Estimated Description of the Project, the Signiﬁcant Materials to be Used and the Equipment to be Installed. Contractor will furnish all work, labor, tools, equipment, materials, supervision, scheduling, coordination, and contract administration necessary to complete in a good and workmanlike manner the following: a clean energy project (“Clean Energy Project”) as more particularly described in Attachment A to this Contract (the “Scope of Work”). Contractor’s scope of work does not include any of the items on the “List of Work Exclusions” in Attachment B unless any such item(s) is explicitly listed in the Scope of Work. This Contract shall be controlling over the Scope of Work except that the Scope of Work shall control over the “List of Work Exclusions.” 2.Work Site. The following is the address of the location where the work by Contractor is to be performed: _______________________________________________________________________________________________. Such location, together with all structures located there, is referred to as the “Property”). 3.Contract Price. Customer will pay Contractor the sum of $__________________ for the work to be performed under this Contract, subject to additions and deductions pursuant to any Change Order agreed upon in writing by the Parties. 4.Down Payment. $____________________ is due at signing of this Contract. 5.Late Payment Interest. Interest shall accrue on any past due balance owed at the rate of 1.5% per month (or the highest rate not prohibited by law, whichever is lower) beginning on the 16th day after receipt of the invoice by Customer. This remedy shall be in addition to, and not exclusive of, any other remedy available under this Contract or applicable law. 6.Schedule of Progress Payments. Customer shall pay Contractor according to the schedule set for in Attachment C to this Contract. Nancy Sternbach 76 Franklin St, Northampton, MA 01060 $43,000 $0 DocuSign Envelope ID: 992517D2-0D3F-4826-8FDA-860F26CB173D _______________________________Nancysaportas@gmail.con Clean Energy Project Agreement 159 Front Street Chicopee, MA 01013 800.620.3370 AllEnergySolar.com 7.Security Interest in Equipment. Customer agrees the Contractor has a security interest in all equipment and other materials included in the Clean Energy Project to secure amounts due and payable under this Contract and that Contractor has the right to ﬁle a UCC-1 covering the Clean Energy Project to give public notice of its security interest. Such security interest shall automatically terminate upon Customer’s payment in full of all amounts due under this Contract. 8.Construction Lien. The law of your state gives Contractor the right to ﬁle liens (typically referred to as construction liens or mechanics liens) against the Property in the event that Customer does not pay for the Clean Energy Project as agreed under this Contract. 9.Payment: Payment to Contractor may be made by cash, check or wire transfer. Payment by credit card, if accepted by Contractor, may result in Customer being charged any associated processing fees. If, subsequent to the execution of this Contract, a change occurs to any law, ordinance, rule, or regulation which materially affects Contractor's work, then Contractor shall notify Customer in writing of such change and Contractor will be entitled to an equitable adjustment in the Contract Price and the date of Substantial Completion. 10.Financial Assurances: Prior to commencement of work, and at each stage anticipated thereafter, Contractor shall have the right to request reasonable assurances that Customer can fulﬁll its ﬁnancial obligations hereunder. If the evidence of ﬁnancial arrangements is not satisfactory to Contractor, then Contractor may stop work hereunder until such ﬁnancial assurance is provided or may terminate this Contract with written notice to Customer and Contractor will be entitled to any unrecoverable costs in the event of this termination. 11.Project Start and Completion Date Estimates. Contractor shall commence the work to be performed under this Contract within 90 days after execution of this Contract. For purposes of this Section “commencing work” shall refer to beginning the engineering and other work to enable the Project to proceed. Customer understands that on-site work cannot begin until after utility approval of the interconnection application for the Clean Energy Project. Customer further understands that substantial completion of the Clean Energy Project, so it can be used for its intended purpose, depends upon a number of circumstances beyond Contractor’s control. While Contractor intends to pursue the work in a commercially reasonable manner, Customer understands and acknowledges that, unless expressly stated otherwise in this Contract, any commencement dates and completion dates provided by Contractor are only estimates and subject to change based upon actual circumstances, including without limitation, Permissible Delays described in Section 12, availability of materials and labor, approval and inspection by third parties, Contractor’s workload and other circumstances that may affect Contractor’s scheduling and ability to commence and complete the work described in this Contract. See Attachment A for Important Dates. 12.Permissible Delays. Notwithstanding the foregoing, Contractor shall be excused from any delay in the commencement and completion of the Work to be performed under this Contract due to acts or omissions of Customer or of Customer’s agents, employees or independent contractors, actions or omissions of governmental agencies (including the denial or cancellation of any necessary license or permit for the project), changes required to the project due to unanticipated circumstances, latent physical conditions at the Property, Customer’s requests, Customer’s failure to make progress payments promptly, and all causes beyond Contractor’s reasonable control, including, but not limited to, acts of God, ﬁres, weather-related delays, government restrictions, material shortages, embargoes, labor disputes, pandemics and their consequences, or acts of war (collectively, “Permissible Delays”). 13.Termination by Contractor due to Impossibility of Performance. In the event the events giving rise to Permissible Delays continue for more than ninety days and Contractor reasonably concludes that such Permissible Delays are likely to continue and prevent Contractor from completing the Clean Energy Project, Contractor shall be entitled to terminate this Contract upon 10 days written notice to Customer. In the event of such termination, if the cost of the work performed by Contractor exceeds the amount of payments received from the Customer, then Customer shall reimburse Contractor for the unpaid work. If the cost of the work performed by Contractor at the time of termination is less than the amounts paid by Customer, then Contractor will refund the excess payments to Customer. 14.Substitution of Equipment. The availability of the speciﬁc equipment described in the Scope of Work may depend on circumstances beyond Contractor’s reasonable control. Contractor shall have the right to substitute different equipment components for those identiﬁed in the Scope of Work so long as such substitute equipment is of comparable quality and performance to the originally speciﬁed equipment. If such Substitution will increase the cost of the Clean Energy Project, Contractor shall notify Customer and obtain a Change Order in connection with such substitution. 2 DocuSign Envelope ID: 992517D2-0D3F-4826-8FDA-860F26CB173D Clean Energy Project Agreement 159 Front Street Chicopee, MA 01013 800.620.3370 AllEnergySolar.com 15.Customer’s Responsibilities and Representations. 15.1.Installation. Customer is responsible for making the Property ready and in the condition Contractor used to create the Scope of Work. During Installation, Customer shall not move, remove, modify, alter, or change in any way the equipment or any part thereof without the prior written approval of Contractor. 15.2.Unanticipated Work. Customer is solely responsible for the coordination and expense of any unanticipated work during installation due to subsurface or unknown physical conditions that differ from those described in the Scope of Work or this Contract. If any unanticipated work is required (including, but not limited to, moving equipment once it has been installed, moving or removing existing antennas, vents, conduit, or wires and coordinating and/or waiting for other job-site contractors) Customer agrees to pay Contractor for the cost of any work outside the Scope of Work that Contractor performs and Contractor will prepare a change order for the cost of the unanticipated work. 15.3.Tree Removal; Snow Removal; Cleaning of Panels. If necessary or if desired to improve the performance of the Clean Energy Project, tree removal, tree trimming, snow removal and cleaning of solar panels are the sole responsibility of the Customer. 15.4.Pre-Existing Conditions. Customer acknowledges that proper operation of the equipment purchased hereunder may be dependent upon Customer’s existing equipment and Contractor shall have no liability for equipment not purchased hereunder. While Contractor will exercise all due care, Contractor will not be responsible for pre-existing conditions of any roof or for damages or problems arising from such pre-existing conditions which may be aggravated by normal material handling procedures on the roof. 15.5.Access to Work. Customer shall grant free access to work areas for workmen and vehicles, for utility and governmental employees who may be required to inspect the Clean Energy Project or Property and shall allow areas for storage of materials and rubbish. Customer agrees to keep driveways clear and available for movement and parking of trucks during normal work hours. Contractor and workmen shall not be expected to keep gates closed for animals or children, or provide work area security. Customer shall be responsible for keeping the work area free of animals and children. 16.Inspections, Building Department and Engineering Requirements. Contractor will coordinate and attend local building department inspections as needed. Customer is expected to be at the ﬁnal utility inspection if requested by the utility company. If Contractor is required to attend additional or re-scheduled inspections not resulting from the acts or omissions of Contractor, such attendance shall be considered Unanticipated Work and paid for by Customer as provided in Section 15.2 of this Agreement.. Contractor will bill Customer, as Unanticipated Work for any direct expenses and time resulting from any additional building department or engineering requirements including, but not limited to, requirements, as follows: (i) it becomes necessary to prepare for or attend local building department meetings on Customer’s behalf; (ii) revisions must be made to Contractor’s standard plans and drawings; (iii) a structural engineer is required to evaluate Customer’s roof or rack foundation; (iv) soil or geological tests are required; or (v) structural or electrical upgrades must be made to Customer’s existing facility. 17.List of Documents to Be Incorporated into the Contract. 17.1.Drawings, Speciﬁcations, Permits, and Fees. The work to be performed hereunder will be constructed according to the Scope of Work. The Contract Price includes $1,000 for the work necessary to enable Contractor to obtain and pay the associated fees for all required building permits and utility interconnection approval fees for the work. If the actual fees and expenses for such work exceeds such amount, the excess amount shall be a reimbursable expense owed to Contractor by Customer. Contractor will not charge Customer any costs for its own labor in obtaining those permits. All drawings and speciﬁcations are intended to supplement one another and are incorporated by reference to this Contract. 17.2.Notice About Extra Work and Change Orders. Extra work and change orders (“Change Orders”) become part of the Contract once an order is prepared and delivered in writing (which may include delivery by email) and approved by the Parties prior to the commencement of any work covered by the Change Order. The Change Order must describe the scope of the extra work or change, the cost to be added or subtracted from the Contract, and the effect the order will have on the schedule of progress payments. Customer may not require Contractor to perform extra or Change Order work without providing written authorization prior to the commencement of work covered by the new Change Order. Contractor’s failure to comply with the Change Order process does not preclude recovery of compensation for work performed based upon legal or equitable remedies designed to prevent unjust enrichment. If installation is delayed by more than thirty (30) 3 DocuSign Envelope ID: 992517D2-0D3F-4826-8FDA-860F26CB173D Clean Energy Project Agreement 159 Front Street Chicopee, MA 01013 800.620.3370 AllEnergySolar.com 17. days once work has commenced due to acts or omissions of Customer, Contractor will have the option to require a Change Order is executed to account for any additional costs or changes to the construction schedules or may in its sole discretion cancel this Contract. As the clean energy industry is frequently dependent on suppliers’ manufacturing capacity and deliveries to the United States at the time immediately prior to installation, minor variations in parts due to substitutions of like product will result in invoices being adjusted accordingly. For purposes of this Contract, the term “like product” means products of like quality and price-performance to the equipment speciﬁed. 17.3.Attachments. The following are incorporated by reference to this Contract: Scope of Work; List of Work Exclusions; Insurance Notices; and State-Speciﬁc Terms & Conditions. 18.Insurance Coverage. Contractor carries workers compensation insurance as required by law and commercial general liability insurance. Upon request by Customer, Contractor shall provide Customer with a certiﬁcate of insurance verifying such coverage. 19.Title to Equipment and Right to Remove. Title to the equipment and materials supplied by Contractor will remain with Contractor and not pass to Customer until all sums due Contractor have been paid. Contractor may, at its option, remove any portion of materials equivalent in value to any payment required hereunder and not paid within sixty (60) days after receipt of proper invoices thereunder without limiting Contractor’s rights herein. 20.Risk of Loss. Customer shall assume the risk of loss for all materials and equipment which are to be included in Contractor’s work hereunder at such time as the materials and equipment are attached to the Property. 21.Cleanup. Contractor shall keep the project free from accumulation of debris, waste materials, or rubbish caused by its operations. On completion of the work, Contractor will remove all debris, waste materials, rubbish, and surplus material brought on the Property by Contractor from Customer’s property. 22.Limited Warranty. 22.1.Limited Warranty – Repair or Replacement. Contractor warrants the Clean Energy Project against defective workmanship for the following period [ ] months. This warranty provides for no-cost repair or replacement of the Clean Energy Project to the extent the problems requiring replacement or repair results from defects in Contractor’s services under this Contract. Defects in workmanship or otherwise related to or arising from speciﬁc equipment within the Clean Energy Project manufactured by third parties are excluded from Contractor’s warranty obligations. Contractor shall make available to Customer all warranty documents relative to the equipment and materials incorporated in the Clean Energy Project as provided by the applicable manufacturers. If requested by Customer, Contractor will act as the warranty administrator for such manufacturer warranties and will, on a reasonable compensation basis, provide support for Customer in pursuing any manufacturer warranty claims. Repair or replacement as provided under Contractor’s workmanship warranty is the exclusive remedy of Customer against Contractor for defects in workmanship. The workmanship warranty period will not be extended, nor will a new warranty period begin, upon any repair or replacement performed by Contractor under this warranty. 22.2.Exclusions. This limited warranty excludes the following conditions: (i) failure to properly operate or maintain the Clean Energy Project in accordance with printed instructions provided with the Clean Energy Project; (ii) any repair or replacement using a part or service not provided or authorized in writing by Contractor; (iii) damages caused by, in Contractor’s judgment, Customer or third party abuse, accident, alteration, improper maintenance or installation, pre- existing roof conditions, removal by anyone other than Contractor or an authorized Contractor representative, misuse, negligence or vandalism, riots, animal damage, or environmental pollution such as soot, salt damage, acid rain, earthquake, ﬁre, ﬂood, extreme weather conditions such as high wind or frozen water buildup, or other acts of God or other unforeseen conditions that are beyond Contractor’s control; (iv) Clean Energy Projects with the type or serial number(s) altered, removed, or illegible; and (v) cosmetic defects, such as discoloration or scratches, caused by normal wear and tear. Contractor’s Limited Warranty for defective workmanship does not guarantee a speciﬁc power output or, if applicable, storage or charging capacity from the Clean Energy Project or guarantee Customer any return on investment in the Clean Energy Project. 180 4 DocuSign Envelope ID: 992517D2-0D3F-4826-8FDA-860F26CB173D 23.Limitation of Warranty. THE WARRANTIES SET FORTH IN SECTION 22 ABOVE SHALL CONSTITUTE THE ONLY WARRANTIES APPLICABLE TO THIS CONTRACT, THE CLEAN ENERGY PROJECT AND WORK PERFORMED HEREUNDER. CONTRACTOR HEREBY EXPRESSLY DISCLAIMS ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE, USE OR APPLICATION, AND ALL OTHER OBLIGATIONS OR LIABILITIES. UNLESS EXPRESSLY ADDRESSED IN THIS CONTRACT, CONTRACTOR SHALL HAVE NO OBLIGATION TO PERFORM THE SCOPE OF WORK IN A MANNER DESIGNED TO PRESERVE ANY THIRD-PARTY WARRANTIES, EXCEPT FOR THE WARRANTIES FOR ANY EQUIPMENT THAT CONTRACTOR IS PROVIDING AS PART OF THE CLEAN ENERGY PROJECT. 24.No Consequential Damages. EXCEPT TO THE EXTENT EXPRESSLY PROVIDED ELSEWHERE IN THIS CONTRACT, NEITHER CONTRACTOR NOR CUSTOMER SHALL BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, LOSS OF USE, LOSS OF PROFITS, LOSS OF PRODUCTION, OR LOSS OF REVENUES FOR ANY REASON. 25.Limitation of Liability. CONTRACTOR’S SOLE LIABILITY, AND CUSTOMER’S SOLE REMEDY, WITH RESPECT TO ANY WORK AND MATERIALS WHICH BREACH CONTRACTOR’S OBLIGATIONS UNDER THIS CONTRACT SHALL BE FOR CONTRACTOR TO REPAIR, REPLACE OR RE-PERFORM THE DEFECTIVE OR NONCONFORMING WORK AND MATERIAL WITHIN A COMMERCIALLY REASONABLE PERIOD OF TIME AFTER WRITTEN REQUEST BY CUSTOMER. IN NO EVENT SHALL CONTRACTOR’S LIABILITY TO CUSTOMER FOR ANY OTHER TYPE OF CLAIM ARISING FROM CONTRACTOR’S ACTS OR OMISSIONS RELATING TO THE WORK PERFORMED UNDER THIS AGREEMENT EXCEED PAYMENTS MADE BY CUSTOMER TO CONTRACTOR; PROVIDED, HOWEVER, THAT THIS LIMIT SHALL NOT PREVENT CUSTOMER FROM RECEIVING ANY INSURANCE PROCEEDS ACTUALLY MADE AVAILABLE BY CONTRACTOR’S LIABILITY INSURER TO COMPENSATE CUSTOMER FOR SUCH CLAIM. 26.Notice. All notices and other communications permitted or required to be given hereunder shall be delivered or sent by email, facsimile, nationally-recognized courier service, registered or certiﬁed mail, return receipt requested, addressed to the Party at the address set forth below, or to such other address as such Party may designate in writing to the other: If to Contractor: All Energy Solar, Inc. 1264 Energy Lane Saint Paul, MN 55108 Email: info@allenergysolar.com Any such notice shall be deemed to have been given upon the earlier of receipt, the date of delivery for email, one (1) business day following delivery to such nationally-recognized courier service, when sent by conﬁrmed facsimile, if sent during normal business hours of the recipient, if not so conﬁrmed, then on the next business day, or three (3) business days following mailing by registered or certiﬁed mail. 27.Assignment; Third-Party Beneﬁciaries. Customer may not transfer or assign this Contract and its rights and obligations herein to a successor or purchaser of the Property or an interest therein without the prior written consent of the Contractor, which consent should not be unreasonably withheld or unduly delayed. It shall not be unreasonable for Contractor to withhold its consent to transfer or assignment if Customer has not paid the Contract Price in full and performed all other obligations under the Contract or if such transfer or asssignment would increase the cost or risk to Contractor of carrying out its obligations under this Contract. Nothing in this Contract shall be construed to require Customer to obtain Contractor’s consent to any transfer in connection with the Customer’s sale of the Property, so long as Customer has paid the Contract Price in full and performed all its other obligations under the Contract. There are no third-party beneﬁciaries to this Contract. Nothing in this Contract shall create a contractual relationship with or a cause of action in favor of a third-party against either Party. Notwithstanding the above, (i) Contractor may assign this Contract without notice to or consent of Customer in the event of a merger, reorganization, consolidation or sale of all or substantially all of Contractor’s assets, and (ii) if all or any of this Contract is to be ﬁnanced through a ﬁnancial institution, Customer may assign its rights hereunder to such institutions. Customer and Contractor will make, execute and deliver all forms reasonably required by a lender for such purposes. 28.Default. Either of the following occurrences or events, by or against Contractor and by or against Customer, shall constitute a default under this Contract: (a) a material breach of any of the terms, conditions, representations, warranties, or guarantees expressed in this Contract; or (b) ﬁling of a voluntary petition in bankruptcy or confession of insolvency. In the event that a Party is in default of this Contract, and fails to cure such default thirty (30) days following receipt of written notice form the non-defaulting Party that an event of default has occurred, then this Contract may be terminated by the non-defaulting Party. 29.Costs; Attorneys’ Fees. If the Contract Price is not paid when due, Customer shall pay all costs of collection, including reasonable attorneys’ fees. The prevailing Party in any legal action or arbitration proceeding related to this Contract shall be entitled to receive from the other Party, in addition to any other relief that may be granted, their reasonable attorneys’ fees paid to outside legal counsel, costs, and expenses incurred in the action or proceeding. Clean Energy Project Agreement 159 Front Street Chicopee, MA 01013 800.620.3370 AllEnergySolar.com If to Customer: ___________________________________ ___________________________________ ___________________________________ Nancy Sternbach 76 Franklin St Northampton, MA 01060 5 DocuSign Envelope ID: 992517D2-0D3F-4826-8FDA-860F26CB173D Clean Energy Project Agreement 159 Front Street Chicopee, MA 01013 800.620.3370 AllEnergySolar.com Accepted By:Authorized Rep of All Energy Solar Inc.: Signature:Signature: Print Name:Nancy Sternbach Print Name:David D’Onofrio Date Signed:Date Signed: INTENDING TO BE LEGALLY BOUND, the Parties are executing this Contract through their legally authorized representative on the date stated below. 30.Cancellation Damages. If, after Contractor has commenced the work under this Contract and after the expiration of any cancellation period required by the law of the State in which the Property is located, Customer cancels this Contract or refuses to let Contractor proceed with the work for any reason other than Contractor’s material breach of this Contract, Contractor, in addition to exercising any other rights or remedies that are available to Contractor under this Contract or at law or in equity, shall be entitled to recover from Customer payment for all equipment, other materials and labor provided by Contractor and/or that Contractor has obligated itself to pay for in connection with the work under this Contract, reasonable costs of demobilization, and reasonable amounts to compensate Contractor for Contractor’s overhead expense incurred and for lost proﬁt of Contractor resulting from such cancellation. 31.Governing Law. Except to the extent expressly provided otherwise by the laws of the State in which the property is located, or, if applicable, any attached State-Speciﬁc Terms & Conditions, this Contract shall be governed by and interpreted in accordance with the laws of the State of Minnesota. 32.Dispute Resolution; Mediation & Arbitration. In the event of any controversy or claim arising out of or relating to this Contract, or breach thereof, Contractor and Customer shall ﬁrst attempt to resolve it by good faith negotiation, including authorized representatives of Contractor and Customer meeting in person to discuss the issues in dispute within 10 business days after either party provides written notice to the other of such dispute. If the good faith negotiation does not result in settlement of the dispute within 30 days after such meeting, then any unresolved controversy or claim arising out of or relating to this Contract or breach thereof shall be settled by arbitration administered by the American Arbitration Association in accordance with the applicable version of its Construction Arbitration Rules and judgment on the award rendered by the arbitrator(s) may be entered in any court having jurisdiction thereof. Unless agreed otherwise or required otherwise by the law of the State in which the Property is located or unless a different location is set forth in Attachment D, the place of good faith negotiation and arbitration shall be the city in which Contractor’s principal ofﬁce is located in Minnesota, U.S.A. 33.BECAUSE WE HAVE AGREED TO ARBITRATE ALL DISPUTES, NEITHER OF US WILL HAVE THE RIGHT TO LITIGATE OUR DISPUTES IN COURT OR TO HAVE A JURY TRIAL ON THAT DISPUTE, OR ENGAGE IN DISCOVERY EXCEPT AS PROVIDED FOR IN THE ARBITRATION PROCEEDING. THE ARBITRATOR’S DECISION WILL BE FINAL AND BINDING, EXCEPT TO THE EXTENT IT IS SUBJECT TO REVIEW IN ACCORDANCE WITH APPLICABLE LAW GOVERNING ARBITRATION AWARDS. 34.Complete Agreement. This Contract constitutes the entire agreement of the Parties. No other agreements, oral or written, pertaining to the work to be performed under this Contract exist between the Parties. This Contract can be modiﬁed only by an agreement in writing signed by both Parties. 35.Severability. If any provision of this Contract shall be determined to be unenforceable, void or otherwise contrary to applicable law, or in the event that any of the provisions of this Contract are held unenforceable or invalid by any court of competent jurisdiction, such condition shall in no manner operate to render any other provision of this Contract unenforceable, invalid, void or contrary to applicable law, and this Contract shall continue in force in accordance with the remaining terms and provisions hereof. For any provision that is deemed unenforceable or void by the law of the State in which the Property is located, the Contract shall be deemed amended to the extent necessary to render it enforceable and a suitable and equitable provision shall be substituted therefor in order to carry out, so far as may be valid or enforceable, such provision. 36.Cooperation. Customer agrees to fully cooperate with Contractor in Contractor’s performance of the Scope of Work, including without limitation, timely payment and timely provision of requested information and assistance in obtaining any necessary permits or other approvals necessary to permit Contractor to perform the Scope of Work. DO NOT SIGN THIS CONTRACT IF THERE ARE ANY BLANK SPACES. 6 DocuSign Envelope ID: 992517D2-0D3F-4826-8FDA-860F26CB173D 8/19/20228/20/2022 76 Franklin St Northampton. MA 01060 11/8/2022 10/1/2023 200 C51473036 Indemnity Insurance Co. of North America 66D Mainline Dr Westfield, MA 01085 651-842-9404 :(676+25( '(6,*1(1*,1((563& 100 GREAT OAKS BLVD. ͿSUITE 115 ALBANY Ϳ NEW YORK Ϳ 12203 :HVW6KRUH'HVLJQ(QJLQHHUVۅ*UHDW2DNV%OYGۅ6XLWHۅ$OEDQ\1<ۅ 6XEMHFW 6WHUQEDFK5HVLGHQFH )UDQNOLQ6W 1RUWKDPSWRQ0$ 7R:KRP,W0D\&RQFHUQ 7KHIROORZLQJUHIHUHQFHVWKH6WHUQEDFK5HVLGHQFHLQ1RUWKDPSWRQ0$ ([LVWLQJURRIIUDPLQJ 5RRIV&RQYHQWLRQDOIUDPLQJLV[DW´RFZLWKD¶PD[VSDQKRUL]RQWDOUDIWHU SURMHFWLRQ7KLVH[LVWLQJVWUXFWXUHLVFDSDEOHWRVXSSRUWDOOWKHORDGVLQGLFDWHGEHORZIRUWKLV SKRWRYROWDLFSURMHFW 5RRI/RDGLQJ SVIGHDGORDGPRGXOHVSOXVPRXQWLQJKDUGZDUH SVIJURXQGVQRZORDG SVIURRIPDWHULDOVSVI[SVIVKHDWKLQJSVIDVSKDOWVKLQJOHV ([SRVXUH&DWHJRU\%PSKZLQGVHF 7KLVLQVWDOODWLRQGHVLJQZLOOEHLQJHQHUDOFRQIRUPDQFHWRWKHPDQXIDFWXUHU¶VVSHFLILFDWLRQVDQGFRPSOLHV ZLWKDOODSSOLFDEOHODZVFRGHVDQGRUGLQDQFHVVSHFLILFDOO\WKH,QWHUQDWLRQDO%XLOGLQJ&RGH,%& DQG,QWHUQDWLRQDO5HVLGHQWLDO&RGH,5&LQFOXGLQJDOO0$UHJXODWLRQVDQGDPHQGPHQWV7KHVSDFLQJ DQGIDVWHQLQJRIWKHPRXQWLQJEUDFNHWVLVWRKDYHDPD[LPXPRI´RFVSDQEHWZHHQPRXQWLQJEUDFNHWV VWDJJHUHGDQGVHFXUHGXVLQJ´GLDPHWHUFRUURVLYHUHVLVWDQWVWHHOODJEROWVDQGD´PLQLPXPHPEHG 7KDQN\RX :HVWVKRUH'HVLJQ(QJLQHHUV -RKQ(LEHUW1LFRODV1LWWL3( 3URMHFW&RRUGLQDWRU3UHVLGHQW 7R $OO(QHUJ\6RODU '0DLQOLQH'U :HVWILHOG0$ 'DWH1RYHPEHU 5HI COMPANY INFORMATION CLIENT INFORMATION SYSTEM DETAILS PROJECT-PAGE TITLE ALL ENERGY SOLAR, INC 1264 ENERGY LANE ST PAUL, MN 55108 (800) 620-3370 INFO@ALLENERGYSOLAR.COM PAGE NUMBER A0 REVISIONS LAST: 10/17/22 AH AZIMUTH NOTES: 1. (25) ENPHASE IQ7A INVERTER(S) 2. ARRAY 1: 10° TILT, 302° AZIMUTH 3. ARRAY 2: 10° TILT, 302° AZIMUTH 4. ARRAY 3: 10° TILT, 122° AZIMUTH 5. ARRAY 4: 10° TILT, 122° AZIMUTH 6. ARRAY 5: 10° TILT, 32° AZIMUTH COVER PAGE NANCY STERNBACH 76 FRANKLIN ST NORTHAMPTON, MA 01060 PO 58883 N FRANKLIN ST ARRAY 1 ARRAY 2 ARRAY 3 ARRAY 4 REC 400 25 FLUSH ROOF MOUNT 10 Panel Type # of Panels System Size (kW) ARRAY 5 COMPANY INFORMATION CLIENT INFORMATION SYSTEM DETAILS PROJECT-PAGE TITLE ALL ENERGY SOLAR, INC 1264 ENERGY LANE ST PAUL, MN 55108 (800) 620-3370 INFO@ALLENERGYSOLAR.COM PAGE NUMBER A1 REVISIONS LAST: 10/17/22 AH NOTES: 1. ELEVATIONS MAY VARY DEPENDING ON GROUND ELEVATION BUT ARE DRAWN TO THE BEST OF OUR ABILITY 2. 2x6 RAFTERS 24" OC ELEVATION DRAWINGS NANCY STERNBACH 76 FRANKLIN ST NORTHAMPTON, MA 01060 PO 58883 EAST ELEVATION WEST ELEVATION 20'-0"23'-0"20'-5"21'-9"20'-9"22'-1"23'-2"20'-6"22'-9"23'-2"20'-8"23'-4" COMPANY INFORMATION CLIENT INFORMATION SYSTEM DETAILS PROJECT-PAGE TITLE ALL ENERGY SOLAR, INC 1264 ENERGY LANE ST PAUL, MN 55108 (800) 620-3370 INFO@ALLENERGYSOLAR.COM PAGE NUMBER A2 REVISIONS LAST: 10/17/22 AH *STRINGING TO BE DETERMINED ON SITE 2x6 RAFTERS 24" OC RAIL AND STRINGING DIAGRAM AZIMUTH <aCustName(s)> <aCustAddress1> <aCustAddress2> <aCustAddress3> PO <aCustPONumber> N NANCY STERNBACH 76 FRANKLIN ST NORTHAMPTON, MA 01060 PO 58883 2x6 RAFTERS 24" OC (25) REC 400AA MODULES (25) ENPHASE IQ7A INVERTER(S) CIRCUITS: (2) CIRCUIT(S) OF 8 MICROS (1) CIRCUIT(S) OF 9 MICROS ((Qty of circuits with the number of inverters optimizers above)) CIRCUIT(S) OF (Qty of inverters/optimizers in a circuit/string) MICROS ((Qty of circuits with the number of inverters optimizers above)) CIRCUIT(S) OF (Qty of inverters/optimizers in a circuit/string) MICROS ((Qty of circuits with the number of inverters optimizers above)) CIRCUIT(S) OF (Qty of inverters/optimizers in a circuit/string) MICROS SNAP-N-RACK MOUNTING HARDWARE: 1. (70) L-FEET 2. (0) RAIL SPLICES 3. CLAMPS (32) MIDCLAMPS (36) ENDCLAMPS 4. RAIL LENGTHS: (15) 172" RAILS ARRAY 1ARRAY 2 ARRAY 3 ARRAY 4 MAX CIRCUIT LENGTH (120/240V) 15A BREAKER 20A BREAKER ENPHASE IQ7 12 16 ENPHASE IQ7+9 13 ENPHASE IQ7A 8 11 RT MINI ATTACHMENTS ARRAY 5 COMPANY INFORMATION CLIENT INFORMATION SYSTEM DETAILS PROJECT-PAGE TITLE ALL ENERGY SOLAR, INC 1264 ENERGY LANE ST PAUL, MN 55108 (800) 620-3370 INFO@ALLENERGYSOLAR.COM PAGE NUMBER A3 REVISIONS LAST: 10/17/22 AH AZIMUTH ACCOUNT: 40847-41000 PREMISE: N/A METER: 05039409 SITE MAP N NANCY STERNBACH 76 FRANKLIN ST NORTHAMPTON, MA 01060 PO 58883 NOTES: 1. (25) ENPHASE IQ7A INVERTER(S) = 8.725kW AC 2. ARRAY 1: 302° AZIMUTH, 10° TILT (7) REC 400W = 2.8kW 3. ARRAY 2: 302° AZIMUTH, 10° TILT (3) REC 400W = 1.2kW 4. ARRAY 3: 122° AZIMUTH, 10° TILT (8) REC 400W = 3.2kW 5. ARRAY 4: 122° AZIMUTH, 10° TILT (5) REC 400W = 2kW 6. ARRAY 5: 32° AZIMUTH, 10° TILT (2) REC 400W = 0.8kW NOTES: 1. LOCATION OF SERVICE PANEL AND ELECTRICAL EQUIPMENT ARE SHOWN. FINAL LOCATION MAY CHANGE 2. LOCATION OF SERVICE PANEL AND ADDITIONAL ELECTRICAL EQUIPMENT NOT DRAWN TO SCALE 3. PV INTERCONNECTION IS A SECONDARY INTERCONNECTION 4. AC DISCONNECT AND PRODUCTION METER IN READILY ACCESSIBLE LOCATION WITHIN 10' OF MAIN SERVICE METER/UTILITY METER. 24/7 UNESCORTED KEYLESS ACCESS TO BE PROVIDED FOR UTILITY AC DISCONNECT, PV PRODUCTION METER, & UTILITY METER. 5. PV EQUIPMENT SHALL BE INSTALLED IN ACCORDANCE WITH NEC 690 AND POSTED WITH APPLICABLE WARNINGS, SIGNAGE, AND PLAQUES PER NEC 705-10, 690-17, & 690-64 (b)(5). 6. CIRCUITS: (2) CIRCUIT(S) OF 8 (15AMPS EACH) (1) CIRCUIT(S) OF 9 (20AMPS EACH) ((Qty of circuits with the number of inverters optimizers above)) CIRCUIT(S) OF (Qty of inverters/optimizers in a circuit/string) ([Amps] (If Enphase. Based on 15 or 20A breakers)AMPS EACH) ((Qty of circuits with the number of inverters optimizers above)) CIRCUIT(S) OF (Qty of inverters/optimizers in a circuit/string) ([Amps] (If Enphase. Based on 15 or 20A breakers)AMPS EACH) ((Qty of circuits with the number of inverters optimizers above)) CIRCUIT(S) OF (Qty of inverters/optimizers in a circuit/string) ([Amps] (If Enphase. Based on 15 or 20A breakers)AMPS EACH) 1 2 3456 LABELS LOCATED ON PV PRODUCTION METER, UTILITY METER, AC DISCONNECT(S), INVERTER(S), AND APPROPRIATE LABELS ON MAIN ELECTRIC SERVICE. ALL LABELS ARE PERMANENT, WEATHERPROOF, AND DURABLE THERE ARE NO CLEARANCE ISSUES DUE TO OVERHEAD POWERLINES. CALL-OUTS: 1: SOLAR PANELS 2: INVERTERS 3: ENPHASE IQ COMBINER PANEL 4: UTILITY AC DISCONNECT 5: FUSED AC DISCONNECT 6: MAIN ELECTRIC SERVICE 7: UTILITY METER DISTANCES SOLAR PANELS - INVERTERS: 5' MAX INVERTERS - IQ COMBINER PANEL: 50' MAX IQ COMBINER PANEL - UTILITY AC DISCONNECT: 2' UTILITY AC DISCONNECT - FUSED AC DISCONNECT: 2' FUSED AC DISCONNECT - MAIN ELECTRIC SERVICE: 2' MAIN ELECTRIC SERVICE - UTILITY METER: 5' <10' FR A N K L I N S T ARRAY 1 ARRAY 2 ARRAY 3 ARRAY 4 7 ARRAY 5 1 2 1 2 1 2 1 2 COMPANY INFORMATION CLIENT INFORMATION SYSTEM DETAILS PROJECT-PAGE TITLE ALL ENERGY SOLAR, INC 1264 ENERGY LANE ST PAUL, MN 55108 (800) 620-3370 INFO@ALLENERGYSOLAR.COM PAGE NUMBER A4 REVISIONS LAST: 10/17/22 AH *DISTANCES NOT TO SCALE NOTES: 1. DESIGN MEETS NEC CODE AND SHALL BE INSTALLED IN ACCORDANCE WITH NEC 690 AND POSTED WITH APPLICABLE WARNINGS, SIGNAGE, AND PLAQUES PER NEC 705-10, 690- 17, & 690-64 (b) (5) 2. SOLAR MODULES, INVERTERS, AND CORRESPONDING ELECTRICAL EQUIPMENT ARE LISTED. 3. INVERTERS ARE UL 1741 LISTED 4. PV INTERCONNECTION IS A SECONDARY INTERCONNECTION SYSTEM SIZE: 10kW DC MAXIMUM POWER: 8.725 kW AC OPERATING VOLTAGE: 120/240V MAXIMUM CURRENT: 36.25A ACCOUNT: 40847-41000 PREMISE: N/A METER: 05039409 ELECTRICAL LINE DIAGRAM NANCY STERNBACH 76 FRANKLIN ST NORTHAMPTON, MA 01060 PO 58883 TO UTILITY 5' MAX LINETAP VIA POLARIS LUGS ON LINE SIDE OF LOAD PANEL AC DC MURRAY LOAD PANEL SEE LABEL(S) 18 ON FOLLOWING PAGES 120/240V 100A RATED BUS 100A MAIN REC REC400AA PURE BLACK RATED POWER AT STC:400W VMP:42.10V IMP:9.51A VOC:48.80V ISC:10.10A MODULE DETAILS (25) (25) REC 400AA 10kW (25) ENPHASE IQ7A 120/240V (2) CIRCUIT(S) OF 8 (15A EA) (1) CIRCUIT(S) OF 9 (20A EA) ((Qty of circuits with the number of inverters optimizers above)) CIRCUIT(S) OF (Qty of inverters/optimizers in a circuit/string) ([Amps] (If Enphase. Based on 15 or 20A breakers)A EA) ((Qty of circuits with the number of inverters optimizers above)) CIRCUIT(S) OF (Qty of inverters/optimizers in a circuit/string) ([Amps] (If Enphase. Based on 15 or 20A breakers)A EA) ((Qty of circuits with the number of inverters optimizers above)) CIRCUIT(S) OF (Qty of inverters/optimizers in a circuit/string) ([Amps] (If Enphase. Based on 15 or 20A breakers)A EA) INVERTER DETAILS: ENPHASE IQ7A-72-2-US Rating: 349 W CEC Weighted Efficiency: 97 % Max DC Voltage: 58.V V Max AC Output Current: 1.45 A Nominal Voltage Range: 240V / 211-264V (1-Phase) Nominal Frequency: 60 Hz 50' MAX 1" EMT: (6) #10 THWN (1) #10 NEUTRAL (1) #10 GROUND FUSED AC DISCONNECT 1 PHASE, 60A, 120/240V SEE LABEL(S) 10, 16, 18 ON FOLLOWING PAGES 2' EXISTING NATIONAL GRID UTILITY METER 120/240V 1-PHASE, 3-WIRE SEE LABEL(S) 41, 42 ON FOLLOWING PAGES50A2' MAX 1" PVC: (2) #6 THWN (1) #6 NEUTRAL ENPHASE IQ COMBINER PANEL 120/240V 125A 1 PHASE PLACARD INDICATING "NO LOAD TO BE SERVED" SEE LABEL(S) 16, 18, 24 ON FOLLOWING PAGES UTILITY AC DISCONNECT VISIBLE, LOCKABLE, READILY ACCESSIBLE 1 PHASE, 60A, 120/240V SEE LABEL(S) 10, 14, 15, 16, 20, 35 ON FOLLOWING PAGES 50' MAX 1" EMT: (2) #8 THWN (1) #8 NEUTRAL (1) #10 GROUND 2' MAX 1" EMT: (2) #8 THWN (1) #8 NEUTRAL (1) #10 GROUND COMPANY INFORMATION CLIENT INFORMATION SYSTEM DETAILS PROJECT-PAGE TITLE ALL ENERGY SOLAR, INC 1264 ENERGY LANE ST PAUL, MN 55108 (800) 620-3370 INFO@ALLENERGYSOLAR.COM PAGE NUMBER A5 REVISIONS LAST: 10/17/22 AH LABELS ARE WEATHERPROOF, DURABLE, PERMANENTLY MOUNTED, AND COMPLY WITH NEC 690 ACCOUNT: 40847-41000 PREMISE: N/A METER: 05039409 LABELS NANCY STERNBACH 76 FRANKLIN ST NORTHAMPTON, MA 01060 PO 58883 PHOTOVOLTAIC AC DISCONNECT MAXIMUM AC OPERATING CURRENT: NOMINAL OPERATING AC VOLTAGE: P H O T O V O L T A I C A C D I S C O N N E C T MAIN PHOTOVOLTAIC SYSTEM DISCONNECT CAUTION: SOLAR ELECTRIC SYSTEM CONNECTED ! WARNING DUAL POWER SOURCE SECOND SOURCE IS PHOTOVOLTAIC SYSTEM WARNING: PHOTOVOLTAIC POWER SOURCE WARNING! ELECTRICAL SHOCK HAZARD DO NOT TOUCH TERMINALS TERMINALS ON BOTH LINE AND LOAD SIDES MAY BE ENERGIZED IN THE OPEN POSITION RAPID SHUTDOWN SWITCH FOR SOLAR PV SYSTEM 16 13 15 41 42 14 5: EXPOSED DC CONDUIT, JUNCTION BOXES, ECT. 8: 10 HOUSE METER 21 PV PRODUCTION METER TURN RAPID SHUTDOWN SWITCH TO THE "OFF" POSITION TO SHUT DOWN PV SYSTEM AND REDUCE SHOCK HAZARD IN THE ARRAY SOLAR PV SYSTEM EQUIPPED WITH RAPID SHUTDOWN SOLAR ELECTRIC PV PANELS 35 MAXIMUM DC VOLTAGE OF PV SYSTEM 7 PHOTOVOLTAIC DC DISCONNECT 6 ! POWER SOURCE OUTPUT CONNECTION. DO NOT RELOCATE THIS OVERCURRENT DEVICE. WARNING PV SYSTEM CIRCUIT BREAKER IS BACKFED CAUTION 36 37 UTILITY AC DISCONNECT 20 NOTE: LABELS ARE FOR GENERAL REFERENCE. NOT ALL LABELS ARE USED FOR EVERY INSTALLATION. INTERCONNECTION DISCONNECT SWITCH 17 COMPANY INFORMATION CLIENT INFORMATION SYSTEM DETAILS PROJECT-PAGE TITLE ALL ENERGY SOLAR, INC 1264 ENERGY LANE ST PAUL, MN 55108 (800) 620-3370 INFO@ALLENERGYSOLAR.COM PAGE NUMBER A6 REVISIONS LAST: 10/17/22 AH LABELS 2 LABELS ARE WEATHERPROOF, DURABLE, PERMANENTLY MOUNTED, AND COMPLY WITH NEC 690 ACCOUNT: 40847-41000 PREMISE: N/A METER: 05039409 43 18 NANCY STERNBACH 76 FRANKLIN ST NORTHAMPTON, MA 01060 PO 58883 CAUTION:MULTIPLE SOURCES OF POWER: N All Energy Solar www.allenergysolar.com (800) 620-3370 SOLAR ARRAY PV COMBINER PANEL HOUSE SERVICE DISCONNECT (BASEMENT) UTILITY PV DISCONNECT PV SERVICE DISCONNECT INTERCONNECTION DISCONNECT SWITCH 17 DUAL POWER SOURCE PHOTOVOLTAIC CIRCUIT Operating Voltage: 120/240 Maximum Current: 36.25 Amps Maximum Power: 8.725 KW MAXIMUM VOLTAGE MAXIMUM CIRCUIT CURRENT MAX RATED OUTPUT CURRENT OF THE CHARGE CONTROLLER OR DC-TO-DC CONVERTER (IF INSTALLED) 22 24 NOTICEPV COMBINER PANEL ONLY NO LOADS EMERGENCY DISCONNECT SERVICE DISCONNECT 15 rec Alphα® pure Black Series Product Specifications α experience performance 400 wp 20.3 w ft2 ELIGIBLE LEAD-FREE rohs cOMPLIANT www.recgroup.com Ref: PM-DS-12-01-Rev- A 03.21Founded in 1996, REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power. As Solar’s Most Trusted, REC is committed to high quality, innovation, and a low carbon footprint in the solar materials and solar panels it manufactures. Headquartered in Norway with operational headquarters in Singapore, REC also has regional hubs in North America, Europe, and Asia-Pacific. GR GR GR GR GR 1821±2.5 [71.7±0.1] 901 [35.5]460 [18.1]975±2.5 [38.4±0.1]1100 [43.3] 1200 [47.2] 30 [1.2] 22.5 [0.9] 671 ±3 [26.4 ±0.12] 11±0.2 [0.43±0.01]6.6±0.2 [0.26±0.01]20.5±0.5[0.8±0.02] 6.0±0.2 [0.24±0.01] 28 [1.1]1016±2.5 [40 ±0.1]17 [0.7]45 [1.8] Measurements in mm [in]Specifications subject to change without notice.CERTIFICATIONS WARRANTY LOW LIGHT BEHAVIOUR TEMPERATURE RATINGS* MAXIMUM RATINGS Irradiance (W/m²) Typical low irradiance performance of module at STC:Rel. Efficiency (%)Nominal Module Operating Temperature:44°C (±2°C) Temperature coefficient of PMAX:-0.26 %/°C Temperature coefficient of VOC:-0.24 %/°C Temperature coefficient of ISC:0.04 %/°C *The temperature coefficients stated are linear values Standard REC ProTrust Installed by an REC Certified Solar Professional No Yes Yes System Size All ≤25 kW 25-500 kW Product Warranty (yrs)20 25 25 Power Warranty (yrs)25 25 25 Labor Warranty (yrs)0 25 10 Power in Year 1 98%98%98% Annual Degradation 0.25%0.25%0.25% Power in Year 25 92%92%92% See warranty documents for details. Conditions apply ELECTRICAL DATA Product Code*: RECxxxAA Pure Black Power Output - PMAX (Wp) 385 390 395 400 405 Watt Class Sorting - (W)0/+5 0/+5 0/+5 0/+5 0/+5 Nominal Power Voltage - VMPP (V) 41.2 41.5 41.8 42.1 42.4 Nominal Power Current - IMPP (A) 9.35 9.40 9.45 9.51 9.56 Open Circuit Voltage - VOC (V) 48.5 48.6 48.7 48.8 48.9 Short Circuit Current - ISC (A) 9.99 10.03 10.07 10.10 10.14 Power Density (W/sq ft)19.3 19.6 19.8 20.1 20.3 Panel Efficiency (%) 20.8 21.1 21.3 21.6 21.9 Power Output - PMAX (Wp)293 297 301 305 309 Nominal Power Voltage - VMPP (V) 38.8 39.1 39.4 39.7 40.0 Nominal Power Current - IMPP (A) 7.55 7.59 7.63 7.68 7.72 Open Circuit Voltage - VOC (V) 45.7 45.8 45.9 46.0 46.1 Short Circuit Current - ISC (A) 8.07 8.10 8.13 8.16 8.19 Values at standard test conditions (STC: air mass AM 1.5, irradiance 10.75 W/sq ft (1000 W/m²), temperature 77°F (25°C), based on a production spread with a tolerance of PMAX, VOC & ISC ±3% within one watt class. Nominal module operating temperature (NMOT: air mass AM 1.5, irradiance 800 W/m², temperature 68°F (20°C), windspeed 3.3 ft/s (1 m/s). * Where xxx indicates the nominal power class (PMAX) at STC above. GENERAL DATA Cell type: 132 half-cut REC heterojunction cells with lead-free, gapless technology 6 strings of 22 cells in series Glass:0.13 in (3.2 mm) solar glass with anti-reflection surface treatment Backsheet:Highly resistant polymer (black) Frame:Anodized aluminum (black) Junction box:3-part, 3 bypass diodes, IP67 rated in accordance with IEC 62790 Connectors:Stäubli MC4 PV-KBT4/KST4, 12 AWG (4 mm²) in accordance with IEC 62852 IP68 only when connected Cable:12 AWG (4 mm²) PV wire, 43+ 47 in (1.1 + 1.2 m) accordance with EN 50618 Dimensions:71.7 x 40 x 1.2 in (1821 x 1016 x 30 mm) Weight:45 lbs (20.5 kg) Origin:Made in Singapore STC NMOT85 90 95 100 105 200100 300 400 500 600 700 800 900 1000 Operational temperature:-40 ... +185°F (-40 ... +85°C) Maximum system voltage:1000 V Maximum test load (front): + 7000 Pa (146 lbs/sq ft)* Maximum test load (rear):- 4000 Pa (83.5 lbs/sq ft)* Max series fuse rating:25 A Max reverse current:25 A * See installation manual for mounting instructions. Design load = Test load / 1.5 (safety factor) Product SPECIFICATIONS REC ALPHA PURE BLACK SERIEs > Product SPECIFICATIONS IEC 61215:2016, IEC 61730:2016, UL 61730 (Pending) ISO 14001:2004, ISO 9001:2015, OHSAS 18001:2007, IEC 62941 The high-powered smart grid-ready Enphase IQ 7A Micro™ dramatically simplifies the installation process while achieving the highest system efficiency for systems with 60-cell and 72-cell modules. Part of the Enphase IQ System, the IQ 7A Micro integrates with the Enphase IQ Envoy™, Enphase IQ Battery™, and the Enphase Enlighten™ monitoring and analysis software. The IQ Series Microinverters extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty of up to 25 years. Enphase IQ 7A Microinverter To learn more about Enphase offerings, visit enphase.com Data SheetEnphase MicroinvertersRegion: AMERICAS High Power • Peak output power 366 VA @ 240 VAC and 295 VA @ 208 VAC Easy to Install • Lightweight and simple • Faster installation with improved, lighter two-wire cabling • Built-in rapid shutdown compliant (NEC 2014 & 2017) Efficient and Reliable • Optimized for high powered 60-cell and 72-cell modules • Highest CEC efficiency of 97% • More than a million hours of testing • Class II double-insulated enclosure • UL listed Smart Grid Ready • Complies with advanced grid support, voltage and frequency ride-through requirements • Envoy and Internet connection required • Configurable for varying grid profiles • Meets CA Rule 21 (UL 1741-SA) 1. No enforced DC/AC ratio. See the compatibility calculator at https://enphase.com/en-us/support/module-compatibility.2. CEC peak power tracking voltage range is 38 V to 43 V.3. Maximum continuous input DC current is 10.2A. 4. Voltage range can be extended beyond nominal if required by the utility.5. Limits may vary. Refer to local requirements to define the number of microinverters per branch in your area. To learn more about Enphase offerings, visit enphase.com © 2019 Enphase Energy. All rights reserved. Enphase, the Enphase logo, Enphase IQ 7A, Enphase IQ Battery, Enphase Enlighten, Enphase IQ Envoy, and other trademarks or service names are the trademarks of Enphase Energy, Inc. Data subject to change. 2019-11-07 INPUT (DC)IQ7A-72-2-US Commonly used module pairings¹295 W–460 W + Module compatibility 60-cell, 66-cell, and 72-cell PV modules Maximum input DC voltage 58 V Power point tracking voltage range²18 V–58 V Min/Max start voltage 30 V / 58 V Max DC short circuit current (module Isc)³15 A Overvoltage class DC port II DC port backfeed current 0 A PV array configuration 1 x 1 ungrounded array; No additional DC side protection required; AC side protection requires max 20A per branch circuit OUTPUT (AC)@ 240 VAC @ 208 VAC Peak output power 366 VA 295 VA Maximum continuous output power 349 VA 290 VA Nominal (L-L) voltage/range4 240 V / 211–264 V 208 V / 183–229 V Maximum continuous output current 1.45 A (240 VAC)1.39 A (208 VAC) Nominal frequency 60 Hz Extended frequency range 47–68 Hz AC short circuit fault current over 3 cycles 5.8 Arms Maximum units per 20 A (L-L) branch circuit5 11 (240 VAC)11 (208 VAC) Overvoltage class AC port III AC port backfeed current 18 mA Power factor setting 1.0 Power factor (adjustable)0.85 leading ... 0.85 lagging EFFICIENCY @240 VAC @208 VAC CEC weighted efficiency 97.0 %96.5% MECHANICAL Ambient temperature range -40ºC to +60ºC Relative humidity range 4% to 100% (condensing) Connector type: DC (IQ7A-72-2-US)MC4 Dimensions (WxHxD)212 mm x 175 mm x 30.2 mm (without bracket) Weight 1.08 kg (2.38 lbs) Cooling Natural convection — No fans Approved for wet locations Yes Pollution degree PD3 Enclosure Class II double-insulated, corrosion resistant polymeric enclosure Environmental category / UV exposure rating NEMA Type 6 / outdoor FEATURES Communication Power Line Communication (PLC) Monitoring Enlighten Manager and MyEnlighten monitoring optionsCompatible with Enphase IQ Envoy Disconnecting means The AC and DC connectors have been evaluated and approved by UL for use as the load-break disconnect required by NEC 690. Compliance CA Rule 21 (UL 1741-SA)UL 62109-1, UL1741/IEEE1547, FCC Part 15 Class B, ICES-0003 Class B, CAN/CSA-C22.2 NO. 107.1-01 This product is UL Listed as PV Rapid Shut Down Equipment and conforms with NEC-2014 and NEC-2017 section 690.12 and C22.1-2015 Rule 64-218 Rapid Shutdown of PV Systems, for AC and DC conductors, when installed according manufacturer’s instructions. Enphase IQ 7A Microinverter ® www.roof-tech.us info@roof-tech.us RT-MINI Self-flashing base for asphalt & metal roof-top PV mounting systems Dual bolt design: M8 or 5/16” for L-Foot & 1/4” for EMC 1/4” Hex Bolt upper channel Easy tapping screw guide M8 or 5/16” Hex Bolt bottom channel Flat lip for PV Cable clips RT-MINI is suitable for mounting any rail system with a conventional L-Foot. Call Now for more details 858-935-6064 ICC ESR 3575 RT-MINI Flexible Flashing certified by the International Code Council (ICC) Components RT2-00-MINIBK MINI base : 20 ea. Screw : 40 ea. Extra RT-Butyl : 10 ea. RT-Butyl is Roof Tech s flexible flashing used in 550,000 residential PV systems for the last 20 years. It is the first PV mounting system with Flexible Flashing certified by the ICC. ICC ESR-3575 ASTM2140 testing UV testing (7500 hrs.) www.roof-tech.us info@roof-tech.us 10620 Treena Street, Suite 230, San Diego, CA 92131 858.935.6064 Roof Tech Inc. Flexible Flashing 100% Waterproof Metal Flashing Retrofit Shedding water? Ra"er installa#on Deck installa#on ’ P.E. Stamped Letters available at www.roof-tech.us/support PAT : PENDING Dimensions in (mm) (D Y H (D Y H Engineered to ASTM D 1761 (Standard Test Methods for Mechanical Fasteners in Wood) DESCRIPTION: PART NUMBER(S): DRAWN BY: SNAPNRACK, UR-40 RAIL 232-02449, 232-02450, 232-02451 mwatkins Solar Mounting Solutions THE INFORMATION IN THIS DRAWING IS CONFIDENTIAL AND PROPRIETARY. ANYREPRODUCTION, DISCLOSURE, OR USE THEREOF IS PROHIBITED WITHOUT THEWRITTEN CONSENT OF SUNRUN SOUTH LLC. 595 MARKET STREET, 29TH FLOOR ● SAN FRANCISCO, CA 94105 USAPHONE (415) 580-6900 ● FAX (415) 580-6902B REVISION: MATERIALS: DESIGN LOAD (LBS): ULTIMATE LOAD (LBS): TORQUE SPECIFICATION: CERTIFICATION: WEIGHT (LBS): 6000 SERIES ALUMINUM N/A N/A N/A LB-FT UL 2703, FILE E359313 5.85 OPTIONS: CLEAR / BLACK ANODIZED MILL FINISH BUNDLES OF 144 BOXES OF 8 ALL DIMENSIONS IN INCHES UR-40 RAIL PROPERTIES SKU FINISH 232-02449 MILL 232-02450 CLEAR 232-02451 BLACK 1.624 1.500 CENTROID .750 .832 .792 EQUIVALENT PROPERTIES A0.357 in² Ixx 0.125 in⁴ Iyy 0.132 in⁴ Sx (TOP)0.150 in³ Sx (BOT)0.158 in³ Sy (LEFT)0.175 in³ Sy (RIGHT)0.175 in³ SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. INSURER(S) AFFORDING COVERAGE INSURER F : INSURER E : INSURER D : INSURER C : INSURER B : INSURER A : NAIC # NAME:CONTACT (A/C, No):FAX E-MAILADDRESS: PRODUCER (A/C, No, Ext): PHONE INSURED REVISION NUMBER:CERTIFICATE NUMBER:COVERAGES IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s). THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. OTHER: (Per accident) (Ea accident) $ $ N / A SUBR WVD ADDL INSD THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. $ $ $ $PROPERTY DAMAGE BODILY INJURY (Per accident) BODILY INJURY (Per person) COMBINED SINGLE LIMIT AUTOS ONLY AUTOSAUTOS ONLY NON-OWNED SCHEDULEDOWNED ANY AUTO AUTOMOBILE LIABILITY Y / N WORKERS COMPENSATION AND EMPLOYERS' LIABILITY OFFICER/MEMBER EXCLUDED? (Mandatory in NH) DESCRIPTION OF OPERATIONS below If yes, describe under ANY PROPRIETOR/PARTNER/EXECUTIVE $ $ $ E.L. DISEASE - POLICY LIMIT E.L. DISEASE - EA EMPLOYEE E.L. EACH ACCIDENT EROTH-STATUTEPER LIMITS(MM/DD/YYYY)POLICY EXP(MM/DD/YYYY)POLICY EFFPOLICY NUMBERTYPE OF INSURANCELTRINSR DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) EXCESS LIAB UMBRELLA LIAB $EACH OCCURRENCE $AGGREGATE $ OCCUR CLAIMS-MADE DED RETENTION $ $PRODUCTS - COMP/OP AGG $GENERAL AGGREGATE $PERSONAL & ADV INJURY $MED EXP (Any one person) $EACH OCCURRENCE DAMAGE TO RENTED $PREMISES (Ea occurrence) COMMERCIAL GENERAL LIABILITY CLAIMS-MADE OCCUR GEN'L AGGREGATE LIMIT APPLIES PER: POLICY PRO- JECT LOC CERTIFICATE OF LIABILITY INSURANCE DATE (MM/DD/YYYY) CANCELLATION AUTHORIZED REPRESENTATIVE ACORD 25 (2016/03) © 1988-2015 ACORD CORPORATION. All rights reserved. CERTIFICATE HOLDER The ACORD name and logo are registered marks of ACORD HIRED AUTOS ONLY 1,000,000 PPK2395443 03/26/23 PUB808405 X 03/26/22 Automobile Liability MA 1264 Energy Lane BA1S6779992242G CHellman@holmesmurphy.com 2,000,000 Saint Paul, MN 55108 03/26/23 5,000,000 PO Box 9207 10069659CA 03/26/22 chellmanwdsm 03/26/22 64886491 64886491 X A $2,500 BI/PD Ded TRAVELERS CAS INS CO OF AMER STATE AUTOMOBILE MUT INS CO TOKIO MARINE SPEC INS CO X 03/26/23 Des Moines, IA 50306-9207 Saint Paul, MN 55108 03/25/2022 Holmes Murphy & Associates - WDM B 200,000 1264 Energy Lane X All Energy Solar, Inc.19046 25135 23850 1,000,000 X 1,000,000 CSL X X Cara Hellman A 03/25/22 All Energy Solar Inc. 03/25/23 5,000,000 1-800-247-7756 C X 25,000 2,000,000 X USA 1,000,000 © 1988-2016 ACORD CORPORATION. All rights reserved. The ACORD name and logo are registered marks of ACORD CERTIFICATE HOLDER ACORD 25 (2016/03) AUTHORIZED REPRESENTATIVE CANCELLATION DATE (MM/DD/YYYY)CERTIFICATE OF LIABILITY INSURANCE LOCJECTPRO-POLICY GEN'L AGGREGATE LIMIT APPLIES PER: OCCURCLAIMS-MADE COMMERCIAL GENERAL LIABILITY PREMISES (Ea occurrence)$DAMAGE TO RENTED EACH OCCURRENCE $ MED EXP (Any one person) $ PERSONAL & ADV INJURY $ GENERAL AGGREGATE $ PRODUCTS - COMP/OP AGG $ $RETENTIONDED CLAIMS-MADE OCCUR $ AGGREGATE $ EACH OCCURRENCE $ UMBRELLA LIAB EXCESS LIAB DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) INSRLTR TYPE OF INSURANCE POLICY NUMBER POLICY EFF(MM/DD/YYYY)POLICY EXP(MM/DD/YYYY)LIMITS PERSTATUTE OTH-ER E.L. EACH ACCIDENT E.L. DISEASE - EA EMPLOYEE E.L. DISEASE - POLICY LIMIT $ $ $ ANY PROPRIETOR/PARTNER/EXECUTIVE If yes, describe underDESCRIPTION OF OPERATIONS below (Mandatory in NH)OFFICER/MEMBER EXCLUDED? WORKERS COMPENSATIONAND EMPLOYERS' LIABILITY Y / N AUTOMOBILE LIABILITY ANY AUTO ALL OWNED SCHEDULED HIRED AUTOS NON-OWNEDAUTOSAUTOS AUTOS COMBINED SINGLE LIMIT BODILY INJURY (Per person) BODILY INJURY (Per accident) PROPERTY DAMAGE $ $ $ $ THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THISCERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. INSDADDL WVDSUBR N / A $ $ (Ea accident) (Per accident) OTHER: THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THISCERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIESBELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZEDREPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s). COVERAGES CERTIFICATE NUMBER:REVISION NUMBER: INSURED PHONE(A/C, No, Ext): PRODUCER E-MAIL ADDRESS: INSPERITYCERTS@LOCKTONAFFINITY.COM FAX(A/C, No): CONTACTNAME: NAIC # INSURER A : INSURER B : INSURER C : INSURER D : INSURER E : INSURER F : INSURER(S) AFFORDING COVERAGE SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. Acct#:1247244 10/01/2022 Lockton Companies, LLC 888-828-83653657 Briarpark Dr., Suite 700 Houston, TX 77042 Indemnity Insurance Co. of North America 43575 ALL ENERGY SOLAR, INC.DBA ALL ENERGY SOLAR1264 ENERGY LNSAINT PAUL, MN 55108-5225 A C51473036 10/01/2022 10/01/2023 X 1,000,000 1,000,000 1,000,000 ALL ENERGY SOLAR, INC. 1264 ENERGY LNSAINT PAUL, MN 55108