06200 - 2901Not For Construction
06200 - 1
2901 - Northampton, Massachusetts - 1452013 April 21, 2015
UniSpec II- Store Planning 072712
SECTION 06200 - FINISH CARPENTRY
PART 1 - GENERAL
1.1 SUMMARY
A. Section Includes:
1. Interior standing and running trim.
2. Shelving.
B. Related Sections:
1. Section 06100 - Rough Carpentry: Panel product used as finish material on walls, ceilings, wainscots, and
bases. Lumber and panel products used for wood and wire mesh doors.
2. Section 06400 - Architectural Woodwork: Plastic laminate casework and wainscoting.
3. Section 09900 - Paints and Coatings: Opaque and transparent finishes.
1.2 REFERENCES
A. The publications listed below form a part of this specification to the extent referenced. Publications are referenced
within the text by the basic designation only.
B. American Woodworking Institute (AWI):
1. AWI - Quality Standards.
C. American Plywood Association (APA):
1. APA - Grades & Specifications.
1.3 DELIVERY, STORAGE AND HANDLING
A. Section 01600 - Material and Equipment: Transport, handle, store, and protect products.
PART 2 - PRODUCTS
2.1 WOOD MATERIALS
A. Interior Standing and Running Trim : AWI Custom Grade; plain sawn, Grade II lumber.
1. Painted Finish: Closed-grain hardwood, any species
2. Clear Sealed Hardwood: One of the following hardwood species. Use one species throughout
a. Ash.
b. Birch.
c. Oak.
B. Shelving - Clear Sealer Finish: Fir or birch plywood with veneer core and sanded edges.
1. APA 5-ply A/C, 3/4 inch thickness at Stockroom shelving.
2. APA 5-ply A/B at other locations.
C. Panel Product for Finish Material on Walls, Ceilings, Wainscots, and Bases: See Section 06100.
2.2 HARDWARE
A. Fasteners: Size and type to suit application; galvanized for exterior and high humidity locations; plain finish at
other locations.
2.3 FABRICATION
Not For Construction
06200 - 2
2901 - Northampton, Massachusetts - 1452013 April 21, 2015
A. Fabricate to AWI Standards.
1. Standing and Running Trim: Custom Grade.
2. Wood Shelving with Clear Sealer: Economy Grade.
PART 3 - EXECUTION
3.1 INSTALLATION
A. Install woodwork plumb, level, and straight without distortion; use concealed shims. Scribe and cut woodwork to
fit adjoining work. Anchor woodwork items to nailers or blocking or directly to substrate using concealed
fasteners.
B. Standing and Running Trim: Install with minimum joints, using maximum lumber lengths possible. Cope at
returns; miter at corner.
C. Wood Shelving: Assemble units and install as indicated on Drawings.
D. Site Finishing: Refer to Section 09900.
END OF SECTION