MSDS Heatlok Soy 200 Foam (02-01-10)q I:~ DEMILEC '"~) u.c.
~ POLYURETHANE SYSTEMS MANUFACTURER
MATERIAL SAFETY DATA SHEET
DEMILEC SPRAY -APPLIED RIGID POLYURETHANE FOAM
HEA TLOK SOY 200
SECTION 1: PRODUCT & COMPANY INFORMATION
MANUFACTURER OF CHEMICAL
COMPONENTS
DEMILEC (USA) LLC
2925 Galleria Dr.
Arlington, TX 760 1 1
Phone: (8 17) 640-4900
Fax: (817) 633-2000
e-mail: info@scalcction500.colll
Emergenc)' teICI)honc:
1-877-DEMILEC or
CHEMTREC: (800) 424-9300
CANUTEC: (6 13) 996-6666
PRODUCT
Trade lIame: HEATLOK SOY 200
Demilee Rigid Pol)OIrethane Foam
Chemical name: Rigid Urethane Foam Plastic
Chemical family: Urctlwne
CAS #: 9009-54-5
TOG Classification
Non-regulated
WHMIS CLASSIFICATION:
Non-rel,'ulaled
SECTION 2: INGREDillNTS
INGREDIENTS
Urethalle Plaslics
1,1,1,3,3-PcntaOuoropropanc
Physical State:
Color:
Odor:
Density:
Melting Point:
Decomposition Temperature:
Max. Service Temperature:
Solnbility in water:
% # CAS OSHA PEL
(TWA) -Sill'
90 -100 9009-54-5 Not Listed
1-5 460-73-1 Not Listed
SECTION 3: PHYSICAL PROPERTillS
Rigid Cellular Plastic
Green
Neutral
1.8 -2.2 pcf
NI A, Thermoset
>250°F
180°F
No ne
WEEL(AIHA)
(TWA)-Sbr
Not Listed
300pI'm
SECTION 4: FIRE AND EXPLOSION HAZARD DATA
State:
Flash Ignition Temperature:
Combuslible
824°F (440°C) by ASTM D 1929
ivlSDS HEATLOK SOY 200 Foam
Pag.: 1/3
Spontaneous Ignition Teml)Craturc: IO04°F (540°C) by ASTM D 1929
Extinguishing Media:
Fire-Fighting E(luipllIent:
Hal'Zadous Decomposition
Products:
Use water, my chemical, carbon dioxide or chemical foam.
Because fire may produce toxic thenual decomposition products,
wear a self-contained breathing apparatus with a positive pressure.
Under fire conditions, carbon monoxidc, carbon dioxide, hydrogen
halides and phosphorous oxide, possible traces of hydrogen cyanide
and nitrogen oxides.
Rigid Pol)'Jrethane foam like other organic matcrials such as paper, wood and cotton, can present unreasonable fire
risks in certain misapplication whcn exposed to ignition sources in air. Once ignited, fires can bum rapidly and
produce rapid flmllespread, quick flashover, toxic or flammable gases, dense smoke mld intense heat. In no event
should the polyurethane foam remain exposed or unprotected.
Precautions:
1) Make no application of foam to interior waH and ceilings or other space enclosures without prompt and
subsequent application of approved thennal barriers.
2) Do no welding or flame cutting until proper surface protection has been provided.
3) Avoid the confined storage oflarge urethane foam buns.
Stability:
Incompatibility:
Hazardous decomposition:
Polymerization:
Corrosive 1)l'Operties:
Oxidizer pro]lerties:
Chemical resistance:
Routes of entry for solids:
Routes of entry for gases:
SECTION 5: REACTIVITY DATA
Stable under normal conditions
None known
Under fire conditions; carbon monoxide and dioxide, hydrogen halides
phosphorous oxide and possible traces of hydrogen cyanide and nitrogen oxidcs.
None
None
None
Stable in the presence of most solvents found in binders, bituminous materials,
wood preservatives and sealers.
-Resistant to facers containing plasticizer, fuel, mineral oil, weak acids and weak
bases.
-Resistant to fungi and microbes.
-UV rays cause a darkening of the foam surface and with timc an
embrittlement of the surface.
SECTION 6: HEALTH HAZARD DATA
Inhalation, skin contact, only if dust is created during cutting.
N/A
Eye and sldn contact with dust: May cause mechanical irritation to skin and eyes.
May cause mechmlical irritation to respiratory system.
May cause choking, if swallowed.
Dust inhalation!
Dust ingestion:
Eye dust contact:
Skin dust contact:
Dust Inhalation:
Ingestion:
E)'e protection:
SECTION 7: FIRST AID MEASURES
Irrigate \vith water for 15 minutes.
Wash with soap and water thoroughly.
Remove to fresh air if effects occur. If not breathing, give artificial respiration.
If breathing is difficult, assist with oxygen. Consult physician.
No adverse effects anticipated by this routc.
SECTION 8: HANDLING PRECAUTIONS
Safety glasses during cutting
i\IS])S HEATLOK SOY 200 Foam
Page 2/3
Skin protection:
Respiration protection:
Ventilation:
Waste disposal:
General:
Storage requirements:
Protective clothing not necessary
Dust mask during cutting
Use sufficieut ventilation to keep exposure to dust to minimum (below 5-mglm3
respirable dust).
SECTION 9: DISPOSAL CONSIDERATIONS
In accordance with Federal, Proviucial and Local regulations.
SECTION 10: STORAGE INFORMATION
Keep away from open flame, e!ccllical or mechanical sparks, electric heaters,
high powered lights, flamc sources and flammable liquids and gases.
Protect all indoor bun and sheet storagc areas with fusible sprinklers.
SECTION 11: TRANSPORTATION INFORMATION
Propel' shipping name:
Primar)' hazanl class:
Secondary hazard class:
Label required:
Placard required:
Poison constituent:
UN Code:
EPA Registration #:
TDG Classification:
Prepared b)':
Approved by:
Prellared:
Current issue datc:
Spray-applied rigid polyurethane foam HEATLOK SOY 200
N/A
N/A
None
None
N/A
N/A
N/A
Non-regulated
SECTION 12: APPROVALS
Julija Simmovic, Polyurethane Chemist
Dave LaB, General Manager
Febmary, 2010
Febmary, 2010
l\ISDS HEATLOK SOY 200 Foam
Page 3/3