HEATLOK SOY 200 Technical Data Sheet 5-4-10HEATLOK SOY® 200 Technical Data Sheet
Rev.5/4/2010
Page 1 of 2
DEMILEC (USA) LLC® • 2925 Galleria Drive • Arlington, TX 76011
(817) 640-4900 phone • 1.877.DEMILEC (336-4532) toll-free • (817) 633-2100 fax
www.DemilecUSA.com • Info@DemilecUSA.com
Rigid, Spray-applied Polyurethane Foam Insulation
Zero Ozone Depletion Substance, Class I ASTM
HEATLOK SOY® 200 is two component spray applied rigid polyurethane foam, green in color, having a nominal density 2lbs/ft³. This
spray foam has been specially formulated to meet the intent of the International Code Council (ICC) building codes and is used
primarily as a moisture/vapor barrier, air barrier and thermal insulation on above and below grade interior and exterior applications.
Complies with FEMA requirements as a Class 4 insulation.
HEATLOK SOY® 200 is environmentally-friendly foam developed from recycled plastic materials and renewable soy oils, while the
blowing agent is the HFC 245fa. Certified Insulation Material approved by California Department of Consumer Affairs. GREENGUARD
and GREENGUARD Children and Schools certified. Meets LEED requirements in various categories.
Physical Properties
Method Description Imperial units Metric units
ASTM D 1622 Density (core) 2.1 lb/ft3 34 Kg/m³
ASTM C 518
(R-Value)
Initial Thermal Resistance, 1”
Aged Thermal Resistance, 180 days @ 23ºC, 1”
7.3 ft2hºF/BTU
TBD In testing
1.29 m²ºC/W
TBD In testing
ASTM D 1621 Compressive Strength (10%) 20.6 psi 142 kPa
ASTM D 1623 Tensile Strength 45.4 psi 313 kPa
ASTM D 2126 Dimensional Stability @ 158ºF (70ºC), 97% R.H.
(168 hrs) (sample without any substrate)
Length / Width / Thickness
% Change
+4.9/+5.6/+7.7
ASTM D 2842 Water Absorption (Serves as moisture barrier) 0.3% Volume
ASTM E 96 Water Vapor Permeance, 1.5” (Note: Is a vapor barrier per
IBC Section 202, Definitions) 0.16 perms 9.1 ng/Pasm²
ASTM E 283-04
Air Permeance @ 75Pa @ 1” (Note: Air Barrier Association of
America approved air barrier)
0.004L/sm²
ASTM E2178-03 Air Permeance @ 75Pa @ 1” 0.001L/sm²
ASTM E 84-05 Surface Burning Characteristics @ 4”thick
• Flame spread index
• Smoke development
Class I
20
450
VOC Content VOC Emissions from Polyurethane Foam
Complies with GREENGUARD Children and Schools and LEED
requirements
Pass
ASTM C 1338 Fungi Resistance No fungal growth
ASTM D 2856 Closed Cell Content > 92%
ASTM D 6866 Bio-based Content 3%
ASTM D 2863 Oxygen Index 23%
HEATLOK SOY® 200
Technical Data Sheet
HEATLOK SOY® 200 Technical Data Sheet
Rev. 5/4/2010
Page 2 of 2
DEMILEC (USA) LLC® • 2925 Galleria Drive • Arlington, TX 76011
(817) 640-4900 phone • 1.877.DEMILEC (336-4532) toll-free • (817) 633-2100 fax
www.DemilecUSA.com • Info@DemilecUSA.com
Fire Test Results
NFPA 286 Compliant with 2006 IBC Chapter 2603.9, the 2006 IRC 314.6 and the ICC-ES AC 377, Appendix X, for use in attics
and crawl spaces without a prescriptive ignition, thermal barrier or intumescent coating.
Pass
NFPA 285 Complies with the 2006 IBC Chapter 2603.5, Exterior Walls of Type I, II, III and IV buildings of any height. Pass
NFPA 259 Complies with the 2006 IBC Chapter 2603.5, Exterior Walls of Type I, II, III and IV buildings of any height. Pass
Natural and Recycled Content of Finished Foam
Natural Content = 6.30% Post-Consumer Content = 4.6%
Pre-Consumer Content = 9.89% Total Recycled Content = 14.57%
Post-Consumer + ½ Pre-Consumer Recycled Content = 9.63%
Liquid Components Properties
Property Isocyanate A 100 Resin B 200
Color Brown Blue
Specific gravity 1.20 – 1.24 1.20 – 1.24
Shelf life* 1 Year 1 Year
Mixing ratio (volume) 100 100
Viscosity @ 77°F (25°C) 10-7 psi 7 – 9 psi
* See MSDS for more information.
Note: Store the resin at temperatures 59 - 77ºF (15 – 25ºC). Keep away from direct sunlight.
Processing Parameters Recommended Processing Conditions
Imperial units Metric units Imperial units Metric units
Type of machine Graco® Reactor E-30 with Fusion gun and
02 Mixing Chamber
Mixing ration A:B 1:1
Components A & B
temperature
105ºF 41ºC Mixing temperature 100 – 120ºF 38 – 49ºC
Components A & B
pressure
850 – 1000 psi 5860 – 6900 kPa Mixing pressure 800 psi 5516 kPa
Ambient
temperature
73ºF 23ºC Substrate & Ambient
temperature
>14ºF >(-10)ºC
Maximum
Thickness per pass
2 in. 500 mm Curing temperature >14ºF >(-10)ºC
Reactivity Profile
Cream time Gel time Tack free time End of rise
0-1 Seconds 3-4 Seconds 4-5 Seconds 5-6 Seconds
General Information: It is recommended that the foam is covered with an approved thermal barrier in accordance to the local and national building codes when used
in buildings and a protective coating when used outside. This product should not be used when the continuous service temperature of the substrate is outside the
range of -76ºF (-60ºC) to 176ºF (80ºC). Spraying too thick sections too fast may result in charring of the foam, or in extreme conditions a fire may result.
Disclaimer: The information herein is to assist customers in determining whether our products are suitable for their applications. We request that customers inspect
and test our products before use and satisfy themselves as to contents and suitability. Nothing herein shall constitute a warranty, express or implied, including any
warranty of merchantability or fitness, nor is protection from any law or patent infringement. All patent rights are reserved. The foam product is combustible and must
be covered by an approved thermal barrier. Protect from direct flame and sparks contact. The exclusive remedy for all proven claims is replacement of our materials.