Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
SunPower T10 Datasheet
The SunPowerTM T10 Solar Roof Tile is pre-engineered to tilt at a 10-degree angle and enhance energy capture. These non-penetrating roof tiles interlock for secure, rapid installation. Made of durable, lightweight materials, the patented design resists high winds and corrosion and is uniquely flexible to adapt to the size and requirements of virtually any flat rooftop and select ground sites. OPTIMISED ENERGY OUTPUT Higher energy delivery due to10 degree tilt and sunlight reflectors NON-PENETRATING Modular solar tiles are easy to install without mechanical roof attachments DEPLOYS RAPIDLY Large-scale solar arrays can be installed efficiently and commissioned quickly INTEGRATES SEAMLESSLY Low-profile design blends into flat roof and flat ground sites, while operating within existing electrical network NON-OBSTRUCTIVE Solar tiles will not interfere with roof operations or drainage HIGHLY WIND RESISTANT Engineered for aerodynamic stability means no roof attachments in typical wind zones sunpowercorp.com HIGHLIGHTS T10 SOLAR ROOF TILE TILTED FOR HIGHER ENERGY OUTPUT SUNPOWERTM T10SOLAR ROOF TILE Solar Panels* SunPower 96-cell SPR-327NE SunPower72-cellSPR-245NE SerengetiTM 60-cellSER-235P Peak Watts / m2 133.3 119.2 94.4 Average Array Weight (kg/m2)9.62 9.91 10.11 Wind Resistance (kph)193 *other panels may be available on request © 2011 SunPower Corporation. SUNPOWER, SERENGETI and the SUNPOWER logo are trademarks or registered trademarks of SunPower Corporation in the US and other countries as well. All Rights Reserved. Specifications included in this datasheet are subject to change without notice. sunpowercorp.com sunpowercorp.com.au Document# 001-62078 Rev*A / A4_EN Please read safety and installation instructions before using this product, visit sunpowercorp.com for more details. CS 11_286 T10 SOLAR ROOF TILE TILTED FOR HIGHER ENERGY OUTPUT MECHANICAL DATA Solar Panels SunPowerTM 72-or 96-cell monocrystalline panels SerengetiTM 60-cell polycrystalline panels Materials Wind deflectors: 24 gauge Galvalume coated steel Supports: 5052-H32 aluminium plate Fasteners: 300-series stainless steel Foot pads: EPDM rubber, molded on aluminium plate Total Weight Per System Tile With SunPower 96-cell panels: 23.35 kg With SunPower 72-cell panels: 20.15 kg With Serengeti 60-cell panels: 25.4 kg WARRANTIES AND CERTIFICATIONS Warranty 10-year limited product warranty 25-year limited power warranty Certifications TUV Rheinland, PV Mounting Systems according to TUV Spec. TZE/2.572.10 (TUVdotCOM ID 0000023038); Tested to UL 1703, Class C Fire Rating TESTED OPERATING CONDITIONS Temperature -40° C to +85° C Max load 3.2 kPa front (e.g. wind & snow) with SunPower 72-cell modules 2.4 kPa front (e.g. wind & snow) with SunPower 96-cell and Serengeti 60-cell modules Impact Resistance Hail 25 mm at 23 m/s DIMENSIONS mm (in)