09655 - 2901Not For Construction 09655 - 1
2901 - Northampton, Massachusetts - 1452013 April 21, 2015
UniSpec II - Store Planning 102513
SECTION 09655 - RESILIENT BASE AND ACCESSORIES
PART 1 - GENERAL
1.1 SUMMARY
A. Section Includes:
1. Resilient Base (B), furnished by Owner for installation by Contractor.
2. Plastic base (B), furnished by Owner for installation by Contractor.
3. Sanitary Cove Base (SCB), furnished by Owner for installation by Contractor.
4. Duratuff Base (DB), furnished by Owner for installation by Contractor.
B. Related Requirements:
1. Section 01640 - Owner Furnished Products: General procedures related to Owner furnished products.
2. Section 07900 – Joint Sealers: Sealant between bases and floor or wall surfaces.
1.2 REFERENCES
A. The publications listed below form a part of this specification to the extent referenced. Publications are referenced
within the text by the basic designation only.
B. ASTM International (ASTM):
1. ASTM E84 - Surface Burning Characteristics Of Building Materials.
1.3 QUALITY ASSURANCE
A. Regulatory Requirements: Conform to applicable code for flame/fuel/smoke rating requirements in accordance
with ASTM E84.
1.4 DELIVERY, STORAGE AND HANDLING
A. Transport, handle, store, and protect products in compliance with the requirements of Section 01600.
B. Receive Owner Furnished products in accordance with the requirements of Section 01640.
C. Product Delivery: Owner’s Supplier will deliver Owner furnished products to site to be received by Contractor.
Contact Owner’s Supplier to coordinate product delivery and installation.
D. Acceptance at Site: Inspect Owner furnished products upon delivery to Site to verify quantity, and report discrep-
ancies in quantity delivered or damage.
E. Product Packaging: Owner furnished products will be delivered in manufacturer's original packaging with identi-
fication markings on each component or package.
PART 2 - PRODUCTS
2.1 OWNER FURNISHED PRODUCTS
A. Owner’s Supplier will furnish the following as specified herein under provisions of Section 01640 for installation
by Contractor.
1. Bases.
2. Base accessories.
3. Base installation accessories: Adhesive/sealant and drill bits.
4. Building tape.
Not For Construction 09655 - 2
2901 - Northampton, Massachusetts - 1452013 April 21, 2015
B. Owner’s Supplier: Haines, Jones & Cadbury, Inc., Contact: Customer Service, (800) 459-7099, fax (479) 756-
8998, Email: WMT@hjcinc.com.
C. Descriptions and related provisions of products by Owner’s Supplier as specified herein are included as require-
ments for Supplier of products to be furnished by Owner and are included as information only to Contractor.
2.2 MATERIALS
A. Resilient Base: FS SS-W-40; vinyl or rubber, 4 inch high cove base, 1/8 inch thickness; with matching end stops
and preformed corner units; verify color prior to ordering.
1. B-4 Black Color: (For Snack Bar, Stockroom Areas, Garden Center Areas, Sales Areas - verify):
a. Armstrong Vinyl: No. 14100 Standard Black.
b. Flexco Rubber: No. WF-01 Black Dahlia.
c. Kencove Vinyl: No. KC-1 Black.
d. Johnsonite Vinyl: No. CB-40 Black.
e. Roppe Rubber: No. 00 Black.
2. B-1 Blue/Grey: (For use in older stores; verify use with WalMart Construction Manager).
a. Roppe Vinyl: No. 877 Steel Blue.
b. Roppe Rubber: No. 75 Slate.
c. Johnsonite Vinyl: No. CB-48 Grey.
d. Johnsonite Rubber: No. DC-28 Grey.
e. Flexco Rubber: No. 14 Medium Grey.
f. Kencove vinyl: No. KC213 Granite.
g. VPI Vinyl: No. 336 Silver Sable.
h. VPI Rubber: No. 736 Silver Sable.
3. Adhesive: GREENchoice Professional Cove Base Adhesive, by Franklin International, (800) 877-4583.
a. Water resistant type, VOC less than 50 g/l.
B. Plastic Base: Style B, Plas-tex Dura Base by Parkland Plastics Incorporated, Middlebury, IN (574) 825-4336 or
(800) 835-4110.
1. Model: Provide models specified below corresponding to mark number of base as shown on the drawings.
a. B6: Model No. PTX2131P.
b. B9: Model No. PTX2137P.
c. Size: As scheduled on Drawings.
2. Color: Black.
3. Fasteners: Black flathead countersunk screws, length sufficient to penetrate substrate and metal stud wall
framing.
C. Duratuff Plastic Base: Plas-Tex by Parkland Plastics, including ends, corners and accessories, by Parkland Plas-
tics, Inc., Middlebury, IN, (574) 825-4336 or (800) 835-4110. Distributed by Plunkett Distributing, Fort Smith,
AR; Contact Hollie Pierce, (800) 833-4393.
1. DB5 - Par-5-Blk-Base, 3/8" x 5" x 144".
2. DB10 - Par-Blk-Base, 3/8" x 10" x 144".
3. Color: Black.
4. Fasteners: Black flathead countersunk screws, length sufficient to penetrate substrate and metal stud wall
framing.
D. Sanitary Cove Base: As manufactured by Murphy Manufacturing, Denver, CO.
1. Material: Antimicrobial plastic, open core construction.
2. Grade: Standard.
3. Size: as shown.
4. Edge: As shown.
5. Finish: Smooth.
6. Color: As applicable, as shown on Drawings.
a. SCB1 - Red. SCB1 sanitary cove base for quarry tile.
b. SCB2 - Grey. SCB2 sanitary cove base for quarry tile.
c. SCB4 - Red. SCB4 sanitary cove base for vct/epoxy/concrete.
Not For Construction 09655 - 3
2901 - Northampton, Massachusetts - 1452013 April 21, 2015
d. SCB5 - Grey. SCB5 sanitary cove base for vct/epoxy/concrete.
e. SCB6 – Tan (Mushroom). SCB6 sanitary cove base for quarry tile.
f. SCB7 – Tan (Mushroom). SCB7 sanitary cove base for vct/epoxy/concrete.
7. Base Accessories:
a. Special Shapes: Inside and outside corners, splicers, and end caps.
1) 90 degree Corners: Shop prefabricated heat welded corners.
2) 45- degree Corners: Shop prefabricated heat welded corners.
3) Other than 90 and 45 degree Corners: Field fabricated as shown on the drawings.
b. Button Caps.
c. Splicers.
8. Installation Accessories:
a. Forstner Bit: 1/2-inch diameter.
9. Button Covers: As provided by manufacturer.
10. Adhesive/Sealant: Water resistant type, VOC less than 50 g/L. One of the following products as selected
by Wal-Mart:
a. Seal Bond 96 (SB96) by Michigan Adhesive Mfg., Inc. Color: Gray, red or tan to match base.
b. Greenchoice Titebond Weathermaster by Franklin International. Color to match base as follows:
1) Grey: Color No. 44741
2) Red: Color No. 44231
3) Tan: Color No.46381
11. Fasteners (Furnished by Contractor): As indicated by the manufacturer’s written instructions and as shown
on Drawings.
PART 3 - EXECUTION
3.1 INSTALLATION
A. Resilient Base:
1. Install base in accordance with manufacturer’s requirements using manufacturer’s approved adhesive.
2. Fit joints tight and vertical. Maintain minimum measurement of 18 inches between joints. Use premolded
corner units.
3. Install base on solid backing. Bond tight to wall and floor surfaces.
4. Scribe to fit door frames and other interruptions.
5. Remove excess adhesive from floor, wall surfaces and base.
B. Plastic Base (including Duratuff Plastic Base):
1. Fit joints tight and vertical. Maintain minimum measurement of 18 inches between joints
2. Install base on solid backing. Bond tight to wall and floor surfaces.
3. Scribe to fit door frames and other interruptions.
4. Miter and adhesively bond plastic base joints together.
5. Pre-drill plastic base and trim for attachment screws. Unless otherwise shown, attach plastic base at 24
inches on center into metal stud wall framing.
C. Sanitary Cove Base:
1. Install base in accordance with manufacturer’s written instructions and as shown on the Drawings.
3.2 CLEANING
A. Remove excess adhesive from floor, base, and wall surfaces without damage.
END OF SECTION
Not For Construction 09655 - 4
2901 - Northampton, Massachusetts - 1452013 April 21, 2015