28-052 (4) 640 RYAN RD BP-2019-0957
GIs#: COMMONWEALTH OF MASSACHUSETTS
Map:Block:28-052 CITY OF NORTHAMPTON
Lot: -001 PERSONS CONTRACTING WITH UNREGISTERED CONTRACTORS
Permit: Building DO NOT HAVE ACCESS TO THE GUARANTY FUND (MGL 042A)
Category: ROOF BUILDING PERMIT
Permit BP-2019-0957
Project# JS-2019-001593
Est Cost$24000.00
Fee $40.00 PERMISSION IS HEREBY GRANTED TO:
Const.Class: Contractor: License:
Use Group: JAYSON DUNBAR 099725
Lot Size(sa. R.): 11282.04 Owner: RIMER JOSEPH T&ANTONIA J
zonine: Applicant: JAYSON DUNBAR
AT.- 640 RYAN RD
ApplicantAddress: Phone: Insurance:
6 MORGAN ST (802)463-3585 WC
BELLOWS FALLSVT05101 ISSUED ON.-31612019 0:00:00
TO PERFORM THE FOLLOWING WORK:STRIP & SHINGLE ROOF
POST THIS CARD SO IT IS VISIBLE FROM THE STREET
Inspector of Plumbing Inspector of Wiring D.P.W. Building Inspector
Underground: Service: Meter:
Footings:
Rough: Rough: House# Foundation:
Driveway Final:
Final: Final:
Rough Frame:
Gas: Fire Department Fireplace/Chimney:
Rough: Oil: Insulation:
Final: Smoke: Final:
THIS PERMIT MAY BE REVOKED BY THE CITY OF NORTHAMPTON UPON VIOLATION OF
ANY OF ITS RULES AND REGULATIONS.
Certificate of Occupancy Shmature:
FeeTvpe: Date Paid: Amount:
Building 3/6/20190:00:00 $40.00
212 Main Street,Phone(413)587-1240,Fax: (413)587-1272
Louis Hasbrouck—Building Commissioner
KEU
mpt n steam of Plains: em use only
ins Building Dep rtm t Curb CuWNveway,Permit
FEB 2817ZMon eat SeweDSeptic Availability
I 'l Room 1 0 Water/Well Avegabft
01 60 TWo Sam of Structural Plans
az 41 -587-1272 Folmar Rana
Other SpscMY
APPLICATION TO CONSTRUCT,ALTER,REPAIR,RENOVATE OR DEMOLISH A ONE OR TWO FAMILY DWELLING
SECTION I -SITE INFORMATION
1.1 Property Address: �,�This section to be completed by offla
('1402y..^ 2or•� Mop 'Q. Lot ) Unit
n*rrnet; FLA oto('?- Zone OverlayDNWct
Elm eL District CS Dbtrlet
SECTION 2-PROPERTY OWNERSHIPIAUTHORRED AGENT
2.1 Owner of Record: I
-3oe_i t e..r (zLjc r /40 iL Arm Q w G r n r-LMs 016L2
Name(Pint) Current Mailiw Address:
Telephone
Signature
2.2 Authorized Agent:
V7'oS of
Name(Pring Current Mailing resat
—s. 8o2-L�/L� t-IS7�
SlgneNre � Telephone
SECTION 7-ESTIMATED CONSTRUCTION COSTS
Item Estimated Cost(Dollars)to be Official Use Only
completed by permit applicant
1. Building (a)Building Permit Fee
2. Elecbical (b)Estimated Total Cast of
Construction from 6
3. Plumbing Building Parrott Fee
4. Mechanical(HVAC) 1 U
O, O U
5. Fire Protection
.:� Check Number
This Section For Official Use Only
Date
Building Permit Numb Issued:
Signature: 3-` ZN3
Building Commissionerllnspectcr of Buildings Date
A101;2m1w
EMA L -D A6NhIER OR CONTRA""
�o��'Sp(,�y • C�'l
SECTION 5-DESCRIPTION OF PROPOSED WORK(check all applicable)
New House ❑ Addition ❑ Replacement Windows Alteration(s) 0 Roofing 2f
or Doors ]]
Accessory Bldg. ❑ Demolition ❑ New Signs [0] Decks [q Siding[o] Other[[A
Brief DescoPropetl
4 " am— .J .�3Worka4E. -Se�ero�e5s-1
Alteration of existing bedroom_Yes No Adding new bedroom Yes No
Attached Narrative Renovating unfinished basement Yes No
Plans Attached Rall -Sheet
on.If New hauti Wild of dddidon 6o eXhlinn haulm tbmohke Lhe fol OWMIL
a. Use of building :One Family Two Family Other
b. Number of rooms in each family unit: Number of Bathrooms
c. Is there a garage attached?
d. Proposed Square footage of new construction. Dimensions
e. Number of stories?
I. Method of heating? Fireplaces or Woodstoves Number of each
g. Energy Conservation Compliance. Masscheck Energy Compliance form attached?
In. Type of construction
i. Is construction within 100 It,of wetlands? Yes No. Is construction within 100 yr. floodplain Yes No
j. Depth of basement or cellar floor below finished grade
k. Will building conform to the Building and Zoning regulations? Yes —No.
I. Septic Tank_ City Sewer Private well City water Supply
SECTION 7a-OWNER AUTHORIZATION-TO BE COMPLETED WHEN
OWNERS AGENT OR CONTRACTOR APPLIES FOR BUILDING PERMIT
I, ,as Owner of the subject
property
hereby authorize
to act on my behalf,in all matters relative to work authorized by this building permit application.
Signature of Owner Date
I, (•.-) �-�.. (. f] as Owner/Authorized
Agent hereby declare that the statem is and information on the foregoing application are We and accurate,to the best of my knowledge
and belief.
Signed under the pains and penalties of perjury.
Print Name
2 hs-/I e1
Slgnatureof OwnerlA�� Date
SECTION 6-CONSTRUCTION SERVICES
64 Licensed Construction Supervisor: Not Applicable ❑ p �/
Name of I.I.eseNoldaf: -\n sa n u.h�a f - —
_r License Number
rl I y
Atltlms EgiimlianD�l f'
eNm Telemone
S.Reufatered Nome lea oamerd Contractor: Not Applicable
«'r— 1�fm r e. l C,w F yr r -74y zz
Comoaov Name I Registration Number
Atltlress ~ D O Expiration DI:P 2P
Telephone
SECTION 10-WORKERS'COMPENSATION INSURANCE AFFIDAVIT(M.G.L.a 152,§2506))
'.. Wprkers Compensation Insurance afdavit must be completed and submitted with this application.Failure to provide this affidavit will result
in the denial o Me issuance of the bu,Id,ng permit.
Signed Affidavit Attached Yes....... 99 No__.. ❑
City of Northampton
,...�o
Massachuaetta
c
:l s
DNPMSHENT OF BUILDING INSPNOTIONS
212 Main atzaat • Municipal Buildingopf
Noctasmpton, M 01060
AFFIDAVIT
Home Improvement Contractor Law
Supplement to Permit Application
The Office of Consumer Affairs and Business Regulation("OCABR")regulates the registration of contractors and
subcontractors performing improvements or renovations on detached one to four family homes.Prior to
performing work on such homes,a contractor must be registered as a Home Improvement Contractor("HIC").
M.G.L.Chapter 142A requires that the"reconstruction, alteration,renovation, repair, modernization, conversion,
improvement,removal,demolition, or construction of an addition to any pre-existing owner-occupied building containing
at least one but not more than four dwelling units....or to structures which are adjacent to such residence or building"be
done by registered contractors.
Note:/f the homeowner has contracted with a corporation or LLC,that entity must be registered
Type of Work: a.V t.-!.� II Est. Cost: `02y' &-1
s
Address of Work ( �)O Qys Pool Ftc e—
Date of Permit Application: 2/L$64
I hereby certify that:
Registration is not required for the following reason(s):
_Work excluded by law(explain):
_Job under$1,000.00
_Owner obtaining own permit(explain):
_Building not owner-occupied
Other(specify):
OWNERS OBTAINING THEIR OWN PERMIT OR ENTERING INTO CONTRACTS WITH UNREGISTERED
CONTRACTORS OR SUBCONTRACTORS FOR APPLICABLE HOME IMPROVEMENT WORK ARE NOT
ELIGIBLE FOR AND DO NOT HAVE ACCESS TO THE ARBITRATION PROGRAM OR GUARANTY FUND
UNDER M.G.L.Chapter 142A.SUCH OWNERS ALSO ASSUME.THE RESPONSIBILITES FOR ALL WORK
PERFORMED UNDER THE BUILDING PERMIT.SEE NEXT PAGE FOR MORE INFORMATION.
Signed under the penalties of perjury:
I hereby apply for a building permit as the agent of the owner:
As 'I 2 rS 1-7`1L1t
Date Contractor Name HIC Registration No.
OR:
Notwithstanding the above notice,I hereby apply for a building permit as the owner of the above property:
Date Owner Name and Signature
City of Northampton
..-.._.
Massachusetts
of i
DEPARTMENT OF aVLLDLNG INSPECTIONS
212 l in ssseet e ici 1 suiltl n(Q t
9orth ton, NA 01060 S
Debris Disposal Affidavit
In accordance of the provisions of MGL c 40, S54, I acknowledge that as a condition of the building
permit all debris resulting from the construction activity governed by this Building Permit shall be disposed
of in a properly licensed solid waste disposal facility, as defined by MGL c 111, S 150A.
The debris from construction /work being performed at:
(Please print house number and street name)
Is to be disposed of at:
�e print name and location of facility)
Or will be disposed of in a dumpster onsite rented or leased from:
(Company Name and Address)
Signature of Permit Applicant or Owner Date
If,for any reason, the debris will not be disposed of as indicated, the Applicant or Owner shall notify the
Building Department as to the location where the debris will be disposed.
Information and Instructions
Massachusetts General Laws chapter 152 requires all employers to provide workers'compensation for their employees.
Pursuant to this statute,an employee is defined as"._every person in the service of another under any contract of hire,
express or implied,oral or writer."
An employer is defined as"an individual,partnership,association,corporation or other legal entity,or any two or more
of the foregoing engaged in ajoint enterprise,and including the legal representatives of a deceased employer,or the
receiver or trustee of an individual,partnership,association or other legal entity,employing employees. However the
owner of a dwelling house having not more than three apartments and who resides therein,or the occupant of the
dwelling house of another who employs persons to do maintenance,construction or repair work on such dwelling house
or on the grounds or building appurtenant thereto shall not because of such employment be deemed to be an employer."
MGL chapter 152,§25C(6)also states that"every state or local licensing agency shall withhold the issuance or
renewal of a license or permit to operate a business or to construct buildings in the commonwealth for any
applicant who has not produced acceptable evidence of compliance with the insurance coverage required."
Additionally,MGL chapter 152,§25C(7)states"Neither the commonwealth nor any of its political subdivisions shall
enter into any contract for the performance of public work until acceptable evidence of compliance with the insurance
requirements of this chapter have been presented to the conducting authority."
Applicants
Please fill out the workers'compensation affidavit completely,by checking the boxes that apply to your situation and,if
necessary,supply sub-cuntraetor(s)name(s),address(es)and phone numbers)along with their certificate(s)of
insurance. Limited Liability Companies(LLC)or Limited Liability Partnerships(LLP)with no employees other than the
members or partners,are not required to carry workers' compensation insurance. [fan LLC or LLP does have
employees,a policy is required. Be advised that this affidavit may be submitted to the Department of Industrial
Accidents for confirmation of insurance coverage. Also he sure to sign and date the affidavit. The affidavit should
be retained to the city or town that the application for the permit or license is being requested,not the Department of
Industrial Accidents. Should you have any questions regarding the law or if you are required to obtain a workers'
compensation policy,please call the Department at the number listed below. Self-insured companies should enter their
self-insurance license number on the appropriate line.
City or Town Officials
Please be sure that the affidavit is complete and printed legibly. The Department has provided a space at the bottom
of the affidavit for you to fill out in the event the Office of Investigations has to contact you regarding the app]icant.
Please be sure to fill in the permit/license number which will be used as a reference number. In addition,an applicant
that must submit multiple permit/license applications in any given year,need only submit one affidavit indicating current
policy information(if necessary)and under`Job Site Address"the applicant should write"all locations in_(city or
town)."A copy of the affidavit that has been officially stamped or marked by the city or town may be provided to the
applicant as proof that a valid affidavit is on file for future permits or licenses. Anew affidavit must be filled out each
year.Where a home owner or citizen is obtaining a license or permit not related to any business or commercial venture
(i.e.a dog license or permit to bum leaves etc.)said person is NOT required to complete this affidavit.
The Department's address,telephone and fax number:
The Commonwealth of Massachusetts
Department of Industrial Accidents
1 Congress Street, Suite 100
Boston,MA 02114-2017
Tel.#617-7274900 ext. 7406 or 1-877-MASSAFE
Fax#617-727-7749
Revised 02-23-15 vvWWmass.gov/dia
AC"RbF CERTIFICATE OF LIABILITY INSURANCE
3IYB12018
THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER THIS
CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES
BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED
REPRESENTATIVE OR PRODUCER AND THE CERTIFICATE HOLDER
IMPORTANT: If the certmute holder N an ADDITIONAL INSURED,the policy(IHj must be enlloned. If SUBROGATION IS WAIVED,subject to
the tame and conditions of Me policy,certain policies may require an endorsement A statement on this mN mm time not confer rights to the
DerdBcets holder in lieu of such endonemen s.
PRODUCER CONTACT
NAME:
Clark-Morlenson Insurance P OME 603-_352-2121 _ Fli xo:603-357-8491
.
P.O.Box 606 EMAIL
Keene NH 03431 ADDRESS, PU24EBXII-morlenson.w in
_MS_UME 9 AFF°M°NG COVERAGE NAICs
I...BA:Acadia Insurance _ _ 31325
INSURED J'WCEWICZI INSURER.:
Home Improvement Co.of Vermont, Inc.
dba Jancewicz&Son I...RO'.
6 Morgan Street INSURER o:
Bellows Falls VT 05101
INSURER..
INSURER
COVERAGES CERTIFICATE NUMBER:1117511057 REVISION NUMBER:
THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD
INDICATED. NOTWITHSTANDING ANY REQUIREMENT,TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS
CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS,
EXCLUSIONS AND CONDITIONS OF SUCH POLICIES.LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CI-AIMS.
ILBmR PEOFImUNUAN0E MEND gCOL MEND F.L YNUMBER Irma WV XMn) E%P I LIMITS
X COMMER°WLGENEIM.�LILPMI Y CPANMSZW9 39111.1. AG1FM19 EACHCCCURRENCE 51000,W]
CLAIMSMPOE uCCCUR PREMISE Er.—YEI s.o.
050 MEDEXPIMyoneinsi 55000
PERSONAL B AW INJURY $,.Jr._- _.
.0.
POLICY
LIMIT APPLES PER'. GENERgLAGGREGATE $?000 _
GEN'L AGGREGATE f _ _
X Q LOC PRODUCTS-COMPNPAGG M?000 Go
��'FL-.
OTHER I
• AUTOMOBILE LMBIUW rAAUUI 1U.rU8 31]1.HS COMBINED SINGLE I'M" UEU Or
enl $1
AMR..
XANY AUTO BODILY INJURY(Per Porion) M
ALL OWNED SOHEDVIED BODILY INJURY(Pa—per) M
AUTOS _AUTOS
-Y XIREOAUi� X '.AUTOS
OWNED PROPERTV°AMAGE $
UTAS IPeravgen9___ _
s
X UMBRELLA LAO OCCUR LW03.Oohn 1]i R01. 131Rm9 EACH CC_CURREN_CE $201A Y
a �
CLAIMSMPDE I AGGREGATE f?.00.
DEFxCeS6 uqO X RETENTION$ I
A WORNERSCOMPENYPCN ViDDIMO6616 .,.,,A ]111.019 I X STATUTE ETH_
AND EMPLOYERS'WWLIIZ Y/N - -
ANY PROPRIETOIVPARTNER/E%ECUTIVE EL EACH ACCIDENT I1.A,
OFF CERNEMBE R EXCLUDED? ON/A
IMeI R ENXl E I OJEEASE-EA EMPLOYE IGAo0
ep.NeeNm -
DESCRIPTONI OFOPERATIONS Below 'eL.DISEASE-Poucv uMlr ss.,00D
II
DESCRIPnON OF OPERATIONS 1 URI1 VERICLEM(ACRES)101.APHI Hemw S=IRNIK mey Ne IRANIAN llmwe ePed is RN'Am41
Workers Comp laws apply for the states of:MA,NH,VT
No excluded offlcen
PROOF OF INSURANCE
CERTIFICATE HOLDER CANCELLATION
SHOULD ANY OF TIE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE
THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN
ACCORDANCE WITH THE POLICY PROVISIONS.
SAMPLE ONLY
CERTIFICATE TO BE REQUESTED AUmORa DREPRESENTAn
xxxxxx xx xxxxx ` „
01988-2014 ACORD CORPORATION. All rights reserved.
ACORD 25(2010101) The ACORD name and logo are registered marks of ACORD
63 gam aq
6 Morgan Street • Bellows Falls • Vermont• 05101 • (802)463-3585
R,A, ..
Standing Seem ,
Asphalt Shingle
Metal Shingle t ,: ,
h ngla
Si4eply RV,
. ✓�` A
Rubber
ShMsg
bwyl �. AL
Storm S € Y 4. x.
6
Windowoo
Windows&Drs
Replacement
Strom
PREPARED FOR:Joe& Toni Ruler 7.10.1 FobrlcnHon JOB LOCA TION.
•
Re. .bans& 640 Ryan Road 640 Ryan Road
r aaadeaov Florence, MA 01062 Florence, MA 01062
Is
PREPARED BY:
Nate Shipman
Jancewicz & Son
www.roofsolus.com
EXTERIOR EVALUATION:
The existing shingle roofing on the front of the main house are showing signs of deterioration as evidenced by
the de-granularization occurring on the shingle. There is also lichen beginning to take hold on the roof plane.
r _
T
iyM .
ri
� W
4 5 3
There is significant de-granularization occurring on the porch roof.
yy r�
'wry` z� },, rok•' ��' ,m' r
n r a
��,� by
k
S
r f ti
EXTERIOR EVALUATION:
There is one vent pipe protrusion through the roof plane. The flashing detail on these pipes include a rubber
gasket that can be prone to premature failure. This proposal includes Jancewicz& Son furnishing and installing
a vent pipe sleeve from 24-gauge Kynar painted galvalume for a watertight fit
t�
J
This proposal includes removing siding where the roof meets sidewall and headwall junctures. Our Craftsmen
will remove the existing flashing, install Ice & Water Shield up the sidewall and headwall,and install new 24-
gauge Kynar painted Galvalume flashing. The siding will be reinstalled with new grooved western red cedar
shingles with a two-coat color matched finish. The homeowner will provide the color match paint prior to the
start of work to allow our craftsmen to paint the shingles prior to installation. If the color is unknown,
Jancewicz & Son can color match on an additional work order basis.
411
'S ae 5
YK Yt. gi
.X2 sTi jV. � .yh
Sr-
d '4
� L �
M {
t
This project has been specified in accordance with local building codes, industry
standards and manufacturer specification requirements. All work will be installed
by certified craftsmen to assure qualification for the long-term roofing warranty.
We at Jancewicz & Son understand that for most people this may be your first experience
with a major home improvement project. With that in mind, we want to offer you this list
of"what to expect" during your home improvement project. We hope this will help to avoid
any confusion or problems before, during and after we arrive to complete your project.
Scope of Work to be Performed:
• Install property protection measures to include staging to the eave edge.
• Remove,haul,and dispose of existing asphalt shingle roofing(optional for standing seam, required
for asphalt shingle).
• Remove cedar shingle siding at sidewall junctures to receive new ice and water shield and flashing
detail
• Furnish and install new rooftopguard underlayment on all roof surfaces with the exception of the
locations to receive HT Metalman ice and water shield.
• Furnish and install HT Metalman ice and water shield around all protrusions.
• Install custom fabricated vent pipe sleeve from 24-gauge Kynar painted galvalume.
• Install custom fabricated drip and rake edge and sidewall flashing from 24-gauge Kynar painted
galvalume.
• Furnish and install a 24-gauge Kynar painted galvalume double-lock standing seam roof system.
• Install two-coat color matched grooved Certilabel western red cedar shingles at sidewall junctures.
• Option to furnish and install gutters and gutter cap system on the eave edge of roof.
General Specifications:
1. At the end of each day,the working area will be made watertight to protect the building from normal
weather conditions.
2. The work area will be cleaned of all roofing debris during and broom cleaned after job completion.
3. The work area will be magnetically swept to pick-up any leftover nails afterjob completion.
4. All gutters pertaining to the work area will be cleaned of all debris after job completion.
5. All work performed by Jancewicz& Son will be in accordance with manufacturer's recommendations and
guidelines set by the National Roofing Contractors Association(NRCA)and the local building codes.
6. Jancewicz& Son extends to its customers a(5) year workmanship warranty to supplement any applicable
manufacturer's warranty programs.
Perimeter Ed¢e Flashing (Drib Ulm):
Eave Drip Edge Flashing:
Install 24 gauge Kynar painted Galvalume drip edge on all eave edges beneath underlayment to facilitate
water runoff'into gutters or away from house.
Rake Drip Edge Flashing:
Install 24 gauge Kynar painted Galvalume drip edge on all rake edges on top of underlayment to protect
against wind driven rain.
Ice & Water Shield:
Areas Ice& Water Shield is to be installed:
Install (36') of Englert Metalman HT Ice &
Water Shield around all roof penetrations
including chimneys, Skylights &vent pipes.
Additional areas Ice& Water Shield is to be
installed:
Ice and Water Shield will also be installed in
the valleys areas extending a minimum of 6'
from the center of the valley up the roof slope. 6:3
Englert Metalman:
The Englert Metalman HT Self-Adhesive Roof Underlayment is a 40-mil(1-mm)waterproofing
membrane composed of SBS
modified bitumen and a tough, -
ultraviolet-resistant, anti-slippolyethylene woven woven top facer.
hi
The membrane is designed for
use in high-temperature _
environments where the in-
service temperature can reach
as high as 250F (136 Q. The ^ 'j. �,. .,A dl ��-„�;•
self-sealing,high tensile
strength underlayment is �'
/ J�\
designed to provide 4
waterproofprotection before,
during and after the y+'
installation of metal roofing.
The slip-resistant material is
100 percent UV protected and features a silicone release film backing that protects the product
from degradation and allows it to be stored outside without the need for a cardboard box.
Ventilation:
As required by buildine codes and The National Roofing Contractors Association your roofing system will require
the followine ventilation:
• All insulated attic spaces shall be ventilated with openings to the exterior of not less than I square foot of ventilation
for every 300 square feel of attic floor space. This must be balanced equally between the soffit and the ridge of your
home.
• All ventilation shall be designed to prevent the entry of rain and snow and insects.
The existing ventilation will remain with the exception of a vented ridge cap being installed where possible.
Good ventilation creates a cooler attic in the summer and a drier attic in the winter and it helps prevent ice dams. In a home
with poor ventilation the heat in the attic may eventually reach 140 degrees on a 90-degree day. Also,an overheated attic
combined with moisture,can be damaging to the roof decking,and roofing material. In the winter,the moist warm air from
the lower portions of your home rise through the ceiling area into the attic. In the cold attic the warm moist air condenses
on the cold surface of the rafters,the nails and other metal,and the attic side of the roof deck.
This moisture can create several Problems:
• The condensation can swell the roof deck, causing waviness and buckling of the roof deck and possibly the roofing
material.
• This high level of condensing moisture may also promote a Perfect mold-breeding environment — which leads to
replacing the affected roof decking and correcting the ventilation problem.
• The water can rot the roof deck and decrease nail or screw-holding capability.
• Severe condensation can drip onto the insulation,reducing its effectiveness and seep through the ceiling.
• Ice dams develop when warn air finds its way into the attic and gets trapped along the underside of the roof deck. The
warts air then melts the snow above it and water runs down the slope towards the eaves. As the water trickles past the
lower and unheated sections of the roof near the eaves, it freezes. This wall of ice continues to build forming an even-
larger ice dam. The pond of water continues to get deeper and deeper until it backs up under the shingles,causing leaks
and perhaps damage to the roofing material and the roof deck. When the water gets below the deck,it can leak through
the ceiling to cause all kinds of unsightly damage and even structural weakening to your home.
Good ventilation will move the hot air near to the roof deck out of the attic in the summer, and will dilute and remove
the moist air in the winter before U causes damage. Also,proper ventilation and sufficient insulation helps keep a more
uniform temperature on the underside of the roof deck in the winter,which eliminates ice dam formations.
All Metal Roofing Manufacturers state that proper ventilation must be installed according to their
minimum requirements or the warranties may be null and void
As you can well imagine, a good place for a leak to develop is anywhere there is a penetration through the roof. To help
prevent these leaks from occurring, corrosion-resistant metal (aluminum, copper or coated steel) flashing is typically
applied. Metal flashing is effective, because when properly installed, it can help accommodate roof, chimney, wall, or
structural movements due to settling,expansion,and contraction.
Gutter Removal:
Jancewicz& Son will remove and recycle existing downspouts and hardware. In most cases removal is simple;however,
occasions may arise when the safe removal requires additional labor or precautions. In these instances,the Project
Manager has been instructed to advise you of any risks, difficulties,or potential additional charges.
Remove and haul away existing gutters and downspouts from the back side of the home that is receiving new roofing
material.
Fascia Prenaration:
The fascia is the structural surface at the bottom edge of a roof onto which gutters are supported and/or attached. The fascia
should be a planar,secure,and solid surface,which will permit secure fastening of the gutter and hangers. The fascia should
be at least'W'thick and not less than 6"wide. The fascia must be strong enough to:
• Support the gutter materials.
• Hold uniform loads.
• Provide resistance to wind force.
• Anchor the fasteners.
Jancewicz& Son will not take the responsibility for:
• Poor fascia design that causes damage to the gutter system or other parts of the house.
• Defects or damage caused by the fascia material,over which the gutters are applied.
• Damage to the gutters caused by settlement, distortion, failure, or cracking or any other deficiency of the fascia or
underlying structure.
Jancewicz& Son will.
1. Inspect fascia before the installation of the new gutters and re-nail protruding nails.
2. Replace rotted or damaged fascia boards. (extra)
3. Any replacement of rotted or damaged framing or finishing lumber charged at a time& material basis.
Labor will be charged at a rate of$75 per man hour plus material(extra)
Jancewicz& Son will notify the customer Prior to oroceedine with any additional work.
Gutter Fabrication:
On-Site Fabrication: Fabrication
All gutter sections will be extruded on-site for
continuous seamless 0.032 aluminum sections
Hangers
Gutter Handers:
Specialty Hangers:
Jancewicz& Son installs hidden hangers at approximately
16" intervals. (The recommended minimum distance is 24").
Flasbing
Gutter Flashing:
Gutter Flashing:
Jancewicz & Son will install 0.19 aluminum gutter flashing under the
starter course of shingles or under the drip edge flashing if present. The
flashing will extend over the back edge of the new gutter preventing
water from naming behind the gutter resulting in rotten fascia and/or _
soffit.
Gutter Protection: t
{
Gutter Cap '
Where selected, Jancewicz& Son will install Gutter Cap or Gutter Roof
gutter protection.
!a
YOUR ROOFING INVESTMENT
• Install property protection measures to include staging to the cave edge.
• Remove, haul, and dispose of existing asphalt shingle roofing(optional for standing seam, required
for asphalt shingle).
• Remove cedar shingle siding at sidewall junctures to receive new ice and water shield and flashing
detail
• Furnish and install new rooftopguard underlayment on all roof surfaces with the exception of the
locations to receive HT Metalman ice and water shield.
• Furnish and install HT Metalman ice and water shield around all protrusions.
• Install custom fabricated vent pipe sleeve from 24-gauge Kynar painted galvalume.
• Install custom fabricated drip and rake edge and sidewall flashing from 24-gauge Kynar painted
galvalume.
• Furnish and install a 24-gauge Kynar painted galvalume double-lock standing seam roof system.
• Install two-coat color matched grooved Certilabel western red cedar shingles at sidewall junctures.
Option to furnish and install gutters and gutter cap system on the cave edge of roof.
24 GAUGE DOUBLE-LOCK STANDING SEAM ROOF SYSTEM OVER EXISTING ROOF SYSTEM
Install RoofropGuard.
Install Ice and Water Shield in appropriate areas.
Install a 24-gauge double-lock standing seam roof system.
35-year finish warranty.
90 mph wind uplift rating.
Accepted Rejected $19.185.00
Initial In al
24 GAUGE DOUBLE-LOCK STANDING SEAM ROOF SYSTEM WITH REMOVAL OF EXISTING
ROOF SYSTEM
Remove existing roofing down to roof deck or as noted above.
Install RoofropGuard.
Install Ice and Water Shield in appropriate areas.
Install a 24-gauge double-lock standing seam roof system.
35-year finish warranty.
90 mph wind uplift rating.
Accepted Rejected $20.685.00
I al Initial
GUTTER AND GUTTER CAP SYSTEM
Accepted Rejected $3.960.00
1 ral Initial
This Proposal is based upon current material and labor cost. This Proposal may be withdrawn if not accepted within ten(10)days.
Nate Shipman
3ancewicz&Son
TERMS AND CONDITIONS
1. Agreement: This Agreement is between lancewicz& Son(the"Company")and the homeowner(the"Owner")and/or their agents. The
Company agrees to do the work(the"Work")contained herein for the Owner. The Work shall not include testimony in court jor any
reason
2. Payment of Funds and Deposit: Owner hereby agrees to pay Company for the Work in cash equivalents,unless otherwise agreed upon in
writing. Owner agrees to pay Company a deposit of 33%at the time of the execution of this Agreement,33%due at half completion with
the balance due upon either the Completion Date as defined herein or upon Substantial Completion as defined herein. Substantial Completion
shall mean if only certain minor items of Work are incomplete;the cost ofthose items may be withheld from the final payment at the Owner's
option until such items are completed. No jobs will be scheduled or started without a deposit without management approval. All payments
made pursuant to this Agreement shall only be made to Company.
3. Late Payment/Service Charge: Any funds owed greater than 30 days beyond the Completion Date are subject to a service charge of one
and one-haWperccut(11/2%)per month on the unpaid balance.
4. Work Schedule: All details ofjob(shingle style&color,aluminum colors,etc.)..at he finalized orior to being placed on our schedule.
Company agrees to perform the Work in a good and workmanlike manner with reasonable dispatch in accordance with the specifications
contained herein. Company shall commence Work approximately within 30 days of delivery of materials,allowing time for reasonable
delays of which Company is not responsible. The Company is responsible for establishing scheduling and sequencing of the Work to be
performed. Reasonable delays include,but are not limited to,weather,non-delivery,discontinuance,default in shipment by a supplier in
whole or in part,loss in transit,strike&lockouts or other causes beyond Company's control.
5. Materials: Company shall provide necessary labor,materials,and sales lax on materials to complete the Work as specified. Company shall
not be responsible for an exact match of any materials,including but not limited to,rooting,siding,metal work and shingle shading. All
materials shall remain the property and title ofthe Company until fully paid by Owner. All surplus materials shall remain the property ofthe
Company unless, at Company's option, lamed over to the Owner upon the completion of the Work. Company is not responsible for
replacement of any lumber, sheathing, trim or rotted wood, or replacement parts in excess of the agreed amount unless specified in this
Agreement The Company may, in its own discretion,substitute materials to be used in the Work. Ifdetermined by Company,during the
performance of the Work,that additional labor and materials are required beyond when is specified in this Agreement in order on complete
the Work,the cost for the additional labor and materials will be home by Owner.
6. Changes in Contract: The Owner hereby expressly amborizes any of his joint signatories, if there be any,or any of his agents,servants
employees, attomeys-in-fact, or personal representatives to execute and deliver to the Company any written additional change order
(hereinafter the"Change Order")and any other documents necessary to consummate this Agreement,which shall be binding and conclusive
on said Owner.Owner hereby acknowledges that any Change Orders,requested by Owner and approved by Company pursuant to this section
of this Agreement,shall be paid as per the terms of the Company's Change Order policy. Any changes made to this Agreement as required
by regulatory agencies will be at additional cost to the Owner, unless such changes or additions are cited in this Agreement. Furthermore,
by signing below,Owner acknowledges that no change has been made to this Agreement by any salesperson or other agent of Company on
behalfof Owner.
7. Owner Responsibilities: Owner warrants to Company that he is the legal owner ofthe Property. Owner agrees to provide to Company at
no charge, electric power and water for constmction purposes. Owner acknowledges that the removal of permanently attached building
materials often disturbs and vibrates the existing Property. The debris generated from this Work and related procedures may cause
inconvenience or discomfort which is normal construction wear and tear conditions,and not Company negligence and may include,but is
not limited to,interior wall cracks,flaking of wall paint,debris falling into an attic,disturbance to shrubbery and lawns,small divots in the
driveway from equipment such as rolloff trash containers and dump track. As a precaution,Owner shall remove from walls or ceilings,
items such as,but not limited to,chandeliers,paintings,and plates. Owner shall lock away or secure other items ofvalue in or on the Property.
Owner shall make himself available during construction for clarification of specifications, approval of additional Work and to provide
adequate access to the Property as may be required.
8. Cancellation of Agreement: Should Ownercancel this Agreement for any reason pricrto the Rescission Date ofthis Agreement,Company
shall return to Owner all payments made under this Agreement within ten(10)days ofmceipt ofthe Notice of Cancellation ofthis Agreement
which is incorporated herein and made a part hereof. If the Agreement is breached thereafter without consent of the Company, liquidated
damages of20%ofthe cash price ofthe Work,plus a proportionate share of all Work already performed will be due the Company. To cancel
this Agreement mail or deliver a signed and dated copy ofthe Cancellation Notice or other written notice to the Company at its address noted
on this Agreement no later than midnight ofthe third business day from the date of this Agreement
9. Default: Owner shall be in default ofthis Agreement al anytime ifhe does not tender payments as listed in section 2&6 ofthis Agreement.
Upon Owner's default, the Company may immediately discontinue Work and the entire balance shall be immediately due and payable.
Waiver or indulgence of any default shall not operate as a waiver of any other default on future occasions.
10. Attorneys'Fees: In the event that legal proceedings are instituted for the recovery ofthe unpaid Agreement price and any additional charges
due,the Owner agrees to reimburse all actual costs,expenses and attorneys'fees incurred by the Company.
11. Company Warranty: In order for any warranty to be effective against Company or any other party,Owner must: (1)have paid all sums
owed to Company under this Agreement and any applicable Change Orders: (2)provide by immediate(or 10 days)written notice,by certified
mail,to Company upon discovering any defect or failure ofthe Work performed and: (3)not allowed any third party to,in any way,alter or
repair any of the Work performed by Company. Company shall provide Owner with a warranty against defects in workmanship for a period
contained herein from the Completion Date. Material warranty shall be limited to manufacturers warranty of materials. Company does not
NOTICE OF CANCELLATION
The Owner and Company have the option to renegotiate or cancel this Agreement at any time for any reason
within three (3) business days from the date of this Agreement. If the Agreement is cancelled within this time,
any deposits will be returned to you without penalty following receipt by the Company of the Cancellation Notice.
If the Agreement is breached thereafter without consent of the Company, liquidated damages of 20%of the cash
price of the Work,plus a proportionate share of all Work already performed will be due the Company. To cancel
this Agreement, mail or deliver a signed and dated copy of this Cancellation Notice or other written notice to the
Company at its address noted on this Agreement no later than midnight of the third business day from the date of
this Agreement.
I hereby Cancel Date:
x (Signature)
(Printed Name)
x (Signature)
(Printed Name)