IPG FRU88X-6 400 Fabric Specs
INTERTAPE POLYMER GROUP
TECHNICAL DATA SHEET
NovaShield® II with
ArmorKote™
FRU88X-6, 400
DESCRIPTION
Nova-Shield® II FRU88X-6 400 is a heavyweight
fabric for applications requiring UV stability,
such as membrane structures and alternate
daily landfill covers. The scrim is produced in a
special weaving pattern to enhance thickness,
flatness, abrasion resistance, and tear
properties. The proprietary coating is used to
enhance abrasion resistance, flex resistance,
seam strength, UV resistance and longevity.
FABRIC SPECIFICATIONS
Weave: Woven clear HDPE scrim using
natural FR/UV tapes
Coating: LDPE, 4 mil average each side
(95 g/m2/side)
Color: Off-white, blue, green, grey,
sandstone and other colors
available upon request
Weight: 12.4 oz/yd2 (407g/m2) +/- 5 %
Thickness:23 mil (0.50 mm) ASTM D1777
ROLL SPECIFICATIONS
Cores: 4 inch I.D. or 5 inch I.D. available
Width: Up to 150 inches (-0, +0.5) as
ordered
Length: minimum 250 yds/roll; up to 1000
yds/roll
These values are typical data and are not
intended as limiting specifications.
3647 Cortez Road West | Bradenton, FL 34210 | USA
Customer Service: 800.IPG.8273 | 800.474.8273
Tape Technical Service: 877.447.4832
www.intertapepolymer.com | info@itape.com
While we believe them to be reliable, the statements and information herein are only for general guidance and are not warrants or guarantees for accuracy and completeness. The user must, by test or otherwise, determine suitability for this purpose. There is no
warranty of fitness for a particular purpose. Our standard term and
conditions of sale apply exclusively to all orders, and all liability for
damages of any kind, including consequential, exceeding purchase
price is excluded. No one is authorized by us to make oral warranties. We reserve the right to make changes without notice or obligation in our products and publications.
EFFECTIVE: 05/12
PERFORMANCE PROPERTIES
The following data are typical values based on ASTM standard
tests. These data should not be considered specification.
Grab Tensile Warp 360 lb 1598 N / Weft 350 lb 1555 N
ASTM D5034-09
Strip Tensile (N/5cm) Warp 275 lb/in (2444)/Weft 250 lb/in (2222)
ASTM D5035-11
Tongue Tear Warp 120 lb 533 N / Weft 110 lb 489 N
ASTM D2261-07a
Trapezoidal Tear Warp 100 lb 444 N / Weft 90 lb 400 N
ASTM D4533-04(2009)
Mullen Burst 675 psi / 4657 kPa
ASTM D3786-09
Accelerated UV >90 % strength retention after 2000 hrs
Weathering1 exposure @ 0.77 W/m²/nm, or 1200 hrs
ASTM G154-06 exposure @ 1.35 W/m²/nm
Accelerated Natural >80 % strength retention after 5 Florida
Weathering Standard Years²
ASTM G90-10
Low Temperature Bend -60°C
ASTM D2136-02(2007)
1 Q.U.V [A-340 Lamps]; 8 hrs UV @ 60°C; 4hrs condensation @ 50°C 2 1333 MJ
FR PERFORMANCE
This product meets the requirements of NFPA 701 – 2010
(Method 1 and Method 2), 2004 (Method 1 and Method 2),
1989 (large and small scale) and 1996 (tests 1 and 2),
CAN/ULC S109-M87 (small and large scale), CAN/ULC
S102-03, CAN/ULC S102.2-03, ASTM E84-00a (Class 1),
UBC31-1, California Fire Marshal (F-51405).