08710 - 2901Not For Construction
08710 - 1
2901 - Northampton, Massachusetts - 1452013 April 21, 2015
UniSpec II-Store Planning 062714
SECTION 08710 - DOOR HARDWARE
PART 1 GENERAL
1.1 SUMMARY
A. Section Includes:
1. Hardware for doors.
2. Thresholds.
3. Weatherstripping, seals and door gaskets.
B. Related Sections:
1. Section 03310 - Cast-In-Place Structural Concrete: Non-shrink grout for thresholds.
2. Section 06100 - Rough Carpentry: Blocking for miscellaneous hardware mounting.
3. Section 06400 - Architectural Woodwork: Hardware for cabinetry and other finish carpentry.
4. Section 08110 - Steel Doors and Frames: Hardware coordination.
5. Section 16100 - Wiring Methods: Electrified hardware coordination.
1.2 REFERENCES
A. The publications listed below form a part of this specification to the extent referenced. Publications are referenced
within the text by the basic designation only.
B. Americans with Disabilities Act (ADA):
1. 28 CFR Part 36 – ADA Standards for Accessible Design.
C. American National Standards Institute (ANSI):
1. ANSI A117.1 - Specifications for Making Buildings and Facilities Accessible to and Usable by Physically
Handicapped People.
2. ANSI A 156.2 - Bored and Preassembled Locks and Latches.
3. ANSI A 156.6 - Architectural Door Trim.
4. ANSI A 156.13 - Mortise Locks and Latches.
5. ANSI A 156.15 - Release Devices – Closer Holder, Electromagnetic and Electromechanical.
D. National Fire Protection Institute (NFiPA):
1. NFPA 80 - Fire Doors and Windows.
2. NFPA 101 - Code for Safety to Life from Fire in Buildings and Structures.
3. NFPA 252 - Fire Tests of Door Assemblies.
E. Underwriters Laboratories (UL):
1. UL 10B - Fire Tests of Door Assemblies.
2. UL 305 - Panic Hardware.
1.3 DELIVERY, STORAGE AND HANDLING
A. Transport, handle, store, and protect door hardware products in compliance with the requirements of Section
01600 and manufacturer’s recommendations.
B. Store products in unopened packages in protected dry area to prevent damage from environmental and
construction operations.
Not For Construction
08710 - 2
2901 - Northampton, Massachusetts - 1452013 April 21, 2015
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Provide hardware as Scheduled in the Hardware Schedule in Part 3 of this Section.
B. Suppliers: Provide hardware by one of the following suppliers:
1. D.H. Pace Inc
Springfield, MO
Mark Lyons
(417) 831-5585
2. Alarm Exit: Contact manufacturer for Contractor-furnished alarm exit device.
a. Positive Lock - Contact: Kimbra White, (800) 342-7670.
C. Product Designations: Hardware may be any of the products listed within the tables below for each specific type.
Substitutions will not be permitted.
D. Hardware Manufacturer Designations:
ID Manufacturer Telephone
Ar Arrow (ASSA ABLOY) (800) 233-0478
De Detex Corporation (800) 729-3839
GJ Glynn-Johnson (Ingersoll Rand
Security Technologies (IR)
(800) 525-0336
H Hager Companies (800) 325-9995
I H. B. Ives (IR) (877) 613-8766
LCN LCN Closers (IR) (800) 526-2400
Mc McKinney (ASSA ABLOY) (717) 346-7551
Na National Guard Products, Inc. (800) 647-7874
P Pemko Mfg. Co. (805) 642-2600
ID Manufacturer Telephone
Po Positive Lock (800) 342-7670
Re Reese Enterprises, Inc. (800) 328-0953
Ri Rixson (ASSA ABLOY) (800) 457-5670
Ro Rockwood (ASSA ABLOY) (814) 926-2026
Sc Schlage (IR Security & Safety) (800) 847-1864
Sec Securitron (ASSA ABLOY)
Sel Select Hinges (800) 423-1174
S Stanley Hardware (800) 622-4393
T Trimco (Triangle Brass Mfg.) (213) 262-4191
VD Von Duprin (IR) (800) 999-0408
2.2 REGULATORY REQUIREMENTS
A. Perform work in accordance with the following standards:
1. ANSI A117.1
2. NFPA 101.
3. NFPA 80.
4. NFPA 252.
5. UL 10B.
6. UL 305.
B. Conform to applicable code for requirements applicable to fire rated doors and frames.
C. Products Requiring Electrical Connection: Listed and classified by Underwirters Laboratories, Inc. (UL), and
acceptable to Authority Having Jurisdiction as suitable for the purpose specified and indicated.
D. Conform to applicable local, State or Federal disabled access requirements for the installation and operation of
door hardware.
2.3 FINISHES
A. Provide finishes as specified in Part 2 of this Section unless otherwise indicated in the Hardware Schedule for the
specific hardware item.
Not For Construction
08710 - 3
2901 - Northampton, Massachusetts - 1452013 April 21, 2015
2.4 HINGES
A. Material:
1. Mortise Butts: Provide full mortise-type hinges with stainless steel pins, except steel pins with steel hinges;
non-removable pin (NRP) for exterior and public interior exposure, non-rising pin, flat button with matching
plugs, 4-1/2 inches x 4-1/2 inches unless otherwise shown.
2. Ball-bearing Type Hinges: Swaged, inner leaf beveled, square corners.
3. Full-surface Reinforcing Pivot:
a. For 4-1/2 inch butts with standard 1/4-inch backset.
b. Install per manufacturer's written instructions using attachments furnished with pivot.
4. Continuous Geared Hinge: Full surface type hinge of 6063 T6 Aluminum with thermoplastic polyester
bearings, 90 min. fire rated, clear finish. Provide self drilling threaded fasteners for frame and thru bolts for
door.
B. Hinges by types:
Type Description Finish MANUFACTURER/MODEL
Stanley Hager McKinney
H-2 Butts: Medium weight door, low frequency, steel 652 F179 1279 T2714
H-4 Butts: Medium weight door, average frequency, steel 652 FBB179 BB1279 TB2714
Select Hinge Hager
H-7 Hinge: Continuous geared hinge CL SL21 SD x
SDTF x
FDH
Roton 780-210
Stanley Hager McKinney
H-8 Hinge: Surface mounted 3 x 3 US2H 808BP 1808 705
H-9 Butts: Heavy weight, stainless steel 630 FBB199 BB1199 T4B3386
H-11 Butts: Medium weight, stainless steel 630 FBB191 BB1191 TB3386
H-15 Pivot: Full-Surface Reinforcing (Helper Hinge) 253 (right or
left handed
as
applicable)
2.5 LOCKS, LATCHES, AND BOLTS
A. Materials:
1. Cylindrical Locks: ANSI A156.2, Series 4000 Grade 1, equipped with 6-pin tumbler; "keyed alike" to match
keying system of existing locks to remain if compatible. Provide 2-3/4 inch backset. Provide two keys for
each lock.
2. Mortise Locks: ANSI A156.13, Grade 1, equipped with 6-pin tumbler; "keyed alike" to match keying system
of existing locks to remain. Provide 2-3/4 inch backset. Provide two keys for each lock.
3. Provide Schlage standard C123 keyway (except at Pharmacy).
4. Provide Schlage Primus XP cylinders for Pharmacy 300 series locks.
5. Master key, key alike or different as directed.
6. Quantity: In addition to two keys for each lock, provide the following:
a. Cylinder Change Keys: 6 change keys per change
b. Master Keys: 10.
7. Latch Sets: Provide push-button releases by turning lever, closing door, or turning emergency release key
through hole in outside lever.
8. Strikes: ANSI Strikes, 1-1/4 inches x 4-7/8 inches, with curved lip. Wrought box strikes, with extended lip
for latch bolts, except open strike plates may be used in wood frames. Provide dustproof strikes for foot
bolts.
9. Tactile Warning: Provide locks with tactile warning for handicapped codes when required by local
jurisdiction having authority.
Not For Construction
08710 - 4
2901 - Northampton, Massachusetts - 1452013 April 21, 2015
B. Locks by types:
Type Description Finish MANUFACTURER/MODEL
Schlage
L-1 Mortise Cylinder 626 20-001
L-2 Mortise Cylinder 626 20-001-1-1/4 inches
L-3 Rim Cylinder 626 20-022
L-4 Classroom Lock 626 ND70PD Rhodes
L-5 Storeroom Lock (F86) 626 ND80PD-Rhodes- 25
L-6 Office Lock (F82) 626 ND50PD-Rhodes-10-025
L-7 Passage Latch (F75) 626 ND10S - Rhodes- 10-025
L-8 Privacy Lock (F76) 626 ND40S - Rhodes- 10-025
L-9 Dead Bolt Lock 626 B661P
L-10 Access Control Lock 626 CO-100-CY-70-KP-RHO-626PD
L-11 Entrance Lock (F81/82) 626 ND53PD– Rhodes 10– 25
L-12 Storeroom Lock with
deadbolt
626 L9480-06L
L-13 Institutional Lock (F87) 626 ND82PD-Rhodes 10- 025
L-15 Entrance Lock with deadbolt 626 L9453-06L
L-16 Dead Bolt Lock with
Thumbturn (Classroom
Function)
626 B663P
L-17 Storeroom Lock (Grade 2) 626 AL80PD-Saturn
L-18 Privacy Lock (Grade 2) 626 AL40S-Saturn
L-20 Office Lock
(Grade 2)
626 AL50PD-Saturn
L-21 Passage Lock (Grade 2) 626 AL10S-Saturn
L-22
Thumbturn Cylinder 626 09-905NHxB502-292
L-23 Dead Bolt Lock 626 B660P
L-24 Entrance/Office Lock (F82) 626 ND91PD-Rhodes 10-025
2.6 EXIT DEVICES
A. Materials:
1. Provide exposed metal to match hardware.
2. Size and mount units indicated or, if not indicated, to comply with manufacturer's recommendations for
exposure condition. Reinforce substrate as recommended.
B. Exit Devices by types:
Type Description Finish MANUFACTURER/MODEL
Von Duprin, unless otherwise noted.
E-1 Exit Device: Rim, exit only, UL listed. 626 99EO-F
E-2 Exit Device: Rim, exit only, with alarm. Provide exterior
access model or time delay, or weatherproof when
scheduled.
600 Positive Lock:
THPA Series (Size as required for door
scheduled)
O/A – Outside Access
TDL – Time Delay
WE - Weatherproof
E-3 Exit Device: Surface vertical rod (top rod only), lever trim,
blank escutcheon, UL listed.
626 9927L-F-BE-LBR
E-4 Exit Device: Concealed vertical rod, lever trim, blank
escutcheon, UL listed
626 9948L-F-BE
E-5 Exit Device: Rim, lever trim, blank escutcheon, UL listed. 626 99L-F-BE
E-7 Exit Device: Rim, pull trim. 626 99NL x 697NL
Not For Construction
08710 - 5
2901 - Northampton, Massachusetts - 1452013 April 21, 2015
E-8 Exit Device: Mortise delay exit device, pull trim, with alarm.
Power Transfer #EPT-10
Power Supply #PS 914
626
SP28
CX9975L x
992L
(06 Lever)
E-10 Exit Device: Rim, exit only 626 99EO
E-11 Exit Device: Rim, weatherproof, exit only, with alarm. 626 Detex:
V40 EB W AL RWE
E-14 Exit Device: Vertical Rod, exit only, with alarm. Provide
exterior access model or time delay when scheduled.
600 Positive Lock:
THPA Series
O/A – Outside Access
TDL – Time Delay
E-16 Exit Device: Rim, lever trim, 626 99L-992L-NL
E-18 Exit Device: Rim, lever trim, UL Listed 626 99L-F-992L-NL
E-19
Exit Device: Surface vertical rod, no outside trim, exit only,
UL listed.
626 9927EO-F
E-20 Exit Device: Rim, lever trim, blank escutcheon 626 99L-BE
E-21 Exit Device 626 99EO
E-23 Exit Device: Rim, lever trim, with alarm
Power Transfer #EPT-10
Power Supply #PS-914
626
SP28
CX99NL-F x 696-NL
E-24 Exit Device: Rim, lever trim, with alarm
Power Transfer #EPT-10
Power Supply #PS-914
626
SP28
CX99EO-F
2.7 PULLS AND PUSHES
A. Materials: ANSI A156.6 for 0.050 inch thickness.
B. Push and Pulls by types:
Type Description Finish MANUFACTURER/MODEL
Ives Trimco Rockwood
P-1 Push 3-1/2 inches x 15 inches 630 8200 1001-2 70B
P-2 Pull 3-1/2 inches x 15 inches 630 8311-5 1012-2 137x70B
P-3 Pull 8 inches CTC x 3/4 inch dia 626 8103-8 1194-2 107
P-4 Pull 5-1/4 cc 630 8111-5 1102T 132
P-5 Pocket Door Pull Latching black 1069L
2.8 CLOSERS
A. Materials & Features:
1. ANSI A156.4, grade 1.
2. ADA/ANSI A117.1
3. UL listed.
4. Non-handed, non-sized; adjustable 1-6.
5. 180 degree door opening.
6. Standard cover.
7. Multiple backcheck location valve.
8. Extreme temperature fluid.
9. Sex nuts and bolts (SNBs).
10. Provide exposed metal to match hardware.
11. Size and mount units indicated or, if not indicated, to comply with manufacturer's recommendations for
exposure condition. Reinforce substrate as recommended.
B. Closers by types:
Not For Construction
08710 - 6
2901 - Northampton, Massachusetts - 1452013 April 21, 2015
Type Description Finish MANUFACTURER/MODEL
LCN
C-4 Closer: Regular Arm 689 4011-REG
C-5 Closer: Parallel Arm 689 4111-EDA
C-6 Closer: Regular Arm 689 4031-REG
C-7 Closer: Parallel Arm 689 4031-EDA
C-8 Closer: Parallel Arm, HO 689 4111-HEDA
C-9 Closer: Parallel Arm, HO, positive
stop
689 4111-H-CUSH
C-10 Closer: Regular Arm, HO 689 4031-H
C-11 Closer: Parallel Arm, positive stop 689 4031-CUSH
C-12 Closer: Parallel Arm, Positive Stop 689 4111-CUSH
2.9 DOOR PROTECTION PLATES
A. Materials: J100 Protection Plates conforming to ANSI 156.6, stainless steel, 0.050 inch (1.2 mm) minimum
thickness. Mount centered, flush with bottom of door. Screws: Phillips head sheet metal screws plated to match
plate.
B. Protection Plates by types:
Type Description Size Finish MANUFACTURER/MODEL
Ives Trimco Rockwood
K-2 Kick Plate 10 inch x (DW-2 inch) 630 8400 K1050 J102
K-3 Armor Plate 34 inch x (DW-2 inch) 630 8400 K1050 J101
K-4 Armor Plate 41 inch x (DW-2 inch)
Notch for lockset
630 8400 K1050 J101
K-5 Kick Plate 18 inch x (DW-2 inch) 630 8400 K1050 J102
K-6 Armor Plate (UL Rated) 34 inch x (DW-2 inch) 630 8402UL KA050-2 Fire Rated K1050F
K-7 Armor Plate (UL Rated) 36 inch x (DW-2 inch) 630 8402UL KA050-2 Fire Rated K1050F
2.10 STOPS, HOLDERS AND BUMPERS
A. Materials:
1. Door stop mounting: Methods to suit substrates encountered (plastic anchor, drywall anchor, expansion
shield).
2. Provide gray rubber exposed resilient parts.
3. Do not furnish aluminum floor stops.
4. For most doors, the preferred door stop is Wall Stop type S-1 and is specified as such in the hardware
schedule. However, if circumstances prevent a wall stop installation (door too far from perpendicular wall,
door swing into adjacent glass, etc.) then substitute a type S-3 or S-4 floor stop as indicated for use intended.
5. Adjust height of floor stops to suit undercut of adjacent door.
B. Stops, Holders and Bumpers by types:
Type Description Finish MANUFACTURER/MODEL
Ives Trimco Rockwood
S-1 Wall Stop 630 WS407CVX W1276CS 409
S-2 Stop & Holder 626 WS445 1207 477
S-4 Floor Stop 626 FS438 1212 3/4ES 442
Rixson Glynn-
Johnson
S-5 Overhead Stop - 3-0 doors 626 9-336 904S
S-6 Overhead Stop - 2-6 doors 626 9-236 902S
Ives Trimco Rockwood
S-7 Stop & Holder. Kickdown type. Alum or
satin chrome
FS452-4 1221-4FF 458
Not For Construction
08710 - 7
2901 - Northampton, Massachusetts - 1452013 April 21, 2015
Type Description Finish MANUFACTURER/MODEL
Ives Trimco Rockwood
Rixson Glynn-
Johnson
S-8 Overhead Stop. Medium duty 630 10-336 454S
2.11 ELECTROMAGNETIC DOOR HOLDERS
A. Materials & Features:
1. ANSI A156.15, Grade 1.
2. UL listed.
3. Magnet protected against transients and surges up to 600 volts.
4. 24V DC
5. Holding force 35 lbs., nominal.
6. Low residual magnetism for easy release of door.
7. Electrical values +10% -15%.
8. Provide exposed metal to match hardware.
B. Electromagnetic Door Holders by types:
Type Description Finish MANUFACTURER/MODEL
LCN Rixon
DH-1 Door Holder As Scheduled SEM 7850 689 FM-998 SA
2.12 THRESHOLDS
A. Thresholds by types:
Type Description MANUFACTURER/MODEL
National
Guard
Pemko Reese
T-1 Threshold: 5 inches x 1/2 inch, abrasive. 425HD-SIA
5”
1715AK
5”
T-4 Threshold: 2 inches x 1/8 inch, stainless steel plate, smooth surface,
beveled 1 side only. Transition threshold between concrete slab and
vinyl tile.
Set threshold in full bed of silicone sealant, butted to adjacent vinyl
tile. Anchor into concrete slab with Hilti Kwik-Con II, #14-134 TFH
fasteners spaced at 6-inch centers using Matched Tolerance drill bit for
dense concrete.
BAR6SS-2-
10 bevel
T-9 Threshold: 5 inches, aluminum, stop seal 896S 2005AT S483AS
T-10 Threshold: 5 inches, aluminum, stop seal 898V 2006AT
2.13 WEATHERSTRIPPING
A. Weatherstripping by types:
Type Description MANUFACTURER/MODEL
National
Guard
Pemko Reese
W-1 Jamb & Head Weatherstripping, aluminum, vinyl insert, screw-on type 155V 303AV 807A
W-3 Door Bottom Sweep, surface mounted sweep, anodized aluminum,
neoprene seal.
201NA 315CN 323A
W-4 Meeting Stile Gaskets, aluminum, silicone insert seal. 160S 303AS 807A
W-5 Jamb Door Gaskets, adhesive application, silicone seal. 5050B S88D 797B
W-6 Door Shoe Weatherstripping, for hollow metal doors with inverted
bottom channel, recessed thermo-plastic insert, slotted/adjustable.
35EN 222PK 596AF
Not For Construction
08710 - 8
2901 - Northampton, Massachusetts - 1452013 April 21, 2015
2.14 MISCELLANEOUS HARDWARE
A. Silencers: Provide in metal door frames, unless not permitted for fire rating, or unless bumper-type
weatherstripping is provided; three for each single door frame, two for double-door frame.
B. Miscellaneous Hardware by types:
Type Description Size Finish MANUFACTURER/MODEL
Stanley Ives Rockwood
M-1 Hasp & Staple 3-1/2 inches 602 SP915 WS1920
M-3 Surface Bolt 4 inches 626 40 630
M-4 Viewer 626 700 620
Ives Trimco Rockwood
M-5 Extension Flush Bolts (UL) 12 inches 626 458 3917 555
M-6 Automatic Flush Bolt 626 FB42 1948
Ives Trimco Rockwood
M-8 Silencers SR64 1229-A 608
National Guard Pemko Reese
M-9 Drip Cap 16AD 346CxFW R201A
Ives Trimco
M-10 Door Coordinator CORxMBxFL 3092xMBxW
Arrow Detex
M-11 Door Alarm with mortise
cylinder
626 130 Series AL EAX-500
M-12 Door Alarm with rim cylinder Gray Alarm: EAX-2500F
Transformer: PP5152-3
Rockwood
M-15 Latch Protector 630 321
Von Duprin Schlage Securitron
M-16 Electric Strike, grade 1, FSE (fail secure), 24
VDC unless noted otherwise in schedule
630 6211
M-17 Power Supply PS902
M-18 Push Button 660PB
M-19 Electric Strike 626 UNL-24
M-20 Power Supply BPS-24-1
M-21 Keypad & Controller DK-26SS
M-21a Keypad DK-26PSS
Von Duprin
M-24 Mullion 626 9954
M-25 Strike 626 499F
2.15 FABRICATION
A. Finish and Base Material Designations: Number indicates Builders Hardware Manufacturer’s Association
(BHMA) Code or nearest traditional U.S. commercial finish.
B. Where base material and quality of finish are not otherwise indicated, provide at least commercially recognized
quality.
C. Fasteners: Provide door hardware manufactured to comply with published templates prepared for machine, wood,
and sheet metal screws. Provide screws that comply with commercially recognized industry standards for
application intended, except aluminum fasteners are not permitted. Provide Phillips flat-head screws with finished
heads to match surface of door hardware, unless otherwise indicated.
1. Fire-Rated Applications:
a. Wood or Machine Screws: For the following:
1) Hinges mortised to doors or frames.
Not For Construction
08710 - 9
2901 - Northampton, Massachusetts - 1452013 April 21, 2015
2) Strike plates to frames.
3) Closers to doors and frames.
b. Steel Through Bolts: For the following unless door blocking is provided:
1) Surface hinges to doors.
2) Closers to doors and frames.
3) Surface-mounted exit devices.
2. Spacers or Sex Bolts: For through bolting of hollow-metal doors.
3. Gasketing Fasteners: Provide noncorrosive fasteners for exterior applications and elsewhere as indicated.
PART 3 EXECUTION
3.1 EXAMINATION
A. Verify that doors and frames are ready to receive Work and dimensions are as instructed by the manufacturer.
B. Verify that electric power is available to power operated devices and of the correct characteristics.
3.2 INSTALLATION
A. Hardware Mounting Heights: Door and Hardware Institute Recommended Locations for Builders Hardware for
Standard Steel Doors and Frames, except as otherwise indicated.
1. Conform to requirements of applicable local, State or Federal disabled access requirements for the
installation and operation of door hardware.
2. Install electromagnetic door holder at 24 inches above finish floor elevation at manufacturer’s recommended
distance from the door’s leading edge.
B. Install each hardware item to comply with manufacturer's instructions and recommendations, unless otherwise
specified.
C. Thru-bolt closers on doors.
D. Vestibule Thresholds: Install as shown on Drawings.
3.3 ADJUSTING
A. Hardware Adjustment: Adjust hardware for proper operation and function at construction completion. Instruct
Wal-Mart personnel in proper maintenance and adjustment.
3.4 HARDWARE SCHEDULE
A. Hardware Set numbers below correspond to the Door Schedule as shown on the drawings.
B. The Hardware Schedule below represents the full set of hardware for each door listed. Refer to the Door Schedule
and Schedule Notes for actual hardware components required for each door in this project.
C. Any hardware item specified in the Tables in Part 2 above which corresponds to the mark associated with the item
( E.g. “H-1, E-2, etc) as shown in the Hardware Schedule below may be provided.
D. For interior hollow metal doors and exterior building hollow metal doors which have a tactile exit sign installed on
the door, install a door closer (C-5) if a closer does not exist on the door.
Not For Construction
08710 - 10
2901 - Northampton, Massachusetts - 1452013 April 21, 2015
Door 100A - Sales: (HM, Pair, w/ Exit Device)
3 pr. (H-11) Butts
2 ea. (E-14) Alarm Exit Device
1 ea. (T-9) Threshold
1 pr. (W-4) Meeting Stile Gaskets
2 ea. (W-3) Door Bottom Weatherstrip
1 set (W-1) Jamb & Head Weatherstrip
1 ea. (M-9) Drip Cap
END OF SECTION