10260 - 2901Not For Construction 10260 - 1
2901 - Northampton, Massachusetts - 1452013 April 21, 2015
UniSpec II- Store Planning 022213
SECTION 10260 - WALL AND CORNER GUARDS
PART 1 - GENERAL
1.1 SUMMARY
A. Section Includes:
1. Surface applied corner guards.
2. Wall guards.
3. Owner furnished refrigerated case protection.
B. Products Installed But Not Furnished Under This Section:
1. Under provisions of Section 01640, Wal-Mart will furnish the following for installation by Contractor.
a. Refrigerated Case Protection.
C. Related Sections:
1. Section 01640 – Owner Furnished Products. Provisions for products supplied by the Owner.
2. Section 09310 – Ceramic Tile: Integrally installed stainless steel corner trim associated with ceramic wall
tile.
1.2 DELIVERY, STORAGE AND HANDLING
A. Section 01600 - Product Requirements: Transport, handle, store, and protect Products.
B. Product Delivery: Wal-Mart Supplier will make delivery of products to jobsite ready for installation. Contractor
shall contact to establish a product delivery and installation date and establish a coordination procedure.
C. Product Packaging: Products will be shipped in manufacturer's standard packaging with identification markings
on each component or package.
D. Acceptance at Site: Receive products as specified in Section 01640.
1. Verify quantity of products furnished with Bills of Lading provided with products.
2. Report discrepancies in product quantity delivered, or damage to products delivered to Wal-Mart
immediately. Upon notification, Wal-Mart will arrange for delivery of replacement products. Note
description of product quality discrepancies and/or product damage on Bill of Lading.
E. Manufacturing Defects: Report suspected product manufacturing defects to Wal-Mart Construction Manager and
Owner's Supplier. Upon notification, Wal-Mart will arrange for repair or replacement of product with manufactur-
ing defects.
PART 2 - PRODUCTS
2.1 MANUFACTURER
A. Unless specified otherwise, provide guards by one of the following manufacturers as specified:
1. American Floor Products Co., Inc., (800) 342-0424.
2. InPro Corporation, Muskego, WI (262) 679-9010.
3. IPC Door and Wall Protection Systems, (800) 222-5556.
4. McCue Corporation, Salem, MA, Attn: Rich Whelan, (800) 800-8503 or (978) 741-8500 x268.
5. Parkland Plastics Incorporated, Middlebury, IN (574) 825-4336.
6. Pawling Corporation (800) 431-3456, Contact: Jennifer Killmer.
7. Schluter Systems, Plattsburgh, NY (800) 472-4588.
2.2 CORNER GUARDS
Not For Construction 10260 - 2
2901 - Northampton, Massachusetts - 1452013 April 21, 2015
A. Aluminum:
1. Polaris (CG-2139) 90° Corner Guard, 18 gage, 2 x 2 inches x 48 inches, unless otherwise shown, by Amer-
ican Floor.
2. Aluminum Corner Guard, 0.08 inch thick, 2 x 2 inches x 48 inches, unless otherwise shown, by Pawling.
a. CG-401, for 90° corners.
b. CG-404, for 135° corners.
3. Factory pre-drilled for installation with countersunk screws.
B. Stainless Steel: 16 gage, 1-1/2 x 1-1/2 inches, unless otherwise shown.
1. ECK-K, by Schluter.
2. Lunar CG-2143, Style L-1, by American Floor.
3. CG-51, by Pawling.
4. S181124C-304, by InPro.
5. Adhesive (unless otherwise shown to install with stainless steel screws):
a. KURDI-fix, by Schluter.
b. ADH-50 Adhesive, by Pawling.
c. Equivalent by other manufacturer or as recommended by corner guard manufacturer.
2.3 WALL GUARDS
A. Plastic Wall Guards - also noted on drawings as 'WG' or 'bumper rail' - (Except Pharmacy): PVC bumper on PVC
mounting base, 2" high x 12 ft long x 1-3/4" projection, color black. Provide the following:
1. CartGuard E (CGT-175) bumper with base (CGB-175), including corners and end caps as required, by
McCue Corporation.
B. Pharmacy Wall Guards: Vinyl bumper on continuous aluminum retainer, 3” high x 12 ft long section x 1” projec-
tion, lightly pebbled or matte finish. Provide one of the following:
1. WG-3 Wall Guard, by Pawling.
a. Gray: No 210 Silver Gray.
2. 500 Wall Guard by IPC.
a. Gray: No. 0105 Silver.
C. Accessories: End caps, outside corners, brackets, and fasteners, as recommended by wall guard manufacturer.
2.4 REFRIGERATED CASE PROTECTION (WAL-MART FURNISHED/CONTRACTOR INSTALLED)
A. Case Corner Protection: Impact resistant polyethylene, with stainless steel legs and strike plate.
1. CartStop CG, 33” high, unless shown otherwise, by McCue.
a. Color: 401 Black.
b. Corner guards will be furnished with metal flanges and plastic anchors.
B. Refrigerated Case Floor Mounted Railing:
1. CartStop RE2, with CSR 4x4A corner assemblies, by McCue.
a. Color: 401 Black.
b. Railings and corner assemblies will be furnished with metal flanges and plastic anchors.
PART 3 - EXECUTION
3.1 EXAMINATION
A. Examine substrates and wall areas, with installer present, for compliance with requirements for installation toler-
ances and other conditions affecting performance of Work.
1. Examine walls to which wall guards will be attached for blocking, grounds, and other solid backing in-
stalled in the locations required for secure attachment of support fasteners.
2. Proceed with installation only after unsatisfactory conditions have been corrected.
3.2 PREPARATION
Not For Construction 10260 - 3
2901 - Northampton, Massachusetts - 1452013 April 21, 2015
A. Before installation, clean substrate to remove dust, debris, and loose particles.
3.3 INSTALLATION
A. Install in accordance with manufacturer's instructions, square and plumb, secured rigidly in position.
B. Position corner guard spaced above finished floor to allow for installation of wall base type specified or shown on
Drawings. Coordinate installation of wall finishes with corner guard installation.
C. Attach aluminum corner guards using stainless steel screws.
D. Attach stainless steel corner guards as shown on drawings.
E. Install refrigerated case protection with metal flanges and plastic anchors in accordance with manufacturer’s in-
structions.
3.4 SCHEDULE
A. Corner Guards:
1. Locate aluminum corner guards at outside corners of plastic laminate wainscot and plastic laminate case-
work, and in sales areas accessible by public at other locations shown on the drawings, unless otherwise in-
dicated or specified to receive other type of corner guards.
2. Locate stainless steel corner guards as shown on drawings.
B. Wall Guards: Locate wall guards where shown on the drawings.
C. Refrigerated Case Protection: Locate where shown on the drawings.
END OF SECTION
Not For Construction 10260 - 4
2901 - Northampton, Massachusetts - 1452013 April 21, 2015