Sec Construct Controls 2012-11-01Tk~uJ#~f1~
~~p~~
Of'\t A~P~, R~1'>01
~,f1~0210g-161g
P~(6f}) 12/-'>200
Fu (611) 12/-~'>2
SECONDARY CONSTRUCTION CONTROL DOCUMENT
(for Professional Engineers/Architects responsible for only a portion of a controlled project)
Date: October 30, 2012 Project Title:
Project Location: Northampton. Massachusetts
Scope of Project: Additions and Renovations
IN ACCORDANCE WITH SECTION 107.6.2.2 OF THE MASSACHUSETTS STATE BUILDING CODE, 8TH EDITION,
I, Mark W. Felgate, P.E. MASS. REGISTRATION NO. 47531, BEING A REGISTERED PROFESSIONAL
ARCHITECT/ENGINEER HEREBY CERTIFY THAT I HAVE PREPARED OR DIRECTLY SUPERVISED THE
PREPARATION OF ALL DESIGN PLANS, COMPUTATIONS AND SPECIFICATIONS CONCERNING:
ENTIRE PROJECT ARCHITECTURAL STRUCTURAL MECHANICAL
FIRE PROTECTION ELECTRICAL OTHER (specify)
FOR THE ABOVE NAMED PROJECT AND THAT, TO THE BEST OF MY KNOWLEDGE, SUCH PLANS,
COMPUTATIONS AND SPECIFICATIONS MEET THE APPLICABLE PROVISIONS OF THE MASSACHUSETTS
STATE BUILDING CODE, ALL ACCEPTABLE ENGINEERING PRACTICES AND ALL APPLICABLE LAWS FOR
THE PROPOSED PROJECT.
I FURTHER CERTIFY THAT I SHALL PERFORM THE NECESSARY PROFESSIONAL SERVICES AND BE
PRESENT ON THE CONSTRUCTION SITE ON A REGULAR AND PERIODIC BASIS TO DETERMINE THAT THE
WORK IS PROCEEDING IN ACCORDANCE WITH THE DOCUMENTS APPROVED FOR THE BUILDING PERMIT
AND SHALL BE RESPONSIBLE FOR THE FOLLOWING AS SPECIFIED IN SECTION 107.6.2.2:
1. Review of shop drawings, samples and other submittals of the contractor as required by the
construction contract documents as submitted for building permit, and approval for conformance to the.
design concept.
2. Review and approval of the quality control procedures for all code-required controlled materials.
3. Special architectural or engineering professional inspection of critical construction components
requiring controlled materials or construction specified in the accepted engineering practice standards
listed in Appendix B.
PURSUANT TO SECTION 107.6.2.2, I SHALL SUBMIT PROGRESS REPORT TOGETHER WITH PERTINENT
COMMENTS TO THE INSPECTION SERVICES DEPARTMENT. UPON COMPLETION OF THE WORK, I SHALL
SUBMIT A FINAL REPORT AS TO THE SATISFACTORY COMPLETION AND READINESS OF T E PROJECT
FOR OCCUPANCY. .
Signature
J..t,.DY"d:{4...!::;~:ri'~~~===-MY COMMISSION. EXPIRES -'-"-;~"-f--'-'7-""'--'-'o'--!I
Signature and Seal of registered professional:
Tk~tJ;d.~H~
~~Pdf.M:,~
DoN. A~Pkt, R~1101
~,H~0210g-1~1g
P~(~f}) ItJ-1200
Fu (~11) 12/-~12
SECONDARY CONSTRUCTION CONTROL DOCUMENT
(for Professional Engineers/Architects responsible for only a portion of a controlled project)
Dale: October 30, 2012 Project Title:
Project Location: Northampton, Massachusetts
Scope of Project: Additions and Renovations
IN ACCORDANCE WITH SECTION 107.6.2.2 OF THE MASSACHUSETTS STATE BUILDING CODE, 8TH EDITION.
I, Charles P. Sharples, P.E. MASS. REGISTRATION NO. 28940, BEING A REGISTERED PROFESSIONAL
ARCHITECT/ENGINEER HEREBY CERTIFY THAT I HAVE PREPARED OR DIRECTLY SUPERVISED THE
PREPARATION OF ALL DESIGN PLANS, COMPUTATIONS AND SPECIFICATIONS CONCERNING:
ENTIRE PROJECT ARCHITECTURAL STRUCTURAL X MECHANICAL
FIRE PROTECTION ELECTRICAL OTHER (specify)
FOR THE ABOVE NAMED PROJECT AND THAT, TO THE BEST OF MY KNOWLEDGE, SUCH PLANS.
COMPUTATIONS AND SPECIFICATIONS MEET THE APPLICABLE PROVISIONS OF THE MASSACHUSETTS
STATE BUILDING CODE, ALL ACCEPTABLE ENGINEERING PRACTICES AND ALL APPLICABLE LAWS FOR
THE PROPOSED PROJECT.
I FURTHER CERTIFY THAT I SHALL PERFORM THE NECESSARY PROFESSIONAL SERVICES AND BE
PRESENT ON THE CONSTRUCTION SITE ON A REGULAR AND PERIODIC BASIS TO DETERMINE THAT THE
WORK IS PROCEEDING IN ACCORDANCE WITH THE DOCUMENTS APPROVED FOR THE BUILDING PERMIT
AND SHALL BE RESPONSIBLE FOR THE FOLLOWING AS SPECIFIED IN SECTION 107.6.2.2:
1. Review of shop drawings. samples and other submittals of the contractor as required by the
construction contract documents as submitted for building permit, and approval for conformance to the
design concept.
2. Review and approval of the quality control procedures for all code-required controlled materials.
3. Special architectural or engineering professional inspection of critical. construction components
requiring controlled materials or construction specified in the accepted engineering practice standards
listed in Appendix B.
PURSUANT TO SECTION 107.6.2.2. I SHALL SUBMIT PROGRESS REPORT TOGETHER WITH PERTINENT
COMMENTS TO THE INSPECTION SERVICES DEPARTMENT. UPON COMPLETION OF THE WORK, I SHALL
SUBMIT A FINAL REPORT AS TO THE SATISFACTORY C ~PLETION A EAD N,E S OF
FOR OCCUPANCY. y/
30 ruSCRIBED AND SWOR.N TO BEFORE ME THIS _ DAY OF ~h-L) ,.2 0 I ::2
~j(~ .
. . . MY COMMISSION EXPIRES!?j2071 •.20f f A PUBLIC· I' I
Signature and Seal of regislered professional: