Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Kazakiewich, Roger - Ver. 0.06 pt WB SS
RELEASEREVDATE NAMEGOVERNING CODESPARCEL MAP PROJECT LOCATION SHEET INDEX ENGINEERED BY: CONTRACTOR: CONTRACTOR LIC #: PHONE: CONTACT NAME: PHONE: EMAIL: DESIGN BY: PHONE: HOME OWNER PROJECT LOCATION: PROJECT DRAFTER: LICENSE #: PHONE: ELECTRICAL UTILITY: AUTHORITY HAVINGJURISDICTION: BUILDING: CONTACT NAME:PHONE: LICENSE TYPE: PHONE: EMAIL: EMAIL: PHONE:COVER SHEETSHEET SHEET TITLE EMAIL:APNAdvanced Solar Solutions39650 MallardBass Lake, CA 93604 PHONE: 559-321-7000EMAIL: info@advpermits.com ADDRESS ADDRESS kW PHOTOVOLTAIC PLANS PROJECT APN: GENERAL PROJECT & JURISDICTIONAL NOTES 1. UNAUTHORIZED USE OF THIS DRAWING SET WITHOUT EXPRESSEDWRITTEN PERMISSION FROM THE CONTRACTOR AND ADVANCED SOLAR SOLUTIONS IS A VIOLATION OF U.S. COPYRIGHT LAWS AND WILL BE SUBJECT TO CIVIL DAMAGES AND PROSECUTION. APPLICABLE BUILDING CODES: INTERNATIONAL BUILDING CODE INTERNATIONAL RESIDENTIAL CODE INTERNATIONAL FIRE CODE NATIONAL ELECTRIC CODE DESIGN CRITERIA BUILDING OCCUPANCY: RISK CATEGORY: EXPOSURE CATEGORY: SNOW LOAD: SNOW EXPOSURE: CONSTRUCTION TYPE: SCOPE OF WORK NUMBER PROPOSED SOLAR EQUIPMENT SITE / PROJECT DETAILS QTY. EQUIPMENT DESCRIPTION/MFG/MODEL MODULES INVERTER(S) RACKING STANCHIONS RSD DEVICE BATTERY UNIT SYSTEM SIZE DC SYSTEM SIZE AC QTY. STRING/CKT. ELECT. SERVICE PROJECT TEAM LIST COPYRIGHT NOTICE 1. A LADDER SHALL BE IN PLACE FOR INSPECTION IN COMPLIANCE WITH ALL OSHA REGULATIONS. 2. PENDING LOCAL JURISDICTIONAL REQUIREMENTS AND WHEN APPLICABLEALL ELECTRICAL ENCLOSURE DEAD FRONTS, COVERS, DOORS, ETC. SHALE BE OPEN AND ACCESSIBLE FOR INSPECTIONS. WHEN TRENCH AND ROOF INSPECTIONSARE REQUIRED WORK SHALL BE OPEN AND ACCESSIBLE FOR INSPECTOR. INSPECTION REQUIREMENTS 1. WHEN APPLICABLE A SMOKE DETECTOR, APPROVED AND LISTED BY THE STATE FIRE MARSHAL OR ANSI/UL 217 CERTIFIED TO NATIONAL FIRE ALARM AND SIGNALING CODE, NFPA 72 SHALL BE VERIFIED FUNCTIONAL OR INSTALLED IN ALL APPLICABLE CODE REQUIRED LOCATIONS. 2. ALL APPLICABLE EQUIPMENT TO BE UL LISTED OR LISTED BY OTHERJURISDICTIONAL AND UTILITY APPROVED ASSOCIATION OR NATIONALLY RECOGNIZED ORGANIZATION. 3. FULL SCOPE OF WORK SHALL COMPLY WITH ALL APPLICABLE CODES LISTED IN GOVERNING CODES SECTION, ALL MANUFACTURES' LISTINGS, INSTALLATION INSTRUCTIONS AND SPECIFICATIONS AND JURISDICTIONAL REQIREMENTS. JURISDICTIONAL & LISTING REQUIREMENTS 4. REVISED PLANS WILL BE REQUIRED TO BE RESUBMITTED TO THE LOCALJURISDICTION IF THE INSTALLED ARRAY AND ASSOCIATED EQUIPMENT DOES NOT MATCH THE APPROVED BUILDING PLANS. ADDITIONAL FEES MAY ALSOAPPLY. 5. THE PLACEMENT OF A UTILITY PV PRODUCTION METER SHALL BE PROVIDEDAND PLACED BY THE CONTRACTOR AS PER APPLICABLE UTILITY OR AHJREQUIREMENTS. MSP RATINGS COMBINER(S) AZIMUTH TILT ROOF COVERING ⅊ ⅊⅊ ⅊ ℄DRIVEWAYRYAN RD NORTH N/A VB 11.200 KW PV-001 COVER SHEET Kazakiewich, Roger Jake Stocker 2015 National Grid 2015 77495023 2015 21134A(413) 584-8844 2020 Lilian Wanjiku(413) 584-8844 City of Northampton jstocker@valleysolar.solar 50507Civil(202) 874-3483swyssling@wysslingconsulting.com R-3 II Exposure C 40 Scott E. Wyssling 76 North Meadowbrook Dr (413) 584-8844 Alpine, UT 84004 jstocker@valleysolar.solar Kazakiewich, Roger782 Ryan Rd, Northampton, MA 01062 ROOF MOUNTED PV (SOLAR) PROJECT GRID-TIED W/ BATTERY STORAGE 340 Riverside Dr Valley Solar Florence, MA 01062 Q.CELLS Q.PEAK DUO BLK ML-G10+ 400Enphase IQ7PLUS-72-2-US (240V) SnapNrack Ultra Rail UR-40 Snapnrack 242-01220 L Foot INTEGRATED IN INV Enphase Encharge-10 & Encharge-3 2828 N/A 105N/A 2 1 (N) GPS COORDINATES (42.31144,-72.70277) 8.260 KW 3 120/240V - 1 15°,22° 226°,136° MAX ARRAY HGT. 117 N/A Comp Shingle N-001 GENERAL NOTES PV-100R PV ARRAY LAYOUT S-100 RACKING LAYOUT S-200 SECTION ELEVATION S-201 ATTACHMENT DETAILS E-001 EQUIP. CALCULATIONMETER NUMBER:E-002 WIRE AND COND. CALCS E-003 THREE LINE DIAGRAM E-100 ELECTRICAL LAYOUT P-001 STANDARD PLACARDS P-002 DYNAMIC PLACARDS R-1xx EQUIP.CUT SHEETS Enphase X-IQ-AM1-240-3-ES 225A BUS/200A DE-RATED MB BACK-FED BREAKER PV-001ASCE 7-10 WIND SPEED:Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMITSigned 10-26-21 RELEASEREVDATE NAME ADDRESSAPNGENERAL NOTES ADDRESS kW PHOTOVOLTAIC PLANS GENERAL NOTES:* PROPER ACCESS AND WORKING CLEARANCE AROUND EXISTING AND PROPOSED ELECTRICAL EQUIPMENT WILL BE PROVIDED AS PER SECTION NEC 110.26. PV SYSTEM COMPONENTS; INCLUDING BUT NOT LIMITED TO, MODULES, INVERTERS AND SOURCE CIRCUIT COMBINERS ARE IDENTIFIED AND LISTED FOR USE IN PV SYSTEMS IN COMPLIANCE WITH NEC 690.4 AND 690.6 AND ALL UL, IEC, IEEE CLASSIFICATIONS AS REQUIREMENTS. RAPID SHUTDOWN NOTES:* PV SYSTEM CIRCUITS INSTALLED ON OR IN BUILDIDNG SHALL INCLUDE A RAPID SHUTDOWN FUNCTION THAT CONTROLS SPECIFIC PV CONDUCTORS IN ACCORDANCE WITH 2020 NEC 690.12(A)-(D) EQUIPMENT LOCATIONS & ELECTRICAL NOTES:* JUNCTION AND PULL BOXES ARE PERMITTED TO BE INSTALLED UNDER PV MODULES IN COMPLIANCE WITH NEC 690.34. ADDITIONAL AC DISCONNECT(S) SHALL BE PROVIDED WHERE THE INVERTER IS NOT WITHIN SIGHT OF THE AC SERVICING DISCONNECT. 2020 NEC 690.15(A) ALL EQUIPMENT SHALL BE INSTALLED ACCESSIBLE TO QUALIFIED PERSONNEL IN COMPLIANCE WITH NEC APPLICABLE CODES. ALL COMPONENTS ARE LISTED FOR THEIR INTENDED PURPOSE AND RATED FOR OUTDOOR USAGE WHEN APPLICABLE. STRUCTURAL AND INSTALLATION NOTES:* RACKING SYSTEM & PV PANELS MOUNTED ON A ROOFTOP SHALL BE LISTED AND LABELED IN ACCORDANCE WITH UL 1703 AND SHALL BE INSTALLED IN ACCORDANCE WITH THE MANUFACTURER INSTALLATION INSTRUCTIONS. ALL PV RACKING ATTACHMENT POINTS SHALL NOT EXCEED THE PRE-ENGINEERED MAX SPANS OUTLINED BY THE RACKING MANUFACTURES ENGINEER OF RECORD. GROUNDING NOTES:* IN UNGROUNDED SYSTEMS ONLY THE DC CONDUCTORS ARE UNGROUNDED AND REQUIRE AN EQUIPMENT GROUNDING CONDUCTOR. ALL METAL ELECTRICAL EQUIPMENT AND STRUCTURAL COMPONENTS BONDED TO GROUND, IN COMPLIANCE WITH NEC 250.134 AND NEC 250.136(A). PV EQUIPMENT INCLUDING MODULE FRAMES AND OTHER METAL PARTS SHALL BE GROUNDED IN COMPLIANCE WITH NEC 690.43 AND MINIMUM GROUND CONDUCTORS SIZED IN ACCORDANCE WITH NEC TABLE 250.122. CONDUCTIVE PARTS OF MODULE FRAMES, MODULE RACKING, AND ENCLOSURES SHALL BE GROUNDED IN COMPLIANCE WITH NEC 250.134 AND NEC 250.136(A). UL2703 APPROVED MODULE AND RACK GROUNDING SHALL BE USED AND INSTALLED PER MANUFACTURER'S INSTALLATION MANUAL. IF UL2703 APPROVED GROUNDING IS NOT USED, MODULE GROUNDING LUGS MUST BE INSTALLED AT THE SPECIFIED GROUNDING LUG HOLES PER THE MANUFACTURER'S INSTALLATION REQUIREMENTS. THE GROUNDING CONNECTION TO A MODULE SHALL BE ARRANGED SUCH THAT THE REMOVAL OF A MODULE DOES NOT INTERRUPT A GROUNDING CONDUCTOR TO ANOTHER MODULE. THE GROUNDING ELECTRODE SYSTEM COMPLIES WITH NEC 690.47 AND NEC 250.50 THROUGH NEC 250.106. IF EXISTING SYSTEM IS INACCESSIBLE OR INADEQUATE, A GROUNDING ELECTRODE SYSTEM WILL BE PROVIDED IN COMPLIANCE WITH NEC 250, NEC 690.47 AND AHJ. PV SYSTEMS SHALL BE PROVIDED WITH DC GROUND- FAULT PROTECTION 2020 NEC 690.41(B) INTERCONNECTION / POC NOTES:* ALL LOAD-SIDE INTERCONNECTIONS ARE IN COMPLIANCE WITH 2020 NEC 705.12(B) THE TOTAL RATING OF ALL OCPD IN SOLAR LOAD CENTERS SHALL NOT EXCEED THE RATED AMPACITY OF THE BUSBAR EXCLUDING THE OCPD PROTECTING THE BUSBAR IN COMPLIANCE WITH NEC 705.12(B)(2)(3)(c) ALL FEEDER TAP (LOAD SIDE) INTERCONNECTIONS ARE IN COMPLIANCE WITH 2020 NEC 705.12(B)(2)(1) THE PV SYSTEM BACK-FEED BREAKER SHALL BE INSTALLED ON THE OPPOSITE END OF THE BUS BAR AND IT SHALL ALSO BE SIZED APPROPRIATELY AS PER 2020 NEC 705.12(B)(2)(3)(b) SUPPLY SIDE TAP INTERCONNECTIONS ARE IN COMPLIANCE WITH NEC 705.12(A) WITH SERVICE ENTRANCE CONDUCTORS IN COMPLIANCE WITH NEC 230.42 BACKFEEDING BREAKER FOR INVERTER OUTPUT IS EXEMPT FROM ADDITIONAL FASTENING 2020 NEC 705.12(B)(5) MICROINVERTER BRANCH CIRCUITS SHALL BE CONNECTED TO A SINGLE OCPD IN ACCORDANCE WITH THEIR INSTALLATION INSTRUCTIONS AND NEC 690.9 DISCONNECTS AND OCPD NOTES:* ALL DISCONNECTING SWITCHES WILL BE CONFIGURED SO THAT ALL ENERGIZED CONDUCTORS WHEN DISCONNECT IS OPEN SHALL BE ON THE TERMINALS MARKED, “LINE SIDE” (TYPICALLY THE UPPER TERMINALS) ALL AC DISCONNECTS SHALL BE LABELED, LOCKABLE, OF VISIBLE BREAK TYPE SWITCH WITH EXTERNAL HANDLE AND ACCESSIBLE TO QUALIFIED UTILITY PERSONNEL. AC DISCONNECTS SHALL BE A “KNIFE BLADE” TYPE DISCONNECT. IF EXTERIOR, RATED TO NEMA 3R OR BETTER PER NEC 110.28 ADDITIONAL AC DISCONNECTS SHALL BE PROVIDED WHERE THE INVERTER IS NOT ADJACENT TO THE UTILITY AC DISCONNECT, OR NOT WIHTIN SIGHT OF THE UTILITY AC DISCONNECT. 2020 NEC 690.15(A) BOTH POSITIVE AND NEGATIVE PV CONDUCTORS REMAIN UNGROUNDED. THEREFORE, BOTH SHALL REMAIN OPEN WHERE A DISCONNECT IS REQUIRED IN COMPLIANCE WITH 2020 NEC 690.15(D) ALL OCPD RATINGS AND TYPES SPECIFIED SHALL BE IN COMPLIANCE WITH NEC 690.8, 690.9, 705.12 AND 240. BOTH POSITIVE AND NEGATIVE DC PV CONDUCTORS ARE UNGROUNDED; BOTH REQUIRE OVERCURRENT PROTECTION IN COMPLIANCE WITH NEC 690.9 ARC FAULT (AFCI) DC CIRCUIT PROTECTION IS REQUIRED FOR ALL PV SYSTEMS ON OR PENETRATING A BUILDING WITH A MAXIMUM SYSTEM VOLTAGE OF 80 VOLTS OR GREATER. ALL DC PV CIRCUITS INSTALLED IN OR ON BUILDINGS WILL BE ARC-FAULT CIRCUIT PROTECTED IN COMPLIANCE WITH NEC 690.11, UL1699B AND SHALL BE LISTED AND LABELED IN ACCORDANCE WITH UL 1699 (B). WIRING & CONDUIT NOTES:* ALL CONDUIT AND CONDUCTORS SHALL BE APPROVED FOR THEIR INTENDED PURPOSE INCLUDING WET LOCATIONS AND EXPOSED TO SUNLIGHT. CONDUIT AND CONDUCTOR SIZE SPECIFICATIONS ARE BASED ON THE MINIMUM CODE REQUIREMENTS AND ARE NOT LIMITED TO UP SIZING. ALL CONDUCTORS SHALL BE SIZED IN COMPLIANCE WITH NEC 690.8, NEC 690.7. ALL CONDUCTORS SHALL BE DERATED AS APPLICABLE TO THEIR RESPECTIVE ENVIRONMENT INCLUDING DIRECT SUNLIGHT IN ACCORDANCE WITH 2020 NEC 310.15(B)(3)(4)(c) EXPOSED UNGROUNDED DC PV SOURCE AND OUTPUT CIRCUITS SHALL USE CONDUCTORS LISTED AND IDENTIFIED AS PHOTOVOLTAIC (PV) WIRE IN COMPLIANCE 2020 NEC 690.31(C)(1). PV MODULES WIRE LEADS SHALL BE LISTED FOR USE WITH UNGROUNDED SYSTEMS IN COMPLIANCE WITH 2020 NEC 690.4(B) PV WIRE BLACK WIRE MAY BE FIELD-MARKED WHITE IN COMPLIANCE WITH NEC 200.6 (A)(6). PV MODULE CONDUCTORS LOCATED UNDER ARRAYS WILL BE SECURED IN A WORKMANLIKE MANNER IN COMPLIANCE WITH NEC 110.12. WATERPROOFING:* ALL NEW ROOFTOP PENETRATIONS SHALL BE SEALED AND MADE WEATHER TIGHT WITH APPROVED CHEMICAL SEALANT AND FLASHINGS WHERE REQUIRED PER CODE AND GENERAL BUILDING AND ROOFING WORKMANSHIP STANDARDS BY A LICENSED CONTRACTOR. ALL EXTERIOR ELECTRICAL EQUIPMENT, SHALL BE NEMA 3R OR BETTER RATED. ALL EXTERIOR CONDUIT AND CONNECTORS SHALL BE RATED FOR WET LOCATIONS. *ALL NOTES ARE AS APPLICABLE TO THIS PROJECT. DISREGARD ANY NOTES THAT DO NOT APPLY TO THIS PROJECT.N-001Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMITSigned 10-26-21 RELEASEREVDATE NAME ADDRESSAPN2015 IFC ROOF ACCESS REQUIREMENTS PV SITE LAYOUT LEGEND * EXISTING DIMENSIONS ARE APPROX.CONFIRM ALL DIMENSIONS SHOWN PV ARRAY LAYOUTSQUARE FOOTAGE CALCULATIONS ROOF REFERENCE SQUARE FOOTAGE TOTAL PERCENTAGE AZIMUTH AND TILT TABLE SECTION #AZIMUTH ROOF PITCH / TILT EXISTING ROOF ADDRESS kW PHOTOVOLTAIC PLANSSECTION 1 ROOF ACCESS POINT SITE ACCESS GATE ACCESS SECTION 1 PV ARRAY TAGSECTION #MODULE GROUP RA SA GA NOTE: ALL ELECTRICAL LAYOUT DETAILS ON SHEET E-100 SECTION 3 SECTION 2 SECTION 1 RA RA NORTH THIS SHEET REPRESENTS THE SOLAR MODULE LAYOUT ON ROOFTOP. SHADED DASHED LINE NEAR PERIMETER OF STRUCTURE EXTERIOR IS PHOTOVOLTAIC MODULES ARE SCALED IN PLAN VIEW AND MAY NOT BE AN ACCURATELY SCALED REPRESENTATION OF THE ACTUAL SCALEAND GEOMETRY OF THE PHOTOVOLTAIC MODULE. ACTUAL PHOTO- VOLTAIC MODULE DIMENSIONS ARE ON SHEET E-001 FOR THE PURPOSE OF CLARITY, ALL ELECTRICAL LAYOUT DETAILS ARE LOCATED ON SHEET E-100. A. B. C. AN APPROXIMATE REPRESENTATION OF THE EXTERIOR WALL LOCATION PV AC DISCONNECT LOCATED ON ACCESSIBLE EXTERIOR WALL WITH EXTERNAL HANDLE VISIBLE, LOCKABLE & LABELED WITHIN 10 FEET OF THE METER SCALE: 1/8” = 1’0” @ SHEET SIZE A3 1900 SECTION-1 106 31.16% 226 15°SECTION-1 136 22°SECTION-2 SECTION-3 136 22° 296 190SECTION-2 SECTION-3 QTY 28 Q.CELLS Q.PEAK DUO BLK ML-G10+ 400, QTY 28 Enphase IQ7PLUS-72-2-US (240V) MICRO INVERTER PV-100RValley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMITSigned 10-26-21 SHEET NOTES RELEASEREVDATE NAME ADDRESS* EXISTING ROOF DIMENSIONS ARE APPROX.CONFIRM ALL DIMENSIONS SHOWN PV RACKING LEGEND RACKING LAYOUTRACKING BILL OF MATERIALS (BOM) COMPONENT QTY MODEL LENGTH PV RAIL 1 PV RAIL SPLICE 1 PV RAIL 2 PV RAIL SPLICE 2 RAIL TO ROOFATTACHMENT EXISTING ROOF CONSTRUCTION COMPONENT TYPE ROOF STRUCTURALCONSTRUCTION ROOFING COVERING RACKING MAX PSF ROOF RACKING RAIL SPLICE ROOF RACKING STANCHION W/RETRO FIT FLASHING * DETAILS IN TOP VIEW SECTION 1 PV ARRAY TAGSECTION #MODULE GROUP B. ANCHOR SPACING SHOWNIN DETAIL. UNLESS NOTEDOTHERWISE PER RACKINGMANUFACTURER CERTIFIEDENGINEERED PRODUCT ANDLOCAL REQUIREMENTS. SEE"TABLE OF DIMENSIONS" EACH SECTION DETAILED FORHORIZONTAL ANCHOR SPACING. C.SEE SHEET S-200 FOR SPECIFIC RACKING COMPONENTMANUFACTURERS. ADDRESSAPN kW PHOTOVOLTAIC PLANSFRAMING INFO ROOF RACKING RAIL 18'-6"17'-2''20'-7"9'-7''9'-7''6'-10"NORTH SCALE: 1/8” = 1’0” @ SHEET SIZE A3 Rafter-Simple Attic 16" O.C. 2"x6" @ 16" MAX OC Comp Shingle 2.91 PSF QTY 28 Q.CELLS Q.PEAK DUO BLK ML-G10+ 400, QTY 28 Enphase IQ7PLUS-72-2-US (240V) MICRO INVERTER S-100A. FOR MANUFACTURED PLATED WOOD TRUSSES AT SLOPES OF FLAT TO 6:12, THE HORIZONTAL ANCHOR SPACING SHALL NOT EXCEED 4’-0” AND ANCHORS IN ADJACENT ROWS SHALL BE STAGGERED. UNLESS NOTED OTHERWISE PER RACKING MANUFACTURER CERTIFIED ENGINEERED PRODUCT AND LOCAL REQUIREMENTS.Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMITSigned 10-26-21 SHEET NOTES RELEASEREVDATE NAME ADDRESSAPNPV RACKING LEGEND 21SCALE: NTS 3 4 A.THESE NOTES APPLY TO RAFTER ROOF CONSTRUCTION. B.THE ROOF STRUCTURE CONFORMED TO BUILDING CODEREQUIREMENTS AT THE TIME IT WAS BUILT. C. STRAND BOARD OR PLYWOOD. 1X SKIP SHEATHING IS ACCEPTABLE. D.THE SOLAR ARRAY DISPLACES ROOF LIVE LOADS (TEMPORARYCONSTRUCTION LOADS) THAT THE ROOF WAS ORIGINALLY DESIGNED TO CARRY. E.IF THE ROOF COVERING IS SHINGLES; IT SHALL BE NO MORETHAN TWO LAYERS. (SHOWN) F.IF ROOF COVERING IS TILE; ITS A SINGLE LAYER. ALL TILES ONPLANE OF PV COMPONENTS ARE SECURE. (NOT SHOWN IN DETAIL) G.THE ROOF STRUCTURE IS STRUCTURALLY SOUND, WITHOUTSIGNS OF ALTERATIONS OR SIGNIFICANT STRUCTURAL DETERIORATION OR SAGGING. H.THE PV MODULES ARE PARALLEL WITH THE ROOF SURFACE. I. AND THE ROOF SURFACE. (SEE TABLE OF DIMENSIONS "H1") J.UPSLOPE ANCHOR SPACING MAY VARY FROM LISTED TABLES. STANCHIONS CAN BE PLACED NO CLOSER THAN 24" O.C. K. # SCALE: NTS SCALE: NTSSCALE: NTS SECTION ELEVATIONSTABLE OF DIMENSIONS DIM COMPONENT DIMENSIONS DIM COMPONENT DIMENSIONS OH1 OVERHANG IN THIS AREA R1 RIDGE BEAM DEPTH RISE ROOF PITCH R2 RAFTER DEPTH THIS AREA H1 PV MODULE HGT. ABOVE ROOF HS1 HORIZONTAL SPAN HS2 HORIZONTAL SPAN UPSLOPE ANCHOR SPACING D1 RAIL OVERHANG D3 STANCHION O.C. D2 STANCHION O.C.D4 MIN./MAX. STANCHION O.C. TABLE OF COMPONENTS COMPONENT MODEL 1 PV RAIL TYPE 1 2 PV RAIL SPLICE TYPE 1 3 PV RAIL TYPE 2 4 PV RAIL SPLICE TYPE 2 5 STANCHION 6 FLASHING 7 MID CLAMP 8 END CLAMP EXISTING ROOF CONSTRUCTION COMPONENT TYPE MEAN ROOF HGT MAX ROOFING COVERING TABLE OF DIMENSIONS DIM COMPONENT DIMENSIONS DIM COMPONENT DIMENSIONS OH1 OVERHANG IN THIS AREA R1 RIDGE BEAM DEPTH RISE ROOF PITCH R2 RAFTER DEPTH THIS AREA H1 PV MODULE HGT. ABOVE ROOF HS1 HORIZONTAL SPAN HS2 HORIZONTAL SPAN UPSLOPE ANCHOR SPACING D1 RAIL OVERHANG D3 STANCHION O.C. D2 STANCHION O.C.D4 MIN./MAX. STANCHION O.C. * DETAILS IN SECTION OR SIDE VIEW ROOF RACKING RAIL SPLICE ROOF RACKING STANCHION W/ RETRO FIT FLASHING SECTION 1 PV ARRAY TAGSECTION #MODULE GROUP ADDRESS kW PHOTOVOLTAIC PLANSPER RAIL MANUFACTURER MAX RAFTER SPANMAX RAFTER SPAN L. DETAILS SHOWN ARE A REPRESENTATION OF EXISTING ROOF CONDITIONS. ACTUAL FIELD CONDITIONS MAY VARY. DETAILS ARE SHOWN FOR DIAGRAM USE ONLY. REFER TO TABLES FOR DESIGN CRITERIA. ALL PLUMBING AND ROOF VENTS SHALL NOT BE OBSTRUCTEDBY PV MODULES AND EQUIPMENT. M. ROOF RACKING RAIL * IF BLOCKING REQUIRED32 S-201 1 S-201 HORIZONTAL SPAN 12 RIDGE BEAM FRAMING 1 5 6 7 RISE 3 OH1HS1 PV 1 D3 D2 D1 D2H1R2R1 ** COMP SHINGLE ROOF IN EXAMPLE. SAME ATTACHMENT FOR STANDING SEAM METAL ROOF APPLIES. * IF BLOCKING REQUIRED32 S-201 1 S-201 HORIZONTAL SPAN 12 RIDGE BEAM FRAMING 1 5 6 7 RISE 3 OH1HS1 PV 1 D3 D2 D1 D2H1R2R1 ** COMP SHINGLE ROOF IN EXAMPLE. SAME ATTACHMENT FOR STANDING SEAM METAL ROOF APPLIES. PARTS LIST DESCRIPTIONPART NUMBERQTYITEM SNAPNRACK, UMBRELLA LAG, TYPE 3, 4IN, SS242-9226611 SNAPNRACK, ULTRA FOOT FOR U FLASHING, SILVER / BLACK242-01219, 242-0122012 SNAPNRACK, COMP FLASHING, 9IN X 12IN, SILVER / BLACK ALUM232-01375, 232-0137613 3 1 2 2 (E) RAFTER@ 16" O.C. TYPICAL 1'-4"TYP 4'-0"MAX SIMPLE ATTIC / RAFTER - PORTRAIT SIMPLE ATTIC / RAFTER - LANDSCAPE STANCHION DETAIL STANCHION SPACING DETAIL Ultra Rail UR-40 242-01220 L Foot L-Foot Flashing 15°,22° 3" - 6" TYP 10.28" 20.57" 20.82" 6"15°,22° 3" - 6" TYP 18.48" 36.95" 37.2" 6" 25' Comp Shingle NOT USED 14'-4" MAX 14'-4" MAX S-200PER RAIL MANUFACTURER PER RAIL MANUFACTURER PER RAIL MANUFACTURER Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMITSigned 10-26-21 SHEET NOTES RELEASEREVDATE NAME ADDRESSAPNPV RACKING LEGEND * DETAILS IN SECTION OR SIDE VIEW 1. (1) ENGINEERING. 2.ADHERE TO RACKING MANUFACTURERS INSTALLATION INSTRUCTIONS PERTAINING TO CANTILEVER. 21SCALE: NTS 3 4 SCALE: NTS SCALE: NTSSCALE: NTS ATTACHMENT DETAILSROOF RACKING RAIL SPLICE ROOF RACKING STANCHION W/RETRO FIT FLASHING SECTION 1 PV ARRAY TAGSECTION #MODULE GROUP ADDRESS kW PHOTOVOLTAIC PLANSROOF RACKING RAILALL ANCHOR LAGS TO BE MINIMUM 2-1/2"EMBEDMENT INTO FRAMING MEMBERS (E) ROOF SHEATHING /DECKING (E) FRAMING MEMBER L-FOOT PV MODULE, BY OTHERS MODULE END CLAMP SNAPNRACK ULTRA RAIL L-FOOT FLASHING5/16”-18 X 2-1/4” SS HCS BOLT 1/3" OF TOTAL SPAN MAX 2/3" OF TOTAL SPAN MAX RAIL MANUFACTURERRAIL SPLICE KITSEE "S-100 / TABLE OF COMPONENTS" SPACING VARIES STAGGER STANCHIONS WHERE POSSIBLE.SEE SHEET "S-100" FOR:HORIZONTAL ANCHOR SPAN SPACING. (E) FRAMINGTYPICAL * MODULES SHOWN PORTRAIT IN EXAMPLE DCAND/OR 1/3CANT.MAX COMPONENT +2" FROM SIDEOF MODULE 2" ROOF TOPCONDUIT EXTENSION OF RAIL RAIL OR STRUTCONNECTIONS TO MEETWEIGHT REQ. OF EQUIPMENT DCB * MODULES SHOWN PORTRAIT IN EXAMPLE** RAILING SHOWING IN VERTICAL IN EXAMPLE RIDGE BEAM *R2*R1VERIFY THAT NODIAGONAL AND/OR VERTICALATTIC/FRAMING STRUT MEMBERSARE CUT OR NOTCHED * SEE DETAILS "1-2/S200" TABLE OF DIMENSIONS HOLES ALLOWED ONLY IN MIDDLE HALF OF FRAMING SPAN 1/4 1/4 HOLES ALLOWED ONLY IN MIDDLE THIRDOF FRAMING DEPTH, *R2, AND NO LARGERTHAN *R2/4 IN DIAMETER. MINIMUMSPACING BETWEEN HOLES AT *R2 FRAMING SAG IN INCHES NOTTO EXCEED FRAMING LENGTHIN FEET DIVIDED BY 20 NOTCHES DEEPER THAN 1/4"NOT ALLOWED ALONG TOP ORBOTTOM EDGE OF FRAMING NOTE: WHERE FRAMING IS VISIBLE FROM ATTIC &/OR UNDERSIDE OF ROOF,VISUALLY REVIEW FRAMING TO VERIFY THAT NO SIGNIFICANT STRUCTURALDECAY OR UN-REPAIRED FIRE DAMAGE EXISTS. RIDGE SAG IN INCHES NOT TO EXCEED RIDGELENGTH IN FEET DIVIDED BY 20 STANCHION ATTACHMENT DETAIL WITH FLASHING RAIL SPLICE DETAIL - HORIZONTAL RAIL RAIL EXTENSION DETAIL RAFTER HOLE AND CONSTRUCTION DETAIL S-201Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMITSigned 10-26-21 RELEASEREVDATE NAME ADDRESSAPNEQUIP. CALCULATIONSPV SYSTEM MAXIMUM VOLTAGE (MODULE VocMAX) DATA SOURCE SOLARABCS.ORG/ABOUT/PUBLICATIONS/REPORTS/ EXPEDITED-PERMIT/MAP/ EXTREME MIN. STCTEMPERATURE CORRECTEDTEMPERATURE MFR. PMAX TEMPCOEFFICIENT[-0.#%/C] * 100 FORMULA CORRECTEDTEMP.COEFFICIENT MODULE Voc[VDC] TEMPERATURECORRECTEDOPEN CIRCUITVOLTAGE-=*+=*= PV MODULE #1 SPECIFICATIONS MANUFACTURER MODEL NUMBER WEIGHT Ibs DIMENSIONS L" x W" x D"/THICK PEAK POWER @ STC (Pmax)WATTS Voc (OPEN-CIRCUIT VOLTAGE)VOLTS DC Vmp (MAX-POWER VOLTAGE)VOLTS DC isc (SHORT-CIRCUIT CURRENT)AMPS imp (SHORT-CIRCUIT POWER)AMPS MFR. Voc TEMP COEFFICIENT %/K MAX SERIES FUSE RATING AMPS TEMP. CORRECTED Voc VOLTS DC AC COMBINER (SOLAR LOAD CENTER) MANUFACTURER MODEL NUMBER RATED OPERATIONAL VOLTAGE VOLTS RATED CURRENT AMPS NUMBER OF POLES P NEMA RATING MAIN BREAKER SIZE TOTAL INPUT CURRENT AMPS NUMBER OF BRANCH CIRCUITS AMPS CIRCUITS MAIN SERVICE PANEL (IF APPL.) NEW OR EXISTING ELECTRICAL SERVICE BUSS BAR RATED CURRENT AMPS MAIN BREAKER RATED CURRENT AMPS AMPS AMPS AMPS (Imax) AMPS (Imax) AC SUB-PANEL #2 (IF APPL.) NEW OR EXISTING MAKE / MODEL TYPE OF PANEL NUMBER OF POLES P NEMA RATING BUSS BAR RATING AMPS SUB-PANEL MAIN BREAKER AMPS MAIN SERVICE PANEL P.O.C. BREAKER AMPS SUM OF EXISTING CIRCUIT BREAKERS AMPS MAX ALLOWABLE SOLAR CURRENT AMPS AMPS (Imax) AMPS (Imax) MICRO INVERTER #1 SPECIFICATIONS MANUFACTURER MODEL NUMBER NOMINAL POWER RATING WATT AC WEIGHT Ibs.DC INPUT Max PV POWER @ MODULE STC WATTS Max INPUT DC VOLTAGE VOLTS DC Max INPUT CURRENT AMPS MODULES PER MICRO INVERTER QTYAC OUTPUT NOMINAL VOLTAGE OUTPUT VOLTS AC MAX OVERCURRENT PROTECTION (OCPD)AMPS MAX. OUTPUT CURRENT AMPS - MAX ADDRESS kW PHOTOVOLTAIC PLANSAC DISCONNECT #1 (PV) MANUFACTURER AMPS MODEL NUMBER DISCONNECT DEVICE TYPE RATED OPERATIONAL VOLTAGE VOLTS RATED CURRENT AMPS NUMBER OF POLES P NEMA RATING FUSE RATING AMPS TOTAL INPUT CURRENT QUANTITY AC DISCO.(S) PV BACKFEED BREAKER #1 PV BACKFEED BREAKER #2 AMPS (Imax) SUM OF EXISTING CIRCUIT BREAKERS MAX ALLOWABLE SOLAR CURRENT 100% MAX ALLOWABLE SOLAR CURRENT 120% PV BACKFEED BREAKER #1 PV BACKFEED BREAKER #2 ALT. ENERGY BACKFEED BREAKER (IF APPL.)AMPS (Imax) 4 6EXIH GSRXMR S W S XT X TS IVs O:% 4IEO S XT X TS IV O:% WIGSRHW 2SQMREP SPXE I VER I :% 2SQMREP VIU IRG VER I , 6EXIH S XT X G VVIRX % 4IEO S XT X G VVIRX % WIGSRHW 4S IV EGXSV EHN WXEFPI PIEHMR PE MR 1E MQ Q RMXW TIV % FVERGL GMVG MX RMX WMR PI TLEWI -RXIVGSRRIGXMSR 7MR PI TLEWI 1E MQ Q % WLSVX GMVG MX E PX G VVIRX S IV G GPIW %VQW Round trip ef ciency² ) 8SXEP GETEGMX O;L 9WEFPI GETEGMX O;L Round trip ef ciency 2SQMREP ( SPXE I : 1E MQ Q ( SPXE I : %QFMIRX STIVEXMR XIQTIVEX VI VER I XS XS RSR GSRHIRWMR 3TXMQ Q STIVEXMR XIQTIVEX VI VER I XS XS LIQMWXV 0MXLM Q MVSR TLSWTLEXI 0 4 ) 2 0 ( (MQIRWMSRW ; , ( QQ QQ QQ MR MR MR ;IM LX 8LVII MRHM MH EP O PFW FEWI RMXW TP W O PFW GS IV ERH QS RXMR FVEGOIX XSXEP O PFW )RGPSW VI 3 XHSSV 2)1% X TI 6 -5 %8 QMGVSMR IVXIV IRGPSW VI 2)1% X TI SSPMR 2EX VEP GSR IGXMSR 2S ERW %PXMX HI 9T XS QIXIVW IIX 1S RXMR ;EPP QS RX ENERGY STORAGE SYSTEM #1 SPECIFICATIONS ()0 2 ) )2 ,%6 ) ) LIQMW V ;IM L )RGPSW VI SSPMR %P M HI 1S R MR ()0 2 ) )2 ,%6 ) 4 2% 4 6E IH GSR MR S W S T TS IV O:% 4IEO S T TS IV O:% WIGSRHW 2SQMREP SP E I VER I :% 2SQMREP VIU IRG VER I , 6E IH S T G VVIR % 4S IV EG SV EHN W EFPI PIEHMR PE MR 1E MQ Q RM W TIV % FVERGL GMVG M 8LVII RM W WMR PI TLEWI -R IVGSRRIG MSR 7MR PI TLEWI Round trip ef ciency² 9WEFPI GETEGM O;L Round trip ef ciency 1E MQ Q ( SP E I : %QFMIR STIVE MR IQTIVE VI VER I S S RSR GSRHIRWMR 3T MQ Q STIVE MR IQTIVE VI VER I S S 0M LM Q MVSR TLSWTLE I 0 4 ) 2 0 ( (MQIRWMSRW ; , ( QQ QQ QQ MR MR MR 3RI IEGL O PFW FEWI RM TP W O PFW GS IV ERH QS R MR FVEGOI S EP O PFW 3 HSSV 2)1% 6 2E VEP GSR IG MSR 2S ERW 9T S QI IVW II ;EPP QS R ENERGY STORAGE SYSTEM #2 SPECIFICATIONS AC DISCONNECT #2 (BATTERY) MANUFACTURER AMPS MODEL NUMBER DISCONNECT DEVICE TYPE RATED OPERATIONAL VOLTAGE VOLTS RATED CURRENT AMPS NUMBER OF POLES P NEMA RATING FUSE RATING AMPS TOTAL INPUT CURRENT QUANTITY AC DISCO.(S) Q.CELLSQ.PEAK DUO BLK ML-G10+ 40048.573.9 x 41.14 x 1.2640045.3037.1311.1410.77-0.2720.0 EnphaseIQ7PLUS-72-2-US (240V)2902.38 2906015.01 240201.21 EnphaseX-IQ-AM1-240-3-ES24012523RN/A33.883 EatonDG222URB NON-FUSIBLE DISCONNECT120/2406023RN/A 33.88 New120/240V Single Phase225200 257050 -20 25 -45 -0.27%0.12 1 1.12 45.30 50.74 50.74 1 E-001Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMITEatonDG222URB NON-FUSIBLE DISCONNECT120/2406023RN/A21.3 1 ≤ ≤RELEASEREVDATE NAME ADDRESSAPNDC WIRE AND CONDUIT SIZING CHART [SEE SHEET E-003 FOR THREE LINE DIAGRAM] TAG CIRCUITORIGIN CIRCUIT CONDUCTORSPECIFICATIONS REQUIRED CONDUCTOR AMPACITY CONDUCTOR TEMPERATURE DERATING CONDUIT FILLDERATING CORRECTED AMPACITY CALCULATION AMPACITY CHECK TEMPRATING TRADESIZE AMPACITY PER 310.16 MAXCURRENT690.8 (A)(1) CONT.OPERATION690.8 (B)(1) REQUIREDAMPACITY CIRCUITENVIRONMENT AMBIENTTEMP. HGT.ABOVEROOF (in) TEMP.ADDER PER310.15(B)(2)(c) OPERAT.TEMP. AMPACITYCORRECTION310.15(B)(2)(a) # OFUNGRND.COND. AMPACITYCORRECTION310.15(B)(3)(a) COND.AMPACITY TEMP.DERATING CONDUITFILLDERATINGX X X = X X =CORRECTEDAMPACITY REQUIREDAMPACITY CORRECTEDAMPACITY DC1 X X X = X X =WIRE AND COND. CALCS.1. ANY CONDUCTOR LENGTH UNDER 50' DOESN'T REQUIRE VOLTAGE DROP CALCULATIONS DEEMED QUESTIONABLE TO PREVENT ISSUES RELATED TO USING CONDUCTORS THAT ARE IMPROPERLY SIZED.3. PV DC WIRING AC WIRING 2. BECAUSE WE ARE UNABLE TO DETERMINE THE EXACT PATH THE INSTALLER WILL RUN CONDUCTORS; WORST CASE SCENARIOS, ROUNDING UP SIZES OF CONDUCTORS THAT ARE EQUIPMENT GROUND GREEN OR BARE, OR GREEN/YELLOW EQUIPMENT GROUND GREEN OR BARE, OR GREEN/YELLOW TYPICALLY NEGATIVE WHITE OR GRAY (NEUTRAL)WIRING METHODS IN THESE CALCULATIONS DON'T EXCEED 1000 VOLTS GROUNDED CONDUCTOR. GROUNDED CONDUCTOR WHITE OR GRAY UNGROUNDED CONDUCTOR(S).TYPICALLY POSITIVE ANY COLOR OTHER THAN GREEN OR WHITE/GRAY UNGROUNDED L1 AND L2 ANY COLOR OTHER THAN GREEN OR WHITE/GRAY ALLOWED. CONVENTION IS RED FOR GROUNDED SYSTEMS CONDUCTOR(S) HOT: CONVENTION IS L1 BLACK RED (+) AND BLACK (-) FOR UNGROUNDED SYSTEMS CONVENTION IS L2 RED WIRE AND CONDUCTOR NOTES ADDRESS kW PHOTOVOLTAIC PLANSWHEN LESS THAN 10'-0" OR 10% OF THE CIRCUIT LENGTH; THE LESSER AMPACITY MAY BE USED.USED BEYOND THE POINT OF TRANSITION, A DISTANCE EQUAL TO 10'-0" (3 METERS) OR 10% OF THE CIRCUIT LENGTH FIGURED AT THE HIGHER AMPACITY, WHICHEVER IS LESS. 4. CEC/NEC 310.15(A)(2) (AS APPLICABLE) WHERE TWO DIFFERENT AMPACITIES APPLY TO ADJACENT PORTIONS OF A CIRCUIT, THE HIGHER AMPACITY SHALL BE PERMITTED TO BE AC WIRE AND CONDUIT FILL DERATE CHART [SEE SHEET E-003 FOR THREE LINE DIAGRAM] TAG CIRCUIT ORIGIN CIRCUITDESTINATION CONDUCTORSPECIFICATIONS REQUIRED CONDUCTORAMPACITY CONDUCTOR TEMPERATURE DERATING CONDUIT FILLDERATING CORRECTED AMPACITY CALCULATION AMPACITY CHECK TEMPRATING TRADESIZE AMPACITY PER 310.16 CONT.OPERATION690.8 (B)(1)X =REQUIREDAMPACITY CIRCUITENVIRONMENT AMBIENT TEMP. HGT.ABOVEROOF (in) TEMP.ADDER PER310.15(B)(2)(c) OPERAT. AMPACITYCORRECTION310.15(B)(2)(a) # OFUNGRND.COND. AMPACITYCORRECTION310.15(B)(3)(a) COND.AMPACITY X TEMP.DERATING X CONDUITFILLDERATING =CORRECTEDAMPACITY REQUIREDAMPACITY CORRECTEDAMPACITY AC1 X =X X = AC2 X =X X = AC3 X =X X = AC4 X =X X = AC5 X =X X = AC6 X =X X = AC7 X =X X = AC8 X =X X = AC9 X =X X = AC10 X =X X = #OFCOMBINEDPARALLELCIRCUITS QTY INPARALLEL &MATERIAL QTY INPARALLEL &MATERIAL DESTINATION MAX INV. OUTPUTCURRENT (AMPS)ORCOMPONENT(AMPS) lsc (AMPS)ORCOMPONENT(AMPS) ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ PV MODULE INVERTER (1) CU 90 #12 AWG 30 11.14 1 1.25 1.25 17.4 ROOFTOP 35 >7/8"0 35 0.96 2 N/A 30 0.96 1.0 28.8 17.4 28.8 INVERTER JUNCTION BOX (1) CU 75 #12 AWG 25 1.25 12.1 15.1 ROOFTOP 35 >7/8"0 35 0.94 2 N/A 25 0.94 1.0 23.5 15.1 23.5 AC COMBINER (1) CU 75 #10 AWG 35 1.25 12.1 15.1 ATTIC 35 IN ATTIC 0 35 6 0.8 350.94 0.94 0.8 26.3 15.1 26.3 AC DISCONNECT (1) CU 75 #8 AWG 50 1.25 33.88 42.4 INT/EXT WALL 35 N/A 0 35 0.94 3 1.0 50 0.94 1.0 47.0 42.4 47.0 PRODUCTION METER (1) CU 75 #8 AWG 50 1.25 33.88 42.4 INT/EXT WALL 35 N/A 0 35 0.94 3 1.0 50 0.94 1.0 47.0 42.4 47.0 SMART TRANSFER SWITCH (1) CU #8 AWG 50 1.25 33.88 42.4 INT/EXT WALL 35 N/A 0 JUNCTION BOX AC COMBINER AC DISCONNECT PRODUCTION METER 75 35 0.94 3 1.0 50 0.94 1.0 47.0 42.4 47.0 E-002WIRE COLOR CODING (2020) NEC SECTIONS 250.119 & 200.6 Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMITENERGY STORAGE SYSTEM #2 (1) CU #8 AWG 50 1.25 16 20 EXT WALL 35 N/A 0ENERGY STORAGE SYSTEM #1 75 35 0.94 2 1.0 50 0.94 1.0 47.0 20 47.0 AC DISCONNECT #2 (1) CU #8 AWG 50 1.25 21.3 26.6 EXT WALL 35 N/A 0ENERGY STORAGE SYSTEM #2 75 35 0.94 2 1.0 50 0.94 1.0 47.0 26.6 47.0 SMART TRANSFER SWITCH (1) CU #8 AWG 50 1.25 21.3 26.6 EXT WALL 35 N/A 0AC DISCONNECT #2 75 35 0.94 2 1.0 50 0.94 1.0 47.0 26.6 47.0 NEW SERVICE PANEL (1) CU #6 AWG 65 N/A 50 50 INT/EXT WALL 35 N/A 0SMART TRANSFER SWITCH 75 35 0.94 3 1.0 65 0.94 1.0 61.1 50 61.1 PROTECTED LOADS PANEL (1) CU #6 AWG 65 N/A 50 50 INT/EXT WALL 35 N/A 0SMART TRANSFER SWITCH 75 35 0.94 3 1.0 65 0.94 1.0 61.1 50 61.1 LEGEND RELEASEREVDATE NAME ADDRESSTHREE LINE DIAGRAMEQUIPMENT TABLE QTY COMPONENT 1 PV MODULES 2 MICRO INVERTER 3 AC COMBINER BOX 4 JUNCTION BOX 5 NEW SOLAR LOAD CENTER 9 AC DISCONNECT #2 FOR ESS 7 PROD/GENERATION METER 8 PROTECTED LOADS PANEL 10 11 12 EXISTING UTILITY METER TAG APN ADDRESSBRANCH MODULE QTY OCPD BACK-FEED SOLAR BREAKER: TAG QTY*SIZE TYPE DC1 AC1 AC2 AC3 AC4 AC5 GROUND SIZE TYPE AC6 kW PHOTOVOLTAIC PLANSAC7 AC9 AC10 AC8 6 AC DISCONNECT AT GROUND LEVEL * INCLUDES GROUND & CURRENT CARRYING CONDUCTORS 13 ENERGY STORAGE SYSTEM UNIT#1 14 NOTE: EQUIP TAGS MAY NOT BE IN SEQUENTIAL ORDER, N/A USED DC CONDUCTOR TAG AC CONDUCTOR TAG EQUIPMENT TAG AC# DC# GROUND CONDUCTOR TAGGND ELECTRICAL NOTES SEE SHEET E-001 FOR ADDITIONAL ELECTRICAL SPECIFICATIONS CONDUCTOR TABLE CONDUIT TABLE • •INTEGRATED MICRO INVERTERS (AC MODULES) MUST BE CERTIFIEDUL1742 AND UL1703 COMPLIANT. AS EITHER INDIVIDUAL COMPONENTS OR AC MODULE ASSEMBLY. THEY MUST ALSO BE LABELED "UTILITY INTERACTIVE" CONFORMING TO IEEE1547 TESTING. •PV MODULES THAT HAVE INVERTERS ATTACHED WITHOUT AN ACMODULE EVALUATION BY A NRTL MAY VIOLATE THE ORIGINAL LISTING OF THE PV MODULE AND VOID THE WARRANTY OF THE MODULE. •VERIFY MODULE IS COMPATIBLE WITH MICRO INVERTERMANUFACTURER AND MODEL. •ARTICLE CEC/NEC 690 STILL APPLIES. THE INSTALLER WILL NEED TO CONSIDER REQUIREMENTS SUCH AS: DC GROUND FAULT DETECTION AND INTERRUPT, DC CABLE MANAGEMENT, DC DISCONNECTING MEANS AND DC GROUNDING AS WELL AS THE AC EQUIPMENT GROUNDING CONDUCTOR TO THE INVERTER. BACKFEEDING. NEC INFORMATIONAL NOTE: FUSED DISCONNECTS,UNLESS OTHERWISE MARKED, ARE SUITABLE FOR BACKFEEDING. •690.13(F)(2) DEVICES MARKED WITH "LINE” AND “LOAD” SHALL NOTBE PERMITTED FOR BACKFEED OR REVERSE CURRENT •705.12(B)(5) CIRCUIT BREAKERS BACK FEED FROM UTILITYINTERACTIVE INVERTERS (ANTI-ISLANDING, UL 1741 CERTIFIED) •ALL OVERCURRENT PROTECTION DEVICES (OCPDs) MUST BE RATEDFOR 600 VOLTS ON THE DC / PV POWER SIDE OF THE INVERTER. •ALL CONDUIT AND CONDUIT CONNECTIONS SHALL BE RATED FORWET AND DAMP LOCATIONS WHEN APPLICABLE. INTERCONNECTION NOTES: •705.12(B)(4) CIRCUIT BREAKERS MUST BE SUITABLE FOR N G L2 L1PV N G L2 L1 7 L2 L1 G BUSRATING 3 125A L2L1 G N ENVOY-IQFOR MONITORING GEC N 15A 15A 10A Wi-FiEthernet/Cellular Installed L2 L1 L2 L1 GG NN 6 L2 L1 SMART TRANSFER SWITCH L1 L2 N G 50AN L2 L1 G 40A L1 L2 N G G L1 L2 N G ENPHASE ENCHARGE 10 L2 L1G ENPHASE ENCHARGE 3 AC 1413 AC8 AC9 M 12 G N BUSRATING 11 MAIN C/BRATING GEC 200A 225A 10 AC5 BUSRATING125A 50A CONFIGURED AS MAIN OCPD SHALL BE IN COMPLIANCE WITH NEC 408.36(D) N G L2 L1 L2 L1 GG NN 9 AC10 7 READILY ACCESSIBLE OPEN BLADE AC SYSTEM DISCONNECT VISIBLE FROM APPROACH TO RESIDENCE 60A 240VLOCATED EXTERIOR ON WALL NEAR METER NEMA 3R RATED READILY ACCESSIBLE OPEN BLADEAC SYSTEM DISCONNECT VISIBLE FROM APPROACH TO RESIDENCE 60A 240V LOCATED EXTERIOR ON WALL NEAR METER NEMA 3R RATED 8 AC6 AC4AC3 LOCATED EXTERIOR SOLAR GENERATION (LOAD) BOTTOM LUGS TOTOP LUGS TO UTILITY (LINE) MA SMART GENERATION METER 50A THE BATTERY WILL ONLY BE CHARGED BY PV. THE BATTERY WILL DISCHARGE TO ON SITE LOADS. THE BATTERY DISCHARGES TO THE GRID ONLY IF REQUESTED BY THE GRID VIA CONNECTED SOLUTIONS. NOTE: CONDUCTORS AC3, AC4, AC5, AC6, AC7, AC8, AC9 AND AC10MAY BE THWN-2 OR SER CABLE INVERTER NAMEPLATE RATING 295W/240V MODULE NAMEPLATE RATING 400W (-)(+) (-)(+) ACDC ACDC 2 2 9 MODULES 1 1 10 MODULES (+) (+) 2 2 ACDC(-) (-)DC AC 1 1 DC1 EGC AC1 (-)(+) (-)(+) ACDC AC DC 2 2 9 MODULES 1 1 G G L1 L1 L1 L1 L2 L2 L2 L2 L1 L1 L2 L2 AC2 4 20A ENERGY STORAGE SYSTEM UNIT#2 (2) STRINGS (L1/L2 SHOWN) OF (9) MODULES (1) STRINGS (L1/L2 SHOWN) OF (10) MODULES 28 Q.CELLS Q.PEAK DUO BLK ML-G10+ 400 Enphase IQ7PLUS-72-2-US (240V) Soladeck RSTC 0799-5B Eaton DG222URB MA SMART GENERATION METER 1 10 20A 2 9 15A 120/240V - 1 3 9 15A #12 AWG PV Wire Open Air 50A NO CENTER-FED MAIN BREAKER. PANEL CONFIGURED PER CEC/NEC 705.12(B)(2)(3)(b) 28 1 3 0 1 1 1 1 1 Eaton DG222URB 1 1 2 #6 AWG N/A 3 #12 AWG TRUNK CBL #6 AWG N/A Open Air 7 #10 AWG THWN-2 #8 AWG 3/4 inch EMT 4 #8 AWG THWN-2 #8 AWG 3/4 inch EMT 4 #8 AWG THWN-2 #8 AWG 3/4 inch EMT 4 #8 AWG THWN-2 #8 AWG 3/4 inch EMT 4 #6 AWG THWN-2 #8 AWG 3/4 inch EMT 4 #6 AWG THWN-2 #8 AWG 3/4 inch EMT 3 #8 AWG THWN-2 #8 AWG 3/4 inch EMT 3 #8 AWG THWN-2 #8 AWG 3/4 inch EMT 3 #8 AWG THWN-2 #8 AWG 3/4 inch EMT Enphase X-IQ-AM1-240-3-ES 125A BUS/ MLO E-003SMART TRANSFER SWITCH (N) MAIN SERV PANEL DERATED 225A BUS/200A MB Enphase EP200G101-M240US00 1 ENPHASE ENCHARGE-10-1P-NA ENPHASE ENCHARGE-3-1P-NA1 Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMIT RELEASEREVDATE NAME ADDRESSAPNELECTRICAL SYMBOL LEGEND SECTION 1 PV ARRAY TAGSECTION #MODULE GROUP AC DISCONNECT PERFORMANCE METER UTILITY METER JUNCTION BOX AC P M ELECTRICAL LAYOUTEQUIPMENT GROUNDING 1. METAL PV MODULE FRAMES NEED TO BE CONNECTED TO THE EGC(EQUIPMENT GROUNDING CONDUCTOR). 1.1. WEEBS MAY BE USED IN LIEU OF MODULE GROUND CLAMPSOR LUGS, WITH APPROVAL OF AHJ AND RACKING MFG. WEEBSARE ONE TIME USE ONLY. SEE "we-llc.com" FOR RACKINGSPECIFIC WEEB, INSTALL INSTRUCTIONS, AND UL 2703 CERT. 1.2.FOR "LAY-IN" LUG MODULE GROUNDING; CORRECTHARDWARE OF PROPER METAL MATERIAL TO AVOIDCORROSION MUST BE USED. TYPICALLY DIRECT BURIAL RATED,TINNED, OR STAINLESS STEEL. GROUNDING LUGS MUST BEATTACHED AT MARKED LOCATION ON EACH MODULE. 2. THE EGC (EQUIPMENT GROUNDING CONDUCTOR) IS USED TOBOND ALL NON-CURRENT CARRYING CONDUCTORS AND EXPOSEDMETAL PARTS THAT MIGHT COME INTO CONTACT WITHCURRENT-CARRYING CONDUCTORS, INCLUDING THE FOLLOWING: 2.1. PV MODULES FRAMES, ARRAY MOUNTING RACKING; THEMETAL CHASSIS OF EQUIPMENT SUCH AS INVERTERS,DISCONNECTS, METERS, JUNCTION BOXES AND COMBINERBOXES; AND METAL CONDUIT HOLDING CIRCUITS > 250 VOLTSTO GROUND PER NEC 250.97 3. THE GEC (GROUNDING ELECTRODE CONDUCTOR) IS THECONDUCTOR USED TO CONNECT THE GE OR GE SYSTEM TO THESYSTEM GC, TO THE EGC, OR TO BOTH. 4. THE GE (GROUNDING ELECTRODE) IS A CONDUCTING OBJECT,OFTEN A ROD, RING, OR PLATE ESTABLISHING A DIRECTCONNECTION TO EARTH. THE AC SYSTEM GROUND IS EXISTING,USUALLY AT THE EXISTING MAIN PANEL AND/OR UTILITY METER.THE GROUND CAN ONLY OCCUR IN ONE PLACE AND MUST NOT BEDUPLICATED IN SUB-PANELS OR ANYWHERE ELSE ON AC SIDE. SERVICE PANELSP ADDRESS kW PHOTOVOLTAIC PLANSAUTO TRANSFORMERATF SOLAR LOAD CENTER ENERGY STORAGE SYSTEM SLC AC COMBINERACC ESS PLP PROTECTED LOADS PANEL JB XFMR TRANSFORMER SUB-PANELSUB STS SMART TRANSFER SWITCH CB CIRCUIT BREAKER DISCONNECTMPPLP ACC AC#1ESSAC#2JB JB JB STSSP NORTH SCALE: 1/8” = 1’0” @ SHEET SIZE A3QTY 28 Q.CELLS Q.PEAK DUO BLK ML-G10+ 400, QTY 28 Enphase IQ7PLUS-72-2-US (240V) MICRO INVERTER PV AC DISCONNECT LOCATED ON ACCESSIBLE EXTERIOR WALL WITH EXTERNAL HANDLE VISIBLE, LOCKABLE & LABELED WITHIN 10 FEET OF THE METER E-100Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMIT RELEASEREVDATE NAME ADDRESSAPNSTANDARD PLACARDS ADDRESS kW PHOTOVOLTAIC PLANSSHEET NOTES1SCALE:1/2" = 1'-0"CONDUIT, RACEWAY, J-BOX, AND PULL BOXES 2 3 5 6 8 SCALE:1/4" = 1'-0"9 10 4 1.PLACE ON CONDUIT AND/OR RACE WAYS EVERY 10' (60"), 12" FROM BENDS, 12" ABOVE AND BELOW PENETRATIONS. 2.CODE REFERENCE: NEC 690.31(G)(3)3.MINIMUM OF 1 1/8" x 5 3/4" 4.FONT: 3/8" AND .8 WIDTH FACTOR. 5.REFLECTIVE WHITE LETTERS ON A RED BACKGROUND. J-BOX, DC COMBINER, AND DC DISCONNECT WARNING: ELECTRIC SHOCK HAZARD. THE DC CONDUCTORS OF THIS PHOTOVOLTAIC SYSTEM ARE UNGROUNDED AND MAY BE ENERGIZED SCALE:1/4" = 1'-0" 1.ONLY FOR UNGROUNDED SYSTEMS. 2.PLACED ON ALL ENCLOSURES WITH UNGROUNDED CIRCUITS OR DEVICES WHICH ARE ENERGIZED AND MAY BE EXPOSED DURING SERVICE. 3.MINIMUM OF 3" x 10 1/2" 4.FONT: 3/8" 5.WHITE LETTERS ON A RED BACKGROUND. NON-LOAD BREAK DC COMBINER / J-BOX WARNING: ELECTRIC SHOCK HAZARD DO NOT TOUCH TERMINALS TERMINALS ON BOTH LINE AND LOAD SIDES MAY BE ENERGIZED IN THE OPEN POSITION SCALE:1/2" = 1'-0" 1.PLACED ON DC DISCONNECT(S) AND ON ANY EQUIPMENT THAT STAYS ENERGIZED IN THE OFF POSITION FROM THE PV SUPPLY. 2.CODE REFERENCE: NEC 690.13(B) 3.MINIMUM OF 3 1/2" x 10" 4.FONT: 3/8" 5.WHITE LETTERS ON A RED BACKGROUND. INVERTER(S)SCALE:1/2" = 1'-0" WARNING: ELECTRIC SHOCK HAZARD IF A GROUND FAULT IS INDICATED, NORMALLY GROUNDED CONDUCTORS MAY BE UNGROUNDED AND ENERGIZED 1.A RAPID SHUTDOWN SWITCH SHALL HAVE A LABEL LOCATEDON OR NO MORE THAN 1M (3 FT) FROM THE SWITCH THATINCLUDES THE FOLLOWING: 2. 3. MINIMUM OF 3 1/2" x 10 1/2" 4. FONT: 3/8" WHITE LETTERS ON A RED BACKGROUND. AC AND DC DISCONNECTS PV SYSTEM DISCONNECT 1.PLACE ON ALL AC AND DC DISCONNECTS 2.CODE REFERENCE: NEC 690.13(B) 3.MINIMUM OF 1" x 10 1/2" 4.FONT: 3/8" 5.WHITE LETTERS ON A RED BACKGROUND. SCALE:1/4" = 1'-0"SCALE:1/4" = 1'-0" DC COMBINER BOX 1. 2. USE PLACARD "COMBINER # 1" WHEN MORE THAN 1 DC COMBINER IS USED. NUMBER ACCORDING TO THREE LINE DIAGRAM AND CALCULATIONS. 3. MINIMUM OF 1" x 4" 4. FONT: 3/8" AND .75 TO .8 WIDTH FACTOR WHITE LETTERS ON A RED BACKGROUND. 1.CODE REFERENCE: NEC 690.13(C) 2.USE ON NON-LOAD BREAK RATED DISCONNECTION. 3.MINIMUM OF 1" x 6" 4.FONT: 3/8" AND .8 WIDTH FACTOR 5.WHITE LETTERS ON A RED BACKGROUND. DC DISCONNECTS 1.USE PLACARD ON CUSTOMER GENERATION METER. 2.VERIFY WHICH PLACARD IS REQUIRED WITH AHJ. 3.MINIMUM OF 1" x 4" 4.FONT: 3/8" AND .8 WIDTH FACTOR 5.WHITE LETTERS ON A RED BACKGROUND. SOLAR kWh METER SCALE:1/2" = 1'-0" INVERTER # 1 1.USE PLACARD "INVERTER # 1" WHEN MORE THAN 1 INVERTER IS USED. NUMBER ACCORDING TO THREE LINE DIAGRAM AND CALCULATIONS. 2.MINIMUM OF 1" x 4" 3.FONT: 3/8" 4.WHITE LETTERS ON A RED BACKGROUND. SCALE:1/2" = 1'-0" USE PLACARD "[AC][DC] DISCONNECT # 1" WHEN MORE THAN ONE DISCONNECT IS USED. NUMBER ACCORDING TO THREE LINE DIAGRAM AND CALCULATIONS. 11 SCALE:1/4" = 1'-0"MAIN SERVICE PANEL 1.COMBINATION PLACARDS MAY BE USED IN PLACE OF MULTIPLE PLACARDS FOR THE SAME DEVICE. ALL INFORMATION FROM THE MULTIPLE PLACARDS MUST BE PRESENT. 2.BLACK LETTERS WITH YELLOW BACKGROUND MAY BE USED IN PLACE OF THE STANDARD WHITE LETTERS WITH RED BACKGROUND WITH AHJ APPROVAL. 3.ALL INTERIOR AND EXTERIOR DC CONDUIT, ENCLOSURES, RACEWAYS, CABLE ASSEMBLIES, JUNCTION BOXES, COMBINER BOXES AND DISCONNECTS ARE MARKED. (NEC 690.31[G], NEC 690.13 & 690.53) 4.THE MARKINGS ON THE CONDUITS, RACEWAYS AND CABLE ASSEMBLIES ARE EVERY 10 FEET, WITHIN ONE FOOT OF ALL TURNS OR BENDS AND WITHIN ONE FOOT ABOVE AND BELOW ALL PENETRATIONS OF ROOF/CEILING ASSEMBLIES, WALLS AND BARRIERS. (IFC 605.11.1.4, NEC 690.31[G][3] ) 5.WHERE PV CIRCUITS ARE EMBEDDED IN BUILT-UP, LAMINATE OR MEMBRANE ROOFING MATERIALS IN ROOF AREAS NOT COVERED BY PV MODULES AND ASSOCIATED EQUIPMENT, THE LOCATION OF CIRCUITS SHALL BE CLEARLY MARKED. 6.REQUIRED LABELS SHALL BE PERMANENT AND SUITABLE FOR THE ENVIRONMENT. MATERIALS USED FOR MARKING MUST BE WEATHER RESISTANT. UL STANDARD IS RECOMMENDED TO DETERMINE WEATHER RATING. UL LISTING OF MARKINGS IS NOT REQUIRED. SEE UL LABELING SYSTEM 969 (UL 969) 7.MARKING CONTENT AND FORMAT: 7.1. ARIAL OR SIMILAR FONT, NON-BOLD. 7.2. MINIMUM 3/8" LETTER HEIGHT FOR HEADERS. 7.3. MINIMUM 1/16" LETTER HEIGHT FOR DATA7.4. CONTRASTING BACKGROUND AND LETTERING. 7.5. ALL CAPITAL LETTERS. 7.6. CONTRASTING SPACE BETWEEN ROWS OF TEXT 7.7. DIMENSIONS OF PLACARDS ARE APPROXIMATE. MAY BE REDUCED AND / OR INCREASED TO UL APPROVED MANUFACTURED PRODUCT CODE ABBREVIATIONS:NATIONAL ELECTRICAL CODE (NEC) INTERNATIONAL BUILDING CODE (IBC) INTERNATIONAL RESIDENTIAL CODE (IRC) INTERNATIONAL FIRE CODE (IFC) UNDERWRITERS LABORATORY (UL) DO NOT DISCONNECT UNDER LOAD 7 RAPID SHUTDOWN SWITCH RAPID SHUTDOWN SWITCH FOR SOLAR PV SYSTEM THE LABEL SHALL BE REFLECTIVE WITH ALL LETTERS CAPITALIZEDAND HAVING A MINIMUM HEIGHT OF 9.5 MM (3⁄8 IN.),IN WHITE ON RED BACKGROUND. 2. 1/4" = 1'-0"SCALE: 2 CODE REFERENCE: NEC 690.56(C)(1)(a) 3 TITLE: MIN. 3/8" BLACK CHARACTERS ON YELLOW BACKGROUND, REMAINING CHARACTERS MIN. 3/16" IN BLACK ON WHITE BACKGROUND. 1 LOCATE NO MORE THAN 1 m FROM THE SERVICE DISCONNTMEANS TO WHICH THE PV SYSTEMS ARE CONNECTED ANDSHALL INDICATE THE LOCATION OF ALL IDENTIFIED RAPIDSHUTDOWN SWITCHES IF NOT AT THE SAME LOCATION. SOLAR PV SYSTEM EQUIPPED WITH RAPID SHUTDOWN TURN RAPID SHUTDOWN SWITCH TO THE “OFF” POSITION TO SHUT DOWN PV SYSTEM AND REDUCE SHOCK HAZARD IN THE ARRAY. SOLAR ELECTRIC PV PANELS INVERTER(S)P-001QTY 28 Q.CELLS Q.PEAK DUO BLK ML-G10+ 400, QTY 28 Enphase IQ7PLUS-72-2-US (240V) MICRO INVERTER Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMIT RELEASEREVDATE NAME ADDRESSAPNDYNAMIC PLACARDS ADDRESS kW PHOTOVOLTAIC PLANS1.PRIME CONTRACTOR / PERMIT APPLICANT SIGNER IS RESPONSIBLE FOR THE DESIGN AND SPECIFICATIONS OF THE PHOTOVOLTAIC SYSTEM INSTALLATION. PRIME CONTRACTOR / PERMIT APPLICANT SIGNER WILL BE RESPONSIBLE FOR COLLECTION OF EXISTING ONSITE INFORMATION REQUIREMENTS TO DESIGN, SPECIFY, AND INSTALLTHE EXTERIOR MOUNTED PORTION OF THE PHOTOVOLTAIC SYSTEM DETAILED IN THIS DOCUMENT. 2.ADVANCED SOLAR SOLUTIONS, INC IS RESPONSIBLE FOR APPLYING SUPPLIED INFORMATION INTO A SET OF PERMIT DRAWINGS. ANY CHANGES TO DRAWINGS ARE SUBJECT TO CONTRACT CONDITIONS BETWEEN THE CLIENT AND ADVANCED SOLAR SOLUTIONS, INC. IN ACCORDANCE WITH THE REQUIREMENTS OF THE AHJ. RESPONSIBILITY NOTES SHEET NOTES 1. COMBINATION PLACARDS MAY BE USED IN PLACE OF MULTIPLEPLACARDS FOR THE SAME DEVICE. ALL INFORMATION FROM THE MULTIPLE PLACARDS MUST BE PRESENT. 2. 4. BLACK LETTERS WITH YELLOW BACKGROUND MAY BE USED IN PLACE OF THE STANDARD WHITE LETTERS WITH RED BACKGROUND WITH AHJ APPROVAL. REQUIRED LABELS SHALL BE PERMANENT AND SUITABLE FOR THE ENVIRONMENT. MATERIALS USED FOR MARKING MUST BE WEATHER RESISTANT. UL STANDARD IS RECOMMENDED TO DETERMINE WEATHER RATING. UL LISTING OF MARKINGS IS NOT REQUIRED. SEE UL LABELING SYSTEM 969 (UL 969) 5. MARKING CONTENT AND FORMAT: 5.1. ARIAL OR SIMILAR FONT, NON-BOLD.5.2. MINIMUM 3/8" LETTER HEIGHT FOR HEADERS. 5.3. MINIMUM 1/16" LETTER HEIGHT FOR DATA 5.4. CONTRASTING BACKGROUND AND LETTERING. 5.5. ALL CAPITAL LETTERS.5.6. CONTRASTING SPACE BETWEEN ROWS OF TEXT 5.7. DIMENSIONS OF PLACARDS ARE APPROXIMATE. MAY BEREDUCED AND / OR INCREASED TO UL APPROVED MANUFACTURED PRODUCT 6. ANSI Z535.4 PRODUCT SAFETY SIGNS AND LABELS: THISINFORMATIONAL NOTE AND ITS REQUIREMENTS FOR PLACARDS MAY BE USED WITH PRIOR APPROVAL OF THE AHJ. MOST NOTABLE DIFFERENCES IS COLOR OF PLACARDS AND USE OF HAND WRITTEN VALUES WITH INDUSTRIAL MARKERS ON STANDARD PLACARDS WHERE THE VALUE MAY CHANGE AT A FUTURE DATE. I.E. ADDING MODULES AT A FUTURE DATE, OR STANDARD PLACARD MANUFACTURER INSTALLED ON ELECTRICAL COMPONENT. AHJ APPROVAL REQUIRED. (SEE NOTE #1 FOR INDIVIDUAL PLACARDS) 1 2 3 4 SCALE:1/4" = 1'-0" MAP PLACARD: MAIN SERVICE PANEL AND PV INVERTER (IF NOT SAME LOCATION) SCALE:1/4" = 1'-0"UTILITY METER, SERVICE PANEL, SUB-PANELAC DISCONNECT, AC SUB-PANEL 1.PLACARD PLACED ON EACH SOLAR SYSTEM DISCONNECTING COMPONENT. 2.VALUES MUST MATCH EQUIPMENT CALCULATIONS. SEE SHEET "E-001 / AC DISCONNECT [#]" 3.CODE REFERENCE: NEC 690.54 4.MINIMUM OF 1 1/2" x 8 1/2" (TOP), 1 3/4" x 6 1/2" (BOT) 5.FONT: 3/8" HEADER, 3/16" DATA 6.WHITE LETTERS ON A RED BACKGROUND. AC NORMAL OPERATING VOLTAGE PV SYSTEM AC DISCONNECT RATED AC OUTPUT CURRENT AMPS VOLTS PHOTOVOLTAIC SYSTEM AC DISCONNECT RATED AC OUTPUT CURRENT AC NORMAL OPERATING VOLTAGE AMPS VOLTS WARNING DUAL POWER SOURCES RATED AC OUTPUT CURRENT AC NORMAL OPERATING VOLTAGE AMPS VOLTS 1.(#1) PLACARD PLACED AT MAIN UTILITY SERVICE DISCONNECT/BREAKER AND PV SYSTEM SUPPLY BREAKER AT POINT OF INTERCONNECTION. (#2 & #3) PLACARD(S)REQUIRED WITH #1 PLACARD WHEN UTILITY SERVICE AND PV SYSTEM DISCONNECT ARE NOT LOCATED NEXT TO EACH OTHER. MAP PLACARD REQUIRED AS SPECIFIED. 2.VALUES MUST MATCH EQUIPMENT CALCULATIONS. 2.1. VALUES WILL MATCH LOAD CENTER OR SUB-PANEL VALUES IF INSTALLED AFTER INVERTERS. IF AC CONNECTION TO SERVICE PANEL COMES FROM INVERTERS; SEESHEET "E-001 / STRING INVERTER[#] SPECIFICATIONS".2.1.1. INVERTERS ARE PARALLEL CONNECTIONS.2.1.2. "RATED AC OUTPUT CURRENT" WILL BE THE SUM OF THE INVERTERS 2.1.3. "AC NORMAL OPERATING VOLTAGE" WILL BE THE NAME PLATE RATING OF THEINVERTER 3.CODE REFERENCE: NEC 690.54, NEC 705.12(B)(3) 4.MINIMUM OF 2" x 6 1/2" (#1), VARIES (#2 & #3) 5.FONT: 3/8" HEADER, 3/16" DATA (#1), 1/4" (#2 & #3) 6.WHITE LETTERS ON A RED BACKGROUND. SCALE:1/2" = 1'-0"5 CAUTION WARNING ELECTRIC SHOCK HAZARD - DO NOT TOUCH TERMINALS TERMINALS ON BOTH THE LINE AND LOAD SIDES MAY BE ENERGIZED IN THE OPEN POSITION 1.PLACARD PLACED AT ELECTRICAL SERVICE AND AT THE PV INVERTER AND PV DISCONNECTS IF NOT AT THE SAME LOCATION. 2.MAP PLACARD PROVIDES A DIRECTORY OF THE SERVICE DISCONNECTING MEANS AND PHOTOVOLTAIC SYSTEM DISCONNECTION MEANS. 3.CODE REFERENCE: NEC 690.56(A)(B), 705.10 4.WHITE LETTERS ON A RED BACKGROUND. 5.MINIMUM OF 7 3/4" x 5" 6.FONT: 3/4" "CAUTION", 1/4" "WARNING", 3/16" HEADER, 1/8" DATA AND NOTES 7.PLACARD WILL BE PLACED ADJACENT TO THE MAIN SERVICE DISCONNECT IN A LOCATION CLEARLY VISIBLE FROM WHERE THE DISCONNECT IS OPERATED. (CFC 605.11.1.3 & CRC R331.2.3) MAP PLACARD: MAIN SERVICE PANEL AND PV INVERTER (IF NOT SAME LOCATION)SCALE:1/2" = 1'-0" CAUTION 1.PLACARD PLACED AT ELECTRICAL SERVICE AND AT THE PV INVERTER AND PV DISCONNECTS IF NOT AT THE SAME LOCATION. 2.MAP PLACARD PROVIDES A DIRECTORY OF THE SERVICE DISCONNECTING MEANS AND PHOTOVOLTAIC SYSTEM DISCONNECTION MEANS. 3.CODE REFERENCE: NEC 690.56(A)(B), 705.10 4.WHITE LETTERS ON A RED BACKGROUND. 5.MINIMUM OF 6 1/2" x 6 1/2" 6.FONT: 3/4" "CAUTION", 1/4" HEADER, 1/8" DATA AND NOTES 7.PLACARD WILL BE PLACED ADJACENT TO THE MAIN SERVICE DISCONNECT IN A LOCATION CLEARLY VISIBLE FROM WHERE THE DISCONNECT IS OPERATED. (CFC 605.11.1.3 & CRC R331.2.3) AC COMBINER AC NORMAL OPERATING VOLTAGE PV SYSTEM AC DISCONNECT RATED AC OUTPUT CURRENT AMPS VOLTS PHOTOVOLTAIC SYSTEM AC DISCONNECT RATED AC OUTPUT CURRENT AC NORMAL OPERATING VOLTAGE AMPS VOLTS AC NORMAL OPERATING VOLTAGE PV SYSTEM AC DISCONNECT RATED AC OUTPUT CURRENT AMPS VOLTS PHOTOVOLTAIC SYSTEM AC DISCONNECT RATED AC OUTPUT CURRENT AC NORMAL OPERATING VOLTAGE AMPS VOLTS BUILDING CONTAINS TWO SOURCES OF POWER: UTILITY, SOLAR PV UTILITY SERVICE DISCONNECT LOCATED BELOW. SOLAR PV SYSTEM DISCONNECT LOCATED [N/E/S/W] WALL OF BUILDING BUILDING CONTAINS TWO SOURCES OF POWER: UTILITY, SOLAR PV UTILITY SERVICE DISCONNECT LOCATED BELOW. SOLAR PV SYSTEM DISCONNECT LOCATED [N/E/S/W] WALL OF BUILDING SCALE:1/2" = 1'-0" 1. 2. USE PLACARD "COMBINER # 1" WHEN MORE THAN 1 AC COMBINER IS USED. NUMBER ACCORDING TO THREE LINE DIAGRAM AND CALCULATIONS. 3. MINIMUM OF 1" x 4" 4. FONT: 3/8" AND .75 TO .8 WIDTH FACTOR MINIMUM. 5. WHITE LETTERS ON A RED BACKGROUND. PLACARDS MAY BE COMBINED TOGETHER. I.E. "AC COMBINER BOX #1". MINIMUM REQUIREMENTS LISTED ABOVE. AC COMBINER / DISCONNECT #1 AC SUB-PANEL #1 AC NORMAL OPERATING VOLTAGE PV SYSTEM AC DISCONNECT RATED AC OUTPUT CURRENT AMPS VOLTS PHOTOVOLTAIC SYSTEM AC DISCONNECT RATED AC OUTPUT CURRENT AC NORMAL OPERATING VOLTAGE AMPS VOLTS RATED AC OUTPUT CURRENT AC NORMAL OPERATING VOLTAGE PV SYSTEM AC DISCONNECT AMPS VOLTS PHOTOVOLTAIC SYSTEM AC DISCONNECT RATED AC OUTPUT CURRENT AC NORMAL OPERATING VOLTAGE AMPS VOLTS AC COMBINER / DISCONNECT #2 AC SUB-PANEL #2 AC COMBINER / DISCONNECT #3 #1 #2 #3 CODE ABBREVIATIONS:NATIONAL ELECTRICAL CODE (NEC) INTERNATIONAL BUILDING CODE (IBC) INTERNATIONAL RESIDENTIAL CODE (IRC) INTERNATIONAL FIRE CODE (IFC) UNDERWRITERS LABORATORY (UL) 3.ALL INTERIOR AND EXTERIOR DC CONDUIT, ENCLOSURES, RACEWAYS, CABLE ASSEMBLIES, JUNCTION BOXES, COMBINER BOXES AND DISCONNECTS ARE MARKED. (NEC 690.31[G], NEC 690.53) PROTECTEDLOADS PANEL UTILITY METER &SERVICE PANEL PRODUCTIONMETER AC DISCO SMART TRANSFER SWITCHSOLAR ARRAYON ROOF TOP AC COMBINER ENERGY STORAGESYSTEM PROTECTEDLOADS PANEL UTILITY METER &SERVICE PANEL PRODUCTIONMETER AC DISCO SMART TRANSFER SWITCHSOLAR ARRAYON ROOF TOP AC COMBINER ENERGY STORAGESYSTEM N N 33.88 240 240 33.88 240 33.88 240 33.88 240 33.88240 240 21.3 21.3 P-002Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMIT I M TS I I QE M IE E I M ER E I M EQE M EPP MQTPM I MR EPPE MSR T S I MPI achieving the highest system ef ciency. E S I RT E I - 7 IQ I - ER - M SMR I I MR I E I M I RT E I - R S RT E I - E I ER I RT E I Enlighten™ monitoring and analysis software. - 7I MI M SMR I I I IR I IPME MPM ER E I S T I MS IRI E MSR ER R I S S I E QMPPMSR S S TS I SR I MR IRE PMR RT E I S T S M I ER MR PIE MR warranty of up to 25 years. E I E M M I I 8S PIEVR QSVI EFSYX )RTLEWI S IVMR W MWMX I I SQ E E 7 II E I M M I I I MSR - 7 )EW XS -RWXEPP 0M LX IM LX ERH WMQTPI *EWXIV MRWXEPPEXMSR MXL MQTVS IH PM LXIV X S MVI GEFPMR &YMPX MR VETMH WLYXHS R GSQTPMERX 2) 4VSHYGXM I ERH 6IPMEFPI 3TXMQM IH SV LM L TS IVIH GIPP LEP GIPP ERH GIPP LEP GIPP QSHYPIW 1SVI XLER E QMPPMSR LSYVW S XIWXMR PEWW -- HSYFPI MRWYPEXIH IRGPSWYVI 90 PMWXIH 7QEVX +VMH 6IEH SQTPMIW MXL EH ERGIH VMH WYTTSVX SPXE I ERH VIUYIRG VMHI XLVSY L VIUYMVIQIRXW 6IQSXIP YTHEXIW XS VIWTSRH XS GLER MR VMH VIUYMVIQIRXW • Con gurable for varying grid pro les 1IIXW % 6YPI 90 7% 8LI -5 1MGVS MW VIUYMVIH XS WYTTSVX GIPP LEP GIPP QSHYPIW 2S IR SVGIH ( % VEXMS 7II XLI GSQTEXMFMPMX GEPGYPEXSV EX LXXTW IRTLEWI GSQ IR YW WYTTSVX QSHYPI GSQTEXMFMPMX 2SQMREP SPXE I VER I GER FI I XIRHIH FI SRH RSQMREP M VIUYMVIH F XLI YXMPMX 0MQMXW QE EV 6I IV XS PSGEP VIUYMVIQIRXW XS HI MRI XLI RYQFIV S QMGVSMR IVXIVW TIV FVERGL MR SYV EVIE 8S PIEVR QSVI EFSYX )RTLEWI S IVMR W MWMX I I SQ © 2020 Enphase Energy. All rights reserved. Enphase, the Enphase logo, Enphase IQ 7, Enphase IQ 7+, Enphase IQ Battery, Enphase Enlighten, Enphase IQ Envoy, and other trademarks or service names are the trademarks of Enphase Energy, Inc. Data subject to change. 2020-08-12 -2 ( ( - 7 - 7 7 SQQSRP YWIH QSHYPI TEMVMR Wz ; ; ; ; 1SHYPI GSQTEXMFMPMX GIPP LEP GIPP 4: QSHYPIW SRP GIPP LEP GIPP ERH GIPP LEP GIPP 4: QSHYPIW 1E MQYQ MRTYX ( SPXE I : : 4IEO TS IV XVEGOMR SPXE I : : : : 3TIVEXMR VER I : : : : 1MR 1E WXEVX SPXE I : : : : 1E ( WLSVX GMVGYMX GYVVIRX QSHYPI -WG % % 3 IV SPXE I GPEWW ( TSVX ---- ( TSVX FEGO IIH GYVVIRX % % PV array con guration YR VSYRHIH EVVE 2S EHHMXMSREP ( WMHI TVSXIGXMSR VIUYMVIH % WMHI TVSXIGXMSR VIUYMVIW QE % TIV FVERGL GMVGYMX ( - M VSM IV IV - M VSM IV IV 4IEO SYXTYX TS IV :% :% 1E MQYQ GSRXMRYSYW SYXTYX TS IV :% :% 2SQMREP 0 0 SPXE I VER Is : : : : : : : : 1E MQYQ GSRXMRYSYW SYXTYX GYVVIRX % : % : % : % : 2SQMREP VIUYIRG , , ) XIRHIH VIUYIRG VER I , , % WLSVX GMVGYMX EYPX GYVVIRX S IV G GPIW %VQW %VQW 1E MQYQ YRMXW TIV % 0 0 FVERGL GMVGYMXt :% :% :% :% 3 IV SPXE I GPEWW % TSVX ------ % TSVX FEGO IIH GYVVIRX Q% Q% 4S IV EGXSV WIXXMR 4S IV EGXSV EHNYWXEFPI PIEHMR PE MR PIEHMR PE MR ) - -)2 Peak ef ciency CEC weighted ef ciency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kW PHOTOVOLTAIC PLANSINVERTER CUT SHEET R-101Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMIT RELEASEREVDATE NAME ADDRESSAPNEQUIP. CUT SHEETS ADDRESS kW PHOTOVOLTAIC PLANS8 I E E E S I S T I W S E I W W I W E E E E - W S T WI S II EWI E I W S E I W EW E S E WE I I I ETE S E I I I I I S S I I W TS I E - T S IW E T ETE E W E I W E IW I W W I W I S II I needs of both new and retro t solar customers. E E 8S PIEVR QSVI EFS X )RTLEWI S IVMR W MWMX IRTLEWI S E E II E S E 6IPMEFPI 4VS IR LM L VIPMEFMPMX -5 7IVMIW 1MGVSMR IVXIVW 8IR IEV PMQMXIH EVVERX 8LVII MRHITIRHIRX )RGLEV I WXSVE I FEWI RMXW 8 IP I IQFIHHIH -5 %8 1MGVSMR IVXIVW 4EWWM I GSSPMR RS QS MR TEVXW ERW 7QEVX VMH SVQMR GETEFMPMX SV FEGO T STIVEXMSR • Remote software and rmware upgrade 1SFMPI ETT FEWIH QSRMXSVMR ERH GSRXVSP 7 TTSVX SV WIP GSRW QTXMSR 9XMPMX XMQI S WI 839 STXMQM EXMSR 7MQTPI PP MRXI VEXIH % FEXXIV W WXIQ 5 MGO ERH IEW TP ERH TPE MRWXEPPEXMSR -RXIVGSRRIGXW MXL WXERHEVH LS WILSPH % MVMR 7E I IPPW WE IX XIWXIH 0MXLM Q MVSR TLSWTLEXI 0 4 GLIQMWXV SV QE MQ Q WE IX ERH PSR I MX ()0 2 ) )2 ,%6 ) 4 2%)RGLEV I FEXXIV WXSVE I W WXIQ MXL MRXI VEXIH )RTLEWI 1MGVSMR IVXIVW ERH FEXXIV QERE IQIRX RMX 19 -RGP HIW 8LVII )RGLEV I O;L FEWI RMXW % 97 3RI )RGLEV I GS IV OMX MXL GS IV EPP QS RXMR FVEGOIX EXIVXM LX GSRH MX L FW ERH MRXIVGSRRIGX OMX SV MVMR FIX IIR FEXXIVMIW 3 ) ) )2 ,%6 ) ,2(0 6 3RI WIX S )RGLEV I FEWI RMX MRWXEPPEXMSR LERHPIW 4 6EXIH GSRXMR S W S XT X TS IVs O:% 4IEO S XT X TS IV O:% WIGSRHW 2SQMREP SPXE I VER I :% 2SQMREP VIU IRG VER I , 6EXIH S XT X G VVIRX % 4IEO S XT X G VVIRX % WIGSRHW 4S IV EGXSV EHN WXEFPI PIEHMR PE MR 1E MQ Q RMXW TIV % FVERGL GMVG MX RMX WMR PI TLEWI -RXIVGSRRIGXMSR 7MR PI TLEWI 1E MQ Q % WLSVX GMVG MX E PX G VVIRX S IV G GPIW %VQW Round trip ef ciency² ) 8SXEP GETEGMX O;L 9WEFPI GETEGMX O;L Round trip ef ciency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t GETEGMX T XS IEVW SV G GPIW 7 TTSVXIH MR FEGO T S VMH STIVEXMSRW % XS EXXIV XS % EX TS IV VEXMR 3. Whichever occurs rst. Restrictions apply. E E 8S PIEVR QSVI EFS X )RTLEWI S IVMR W MWMX IRTLEWI S k T EWI I W IWI I T EWI I T EWI S S E I E S I E I E W S WI I E IW E I I E I E W S T EWI I - E E W I S E I ENERGY STORAGE SYSTEM #1 CUT SHEET R-102Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMIT 8 I E E E S I S T I W S E I W W I W E E E E - EW E S E WE I I I ETE S E IW S I I I S S I I W TS I E - T S IW E T ETE E W E I W E IW I W W I W I S II I needs of both new and retro t solar customers. E E 8S PIEVR QSVI EFS X )RTLEWI S IVMR W MWMX IRTLEWI S E E II E S E 6IPMEFPI 4VS IR LM L VIPMEFMPMX -5 7IVMIW 1MGVSMR IVXIVW 8IR IEV PMQMXIH EVVERX S V IQFIHHIH -5 %8 1MGVSMR IVXIVW 4EWWM I GSSPMR RS QS MR TEVXW ERW 7QEVX VMH SVQMR GETEFMPMX SV FEGO T STIVEXMSR • Remote software and rmware upgrade 1SFMPI ETT FEWIH QSRMXSVMR ERH GSRXVSP 7 TTSVX SV WIP GSRW QTXMSR 9XMPMX XMQI S WI 839 STXMQM EXMSR 7MQTPI PP MRXI VEXIH % FEXXIV W WXIQ 5 MGO ERH IEW TP ERH TPE MRWXEPPEXMSR -RXIVGSRRIGXW MXL WXERHEVH LS WILSPH % MVMR 7E I EXXIV WE IX XIWXIH 0MXLM Q MVSR TLSWTLEXI 0 4 GLIQMWXV SV QE MQ Q WE IX ERH PSR I MX ()0 2 ) )2 ,%6 ) 4 2%)RGLEV I FEXXIV WXSVE I W WXIQ MXL MRXI VEXIH )RTLEWI 1MGVSMR IVXIVW ERH FEXXIV QERE IQIRX RMX 19 -RGP HIW 3RI )RGLEV I O;L FEWI RMX % 97 3RI )RGLEV I GS IV OMX MXL GS IV ERH EPP QS RXMR FVEGOIX 3 ) ) )2 ,%6 ) ,2(0 6 3RI WIX S )RGLEV I FEWI RMX MRWXEPPEXMSR LERHPIW 4 6EXIH GSRXMR S W S XT X TS IV O:% 4IEO S XT X TS IV O:% WIGSRHW 2SQMREP SPXE I VER I :% 2SQMREP VIU IRG VER I , 6EXIH S XT X G VVIRX % 4IEO S XT X G VVIRX % WIGSRHW 4S IV EGXSV EHN WXEFPI PIEHMR PE MR 1E MQ Q RMXW TIV % FVERGL GMVG MX 8LVII RMXW WMR PI TLEWI -RXIVGSRRIGXMSR 7MR PI TLEWI 1E MQ Q % WLSVX GMVG MX E PX G VVIRX S IV G GPIW %VQW Round trip ef ciency² ) 8SXEP GETEGMX O;L 9WEFPI GETEGMX O;L Round trip ef ciency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t GETEGMX T XS IEVW SV G GPIW 7 TTSVXIH MR FEGO T S VMH STIVEXMSR % XS FEXXIV XS % EX TS IV VEXMR 3. Whichever occurs rst. Restrictions apply. E E 8S PIEVR QSVI EFS X )RTLEWI S IVMR W MWMX IRTLEWI S k T EWI I W IWI I T EWI I T EWI S S E I E S I E I E W S WI I E IW E I I E I E W S T EWI I - E E W I S E I RELEASEREVDATE NAME ADDRESSAPNEQUIP. CUT SHEETS ADDRESS kW PHOTOVOLTAIC PLANSENERGY STORAGE SYSTEM #2 CUT SHEET R-103Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMIT I E EV M S I I S I S VM TS IV I ) EV I SVE I I E SPEV - TVS M I M VS VM M IV S I MS I M I 1-( MS EPM E S E M EPP I I M E IE PI P VE M MS M I S I I IV I VS VM TS IV S E T TS IV M I I I S E VM EMP VI - S SPM E I M IV S I MS I MT I M S E M PI I PS VI E VIE PM I VM M ITI I ETE MPM MI S E SVE I M EPPE MS TVS M M E S M I TVI MVI SP MS SV VI M I MEP ETTPM E MS E 8S PIEVR SVI EFS X )RTLEWI S IVMRKW MWMX IRTLEWI S (E E II E I IV E E I I I 6IPMEFPI ( VEFPI 2)1% X TI 6 IRGPSW VI 8IR IEV PM MXIH EVVERX 7 EVX SRXVSPW WE I GSRRIGXM MX XS XLI KVMH % XS EXMGEPP HIXIGXW KVMH S XEKIW 4VS MHIW WIE PIWW XVERWMXMSR XS FEGO T 7M TPI SRRIGXW XS XLI PSEH SV WIV MGI IU MT IRXz WMHI S XLI EMR PSEH TERIP IRXIVIH S RXMRK FVEGOIXW W TTSVX WMRKPI WX H S RXMRK 7 TTSVXW GSRH MX IRXV VS XLI FSXXS FSXXS PI X WMHI ERH FSXXS VMKLX WMHI 7 TTSVXW LSPI LS I ERH TEVXMEP LS I FEGO T ERH W FTERIP FEGO T 9T XS % EMR FVIEOIV W TTSVX -RGP HIW RI XVEP SV MRK XVERW SV IV SV WTPMX TLEWI : FEGO T STIVEXMSR )RTS IV MW RSX W MXEFPI SV WI EW WIV MGI IU MT IRX MR EREHE 8S PIEVR SVI EFS X )RTLEWI S IVMRKW MWMX IRTLEWI S k ) T E I ) IV PP VM VI IV I ) T E I I ) T E I PS S ) TS IV E S IV VE I EV SV IV M I E I EVI I VE I EV S ) T E I ) IV - (E E I S E I )4 + 1 97 )RTLEWI )RTS IV W EVX W MXGL MXL RI XVEP SV MRK XVERW SV IV 2 8 1MGVSKVMH -RXIVGSRRIGX (I MGI 1-( FVIEOIVW ERH WGVI W 7XVIE PMRIW KVMH MRHITIRHIRX GETEFMPMXMIW S 4: ERH WXSVEKI MRWXEPPEXMSRW ERH % ) 4 % )27 6ITPEGI IRX )RTS IV GSRXVSPPIV TVMRXIH GMVG MX FSEVH MVG MX FVIEOIVW EW RIIHIH 6/ % 4 : 6/ % 4 : 6/ % 4 : 6/ % 4 : 6/ % 4 : 6/ % 4 : 6/ % 4 : 6/ % 4 : 6/ % 4 : 6/ % 4 : 2SX MRGP HIH WX SVHIV WITEVEXIP 1EMR FVIEOIV TSPI % O%- 76 2 SV 76 1EMR FVIEOIV TSPI % O%- 76 2 1EMR FVIEOIV TSPI % O%- 76 2 1EMR FVIEOIV TSPI % O%- 76 2 1EMR FVIEOIV TSPI % O%- 76 2 MVG MX FVIEOIV TSPI % O%- 6 MVG MX FVIEOIV TSPI % O%- 6 MVG MX FVIEOIV TSPI % O%- 6 MVG MX FVIEOIV TSPI % O%- 6 MVG MX FVIEOIV TSPI % O%- 6 )4 + ,2(0 6 )RTS IV MRWXEPPEXMSR LERHPI OMX SVHIV WITEVEXIP %WWI FP VEXMRK SRXMR S W STIVEXMSR EX S MXW VEXMRK 2S MREP SPXEKI VERKI 0 0 :% :% :SPXEKI IEW VI IRX EGG VEG r : RS MREP r : 0 2 ERH r : 0 0 2S MREP VIU IRG VERKI , , VIU IRG IEW VI IRX EGG VEG r , 1E M GSRXMR S W G VVIRX VEXMRK % 1E M S XT X S IVG VVIRX TVSXIGXMSR HI MGI % 1E M MRT X S IVG VVIRX TVSXIGXMSR HI MGI % 1E M S IVG VVIRX TVSXIGXMSR HI MGI VEXMRK SV WXSVEKI FVERGL GMVG MX % 1E M S IVG VVIRX TVSXIGXMSR HI MGI VEXMRK SV 4: GS FMRIV FVERGL GMVG MX % 2I XVEP SV MRK 8VERW SV IV 2 8 VIEOIV VEXMRK TVI MRWXEPPIH % FIX IIR 0 ERH 2I XVEP % FIX IIR 0 ERH 2I XVEP SRXMR S W VEXIH TS IV :% 1E M GSRXMR S W RFEPERGI G VVIRX % : 4IEO VEXIH TS IV :% SV WIGSRHW 4IEO RFEPERGIH G VVIRX % : SV WIGSRHW (M IRWMSRW ; , ( G G G MR MR MR ;IMKLX OK PFW % FMIRX XI TIVEX VI VERKI XS XS SSPMRK 2EX VEP GSR IGXMSR TP W LIEX WLMIPH )RGPSW VI IR MVSR IRXEP VEXMRK 3 XHSSV 2)1% X TI 6 TSP GEVFSREXI GSRWXV GXMSR %PXMX HI 8S IXIVW IIX SRRIGXMSRW 1EMR P KW FEGO T PSEH P KW ERH 76 FVIEOIVW 6 FVIEOIVW MVI TVS MHIH % GS FMRIV P KW )RGLEVKI P KW ERH KIRIVEXSV VIWIV IH SV X VI WI P KW 2I XVEP PEVKI P KW %0 %;+ / 1-0 %;+ %;+ %;+ %0 %;+ / 1-0 2I XVEP ERH KVS RH FEVW 0EVKI LSPIW 92 7 EPP LSPIW 92 %;+ %;+ %;+ %;+ S TPMERGI 90 90 7% 90 90 %5 90 5 90 5, 90 )5 7% 2S 6 4EVX PEWW - )7 % S TEXMFPI MXL 6,(/ ,SPH (S R /MX XS GS TP MXL 2) ) SV FEGO IH GMVG MX FVIEOIVW 8LI O%- S )RTS IV MW XLI WE I EW XLI O%- S XLI EMR FVIEOIV FIMRK MRWXEPPIH EW PMWXIH 2SX MRGP HIH -RWXEPPIV WX TVS MHI TVSTIVP VEXIH FVIEOIV TIV GMVG MX FVIEOIV PMWX EFS I 7IGXMSRW VS XLIWI WXERHEVHW IVI WIH H VMRK XLI WE IX I EP EXMSR ERH MRGP HIH MR XLI 90 PMWXMRK E RELEASEREVDATE NAME ADDRESSAPNEQUIP. CUT SHEETS ADDRESS kW PHOTOVOLTAIC PLANSSMART TRANSFER SWITCH CUT SHEET R-104Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMIT snapnrack.com Ultra Rail Industry leading Wire Management Solutions Single Tool Installation Mounts available for all roof types All SnapNrack Module Clamps & Accessories are compatible with both raiil profi les Start Installing Ultra Rail Today UR-40 UR-60 The Ultimate Value in Rooftop Solar Solar Mounting Solutions © 2016 by SnapNrack Solar Mounting Solutions. All rights reserved 877-732-2860 www.snapnrack.com contact@snapnrack.com SnapNrack_Ultra Rail Sales Brochure_v.1.4 SnapNrack Solar Mounting Solutions are engineered to optimize material use and labor resources and improve overall installation quality and safety. Quality. Innovative. Superior. Unparalleled Wire Management • Open rail channel provides room for running wires resulting in a long-lasting quality install • Industry best wire management o ering includes Junction Boxes, Universal Wire Clamps, MLPE Attachment Kits, and Conduit Clamps • System is fully bonded and listed to UL 2703 Standard © 2019 by SnapNrack Solar Mounting Solutions. All rights reserved 877-732-2860 www.snapnrack.com contact@snapnrack.com SnapNrack Ultra Rail System A sleek, straightforward rail solution for mounting solar modules on all roof types. Ultra Rail features two rail profi les; UR-40 is a lightweight rail profi le that is suitable for most geographic regions and maintains all the great features of SnapNrack rail, while UR-60 is a heavier duty rail profi le that provides a larger rail channel and increased span capabilities. Both are compatible with all existing mounts, module clamps, and accessories for ease of install. The Entire System is a Snap to Install • New Ultra Rail Mounts include snap-in brackets for attaching rail • Compatible with all the SnapNrack Mid Clamps and End Clamps customers love • Universal End Clamps and snap-in End Caps provide a clean look to the array edge Heavy Duty UR-60 Rail • UR-60 rail profi le provides increased span capabilities for high wind speeds and snow loads • Taller, stronger rail profi le includes profi le- specifi c rail splice and end cap • All existing mounts, module clamps, and accessories are retained for the same great install experience RELEASEREVDATE NAME ADDRESSAPNEQUIP. CUT SHEETS ADDRESS kW PHOTOVOLTAIC PLANSRACKING & RAIL CUT SHEET R-105Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMIT DESCRIPTION: PART NUMBER(S): DRAWN BY: SNAPNRACK, UR-40 RAIL 232-02449, 232-02450, 232-02451 mwatkins Solar Mounting Solutions THE INFORMATION IN THIS DRAWING IS CONFIDENTIAL AND PROPRIETARY. ANYREPRODUCTION, DISCLOSURE, OR USE THEREOF IS PROHIBITED WITHOUT THEWRITTEN CONSENT OF SUNRUN SOUTH LLC. 595 MARKET STREET, 29TH FLOOR ● SAN FRANCISCO, CA 94105 USAPHONE (415) 580-6900 ● FAX (415) 580-6902B REVISION: MATERIALS: DESIGN LOAD (LBS): ULTIMATE LOAD (LBS): TORQUE SPECIFICATION: CERTIFICATION: WEIGHT (LBS): 6000 SERIES ALUMINUM N/A N/A N/A LB-FT UL 2703, FILE E359313 5.85 OPTIONS: CLEAR / BLACK ANODIZED MILL FINISH BUNDLES OF 144 BOXES OF 8 ALL DIMENSIONS IN INCHES UR-40 RAIL PROPERTIES SKU FINISH232-02449 MILL 232-02450 CLEAR 232-02451 BLACK 1.624 1.500 CENTROID .750 .832 .792 SECTION PROPERTIES A 0.357 in² Ixx 0.125 in⁴ Iyy 0.132 in⁴ Sx (TOP)0.150 in³ Sx (BOT)0.158 in³ Sy (LEFT)0.175 in³ Sy (RIGHT)0.175 in³ DESCRIPTION: PART NUMBER(S): DRAWN BY: SNAPNRACK, UR-40 SPLICE 242-01213, 242-01214 mwatkins Solar Mounting Solutions THE INFORMATION IN THIS DRAWING IS CONFIDENTIAL AND PROPRIETARY. ANYREPRODUCTION, DISCLOSURE, OR USE THEREOF IS PROHIBITED WITHOUT THEWRITTEN CONSENT OF SUNRUN SOUTH LLC. 595 MARKET STREET, 29TH FLOOR ● SAN FRANCISCO, CA 94105 USAPHONE (415) 580-6900 ● FAX (415) 580-6902A REVISION: MATERIALS: DESIGN LOAD (LBS): ULTIMATE LOAD (LBS): TORQUE SPECIFICATION: CERTIFICATION: WEIGHT (LBS): 6000 SERIES ALUMINUM, STAINLESS STEEL N/A N/A 12 LB-FT UL 2703, FILE E359313 0.52 OPTIONS: CLEAR / BLACK ANODIZED PARTS LIST DESCRIPTIONQTYITEM SNAPNRACK, UR-40 SPLICE TAPPED PRC, CLEAR11 SNAPNRACK, UR-40 SPLICE THRU PRC, CLEAR12 SNAPNRACK, SNAPLINK BONDING CLIP, TYPE 2, STEEL23 BOLT, FLANGE, SERRATED, 5/16IN-18 X 1-3/4IN, SS14 1 2 4 3 RELEASEREVDATE NAME ADDRESSAPNEQUIP. CUT SHEETS ADDRESS kW PHOTOVOLTAIC PLANSRACKING & RAIL CUT SHEET R-106Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMIT DESCRIPTION: PART NUMBER(S): DRAWN BY: SNAPNRACK, UR-60 RAIL 232-02481, 232-02482, 232-02483 mwatkins Solar Mounting Solutions THE INFORMATION IN THIS DRAWING IS CONFIDENTIAL AND PROPRIETARY. ANYREPRODUCTION, DISCLOSURE, OR USE THEREOF IS PROHIBITED WITHOUT THEWRITTEN CONSENT OF SUNRUN SOUTH LLC. 595 MARKET STREET, 29TH FLOOR ● SAN FRANCISCO, CA 94105 USAPHONE (415) 580-6900 ● FAX (415) 580-6902A REVISION: MATERIALS: DESIGN LOAD (LBS): ULTIMATE LOAD (LBS): TORQUE SPECIFICATION: CERTIFICATION: WEIGHT (LBS): 6000 SERIES ALUMINUM N/A N/A N/A LB-FT UL 2703, FILE E359313 8.46 OPTIONS: CLEAR / BLACK ANODIZED MILL FINISH BUNDLES OF 120 BOXES OF 8 ALL DIMENSIONS IN INCHES UR-60 RAIL PROPERTIES SKU FINISH232-02481 MILL232-02482 CLEAR 232-02483 BLACK CENTROID .750 1.211 1.039 SECTION PROPERTIES A 0.515 in² Ixx 0.327 in⁴ Iyy 0.181 in⁴ Sx (TOP)0.270 in³ Sx (BOT)0.315 in³ Sy (LEFT)0.242 in³ Sy (RIGHT)0.242 in³ 2.250 1.500 DESCRIPTION: PART NUMBER(S): DRAWN BY: SNAPNRACK, UR-60 SPLICE 242-01270, 242-01271 mwatkins Solar Mounting Solutions THE INFORMATION IN THIS DRAWING IS CONFIDENTIAL AND PROPRIETARY. ANYREPRODUCTION, DISCLOSURE, OR USE THEREOF IS PROHIBITED WITHOUT THEWRITTEN CONSENT OF SUNRUN SOUTH LLC. 595 MARKET STREET, 29TH FLOOR ● SAN FRANCISCO, CA 94105 USAPHONE (415) 580-6900 ● FAX (415) 580-6902B REVISION: MATERIALS: DESIGN LOAD (LBS): ULTIMATE LOAD (LBS): TORQUE SPECIFICATION: CERTIFICATION: WEIGHT (LBS): 6000 SERIES ALUMINUM, STAINLESS STEEL FULL UR-60 RAIL CAPACITY N/A 12 LB-FT UL 2703, FILE E359313 0.71 OPTIONS: CLEAR / BLACK ANODIZED PARTS LIST DESCRIPTIONQTYITEM BOLT, FLANGE, 5/16IN-18 X 3/4IN, CLEAR, SS11 SNAPNRACK, UR-60 SPLICE, SLEEVE, CLEAR / BLACK12 SNAPNRACK, O-RING13 SNAPNRACK, UR-60 SPLICE, BONDING BRIDGE14 1 4 3 2 RELEASEREVDATE NAME ADDRESSAPNEQUIP. CUT SHEETS ADDRESS kW PHOTOVOLTAIC PLANSRACKING & RAIL CUT SHEET R-107Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMIT snapnrack.com 51 System Bonding Methods Grounding Specifications RAIL CHANNEL NUT MODULEFRAME MID CLAMP ASSEMBLY SS BONDING PIN NOTE: SnapNrack Mid Clamp SnapNrack Adjustable End Clamp SnapNrack UR-40 Rail Splice SnapNrack UR-60 Rail Splice q SnapNrack module clamps contain a SnapNrack Channel Nut with integral bonding clips or pins in assembly to properly bond the system (except Universal End Clamps). Note: SnapNrack Ground Lug Assembly SNAPNRACKULTRA SERIES RAIL 5/16"-18 X 1" BOLT S.S.WITH SPLIT LOCK WASHER S.S. SNAPNRACK GROUNDLUG, 6-12 AWG SNAPNRACK BONDING CHANNEL NUT COPPER WIRE, TYP. SS BONDING CLIP(2 TOTAL)RAIL SPLICEASSEMBLY SnapNrack Ultra Rail Splices contain integral bonding clips in assembly to properly bond the system. Note: RAIL SPLICEASSEMBLY SS BONDING PIN(2 TOTAL) snapnrack.com 52 Grounding Specifications Ground Path Details Ilsco Lay-in Lug Assembly SNAPNRACKULTRA SERIES RAIL #10 BOLT SS ILSCO GBL-4DBT GROUND LUG #10 NUT SSWITH STAR WASHER COPPER WIRE, TYP. GROUND PATH RAIL RAIL SPLICE GROUND LUG EQUIPMENT GROUNDING CONDUCTOR M M M M M M M M X X U U U U U U X X U U TO EGC MOUNT M MODULE CLAMP M = MIDCLAMP X = X-END CLAMPU = UNIVERSAL END CLAMP TO EGC RELEASEREVDATE NAME ADDRESSAPNEQUIP. CUT SHEETS ADDRESS kW PHOTOVOLTAIC PLANSRACKING & RAIL CUT SHEET R-108Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMIT snapnrack.com 53 Grounding Specifications GROUND PATH RAIL RAIL SPLICE GROUND LUG EQUIPMENT GROUNDINGCONDUCTOR M M M M M M M M X X U U U U U U X X U U TO EGC MOUNT M MODULE CLAMPM = MIDCLAMPX = X-END CLAMP U = UNIVERSAL END CLAMP ENPHASEMICRO-INVERTER GROUND PATH RAIL RAIL SPLICE GROUND LUG EQUIPMENT GROUNDINGCONDUCTOR M M M M M M M M X X U U U U U U X X U U MOUNT M MODULE CLAMPM = MIDCLAMPX = X-END CLAMPU = UNIVERSAL END CLAMP SOLAREDGEOPTIMIZER TO EGC TO EGC Ground Path Details - Enphase Ground Path Details - SolarEdge snapnrack.com 54 INSTALLATION INSTRUCTIONS - SNAPNRACK GROUND LUG 1) Snap the SnapNrack Ground Lug into the rail channel on one rail per module row. 2) Place grounding conductor into slot underneath split ring washer. SnapNrack Ground Lug may be used in side or top channel, and may be rotated 90 degrees relative to slot to facilitate running copper across top of rails. Install Note: SnapNrack Ground Lug only Listed for use with 6-12 AWG solid copper conductor. Install Note: 3) Tighten hardware to 16 ft-lbs. Grounding Specifications INSTALLATION INSTRUCTIONS - ILSCO LAY-IN LUG 1) Drill and deburr a 1/4” hole in the back side of the rail for the Ilsco lug to attach to, place the bolt through the hole, and attach the lug assembly on one rail per module row. 2) Place grounding conductor into slot. Torque rail connection to 35 in-lbs. Install Note: Torque set screw to 20 in-lbs for #10- #14 solid and stranded copper, 25 in-lbs for #8 stranded copper, and 35 in-lbs for #4-#6 stranded copper. Install Note: 3) Tighten set screw per Ilsco’s recommendation (see below). • System has been evaluated to a maximum overcurrent device (OCD) protection level of 20 Amps. • Universal End Clamp (UEC) does not bond module to rail. Be sure to separately ground any modules that are only secured by UECs, especially during servicing. • SnapNrack recommends that bare copper never come into contact with aluminum. • SnapNrack Ground Lug: torque bolt to 16 ft-lbs. The Ground Lug may be used in side or top channel. It may be rotated 90 degrees relative to slot to facilitate running copper across top of rails. • Grounding with a standard Ilsco GBL-4DBT Lug is a listed alternate and requires drilling of a hole in the rail.• Ilsco hardware connection to rail: 5 ft-lbs. Torque for lug set screw: #10-#14 solid and stranded copper- 20 in-lbs, #8 stranded copper- 25 in-lbs, #4-#6 stranded copper- 35 in-lbs. Note:RELEASEREVDATE NAME ADDRESSAPNEQUIP. CUT SHEETS ADDRESS kW PHOTOVOLTAIC PLANSRACKING & RAIL CUT SHEET R-109Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMIT snapnrack.com 55 Ground Path Details - DynoBond Grounding Specifications GROUND PATH RAIL RAIL SPLICE GROUND LUG EQUIPMENT GROUNDING CONDUCTOR(+)(-)(+)(-)(+)(-)(+)(-)(+)(-)(+)(-)(+)(-)M M M M M M M M E E TO EGC MOUNT M MODULE CLAMPM = MIDCLAMP E = END CLAMP(+)(-)E E M M M M E E E E DYNORAXX DYNOBOND R/C (QIMS2), DynoRaxx (E357716) photovoltaic bonding jumper cat. no. DynoBond is an optional component that may be used with this system. The DynoBond jumper has been evaluated to provide module to module bonding. The DynoBond device attaches to the frame flange of adjacent modules. 1/953 RELEASEREVDATE NAME ADDRESSAPNEQUIP. CUT SHEETS ADDRESS kW PHOTOVOLTAIC PLANSRACKING & RAIL CUT SHEET R-110Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMIT SnapNrack 775 Fiero Lane, Ste. 200 San Luis Obispo, CA 93401 TEL: (877) 732-2860 Attn.: SnapNrack - Engineering Department Subject: Engineering Certification for the State of Massachusetts Building Codes:1.ASCE/SEI 7-10, Minimum Design Loads for Buildings and Other Structures, by American Society of Civil Engineers 2.2015 International Building Code, by International Code Council, Inc. 3.2015 International Residential Code, by International Code Council, Inc. 4.AC428, Acceptance Criteria for Modular Framing Systems Used to Support Photovoltaic (PV) Panels, November 1, 2012 by ICC-ES 5.Aluminum Design Manual 2015, by The Aluminum Association, Inc. 6.ANSI/AWC NDS-2015, National Design Specification for Wood Construction, by the American Wood Council Design Criteria:Risk Category II Seismic Design Category = A - E Basic Wind Speed (ultimate) per ASCE 7-10: up to 190 mph Ground Snow Load = 0 to 120 (psf) This letter certifies that the loading criteria and design basis for the SnapNrack Ultra Rail Racking System with UR-40 Rail Span Tables are in compliance with the above codes. If you have any questions on the above, do not hesitate to call. Prepared by: PZSE, Inc. – Structural Engineers Roseville, CA August 6, 2019 PZSE, Inc. – Structural Engineers has provided engineering and span tables for the SnapNrack Ultra Rail Racking System with UR- 40 Rail, as presented in PZSE Report # 2017-03227.11, "Engineering Certification and Span Tables for the SnapNrack Ultra Rail Solar Photovoltaic Racking System". All information, data, and analysis therein are based on, and comply with, the following building codes and typical specifications: Re: Report # 2017-03227.11 – SnapNrack Ultra Rail Solar Photovoltaic Racking System with UR-40 Rail RELEASEREVDATE NAME ADDRESSAPNEQUIP. CUT SHEETS ADDRESS kW PHOTOVOLTAIC PLANSRACKING & RAIL CUT SHEET R-111Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMIT DESCRIPTION: PART NUMBER(S): DRAWN BY: SNAPNRACK, ULTRA RAIL COMP KIT SEE BELOW mwatkins Solar Mounting Solutions THE INFORMATION IN THIS DRAWING IS CONFIDENTIAL AND PROPRIETARY. ANYREPRODUCTION, DISCLOSURE, OR USE THEREOF IS PROHIBITED WITHOUT THEWRITTEN CONSENT OF SUNRUN SOUTH LLC. 595 MARKET STREET, 29TH FLOOR ● SAN FRANCISCO, CA 94105 USAPHONE (415) 580-6900 ● FAX (415) 580-6902B REVISION: MATERIALS: DESIGN LOAD (LBS): ULTIMATE LOAD (LBS): TORQUE SPECIFICATION: CERTIFICATION: WEIGHT (LBS): 6000 SERIES ALUMINUM, STAINLESS STEEL, RUBBER 405 UP, 788 DOWN, 236 SIDE 2006 UP, 4000 DOWN, 1070 SIDE 12 LB-FT UL 2703, FILE E359313 0.80 PARTS LIST DESCRIPTIONPART NUMBERQTYITEM SNAPNRACK, UMBRELLA LAG, TYPE 3, 4IN, SS242-9226611 SNAPNRACK, ULTRA FOOT FOR U FLASHING, SILVER / BLACK242-01219, 242-0122012 SNAPNRACK, COMP FLASHING, 9IN X 12IN, SILVER / BLACK ALUM232-01375, 232-0137613 3 1 2 2 DESCRIPTION: PART NUMBER(S): DRAWN BY: SNAPNRACK, ULTRA RAIL COMP KIT SEE BELOW mwatkins Solar Mounting Solutions THE INFORMATION IN THIS DRAWING IS CONFIDENTIAL AND PROPRIETARY. ANYREPRODUCTION, DISCLOSURE, OR USE THEREOF IS PROHIBITED WITHOUT THEWRITTEN CONSENT OF SUNRUN SOUTH LLC. 595 MARKET STREET, 29TH FLOOR ● SAN FRANCISCO, CA 94105 USAPHONE (415) 580-6900 ● FAX (415) 580-6902B REVISION: ALL DIMENSIONS IN INCHES 11.75 3.25 8.75 .45 6.75 n1.00 4.20 .30 3.25 n1.00 1.00 SLOT 1.50 2.78 1.78 1.50 .38 .30 1.37 1.62 UMBRELLA L FOOT PROPERTIES SKU DESCRIPTION 242-01219 ULTRA RAIL UMBRELLA L FOOT, SILVER 242-01220 ULTRA RAIL UMBRELLA L FOOT, BLACK COMP FLASHING PROPERTIES SKU DESCRIPTION 232-01375 COMP FLASHING, 9" X 12", BLACK ALUM 232-01376 COMP FLASHING, 9" X 12", SILVER ALUM n.35 1.80 105°RELEASEREVDATE NAME ADDRESSAPNEQUIP. CUT SHEETS ADDRESS kW PHOTOVOLTAIC PLANSSTANCHION - ROOF ATTACHMENT CUT SHEET R-112Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMIT RELEASEREVDATE NAME ADDRESSAPNEQUIP. CUT SHEETS ADDRESS kW PHOTOVOLTAIC PLANS8 I ) E I - Q M I RT E I - R S SR SP E I R IV SRRI SR I TQIR R S E R PI IR PS VI ER VIEQP RI ER SVE I R EPPE SR TVS R E SR IR TVI VI SP SR SV VI IR EP ETTP E SR - S IV T S S V TSPI RT V ER E SR IV I EV E IQ P ) E I - Q M I - 1 8S PIEVR QSVI EFS X )RTLEWI S IV RKW W X E E II ) E I 2IX M QEVX -R P IW - )R S SV SQQ R EX SR ER SRXVSP PI FPI RIX SVO RK W TTSVXW )XLIVRIX SV IPP PEV 3TX SREP VI ITXE PI E E PEFPI SV 40 FV KI 4VS IW TVS X SR QIXIV RK ER STX SREP SRW QTX SR QSR XSV RK QTPI 6I I W I VSQ TVI S W SQF RIV IRXIVI QS RX RK FVE OIXW W TTSVX W RKPI WX QS RX RK TTSVXW FE O ER W I SR X IRXV 9T XS S V TSPI FVER L V XW SV TP K R FVIEOIVW RSX R P I XSXEP 4 SV WXSVEKI FVER L V XW 6IP EFPI • Durable NRTL-certi ed NEMA type 6 IR PSW VI I IEV EVVERX 90 P WXI 8S PIEVR QSVI EFS X )RTLEWI S IV RKW W X k RT E I RIV PP V VI IV I PP VE IQEV SV VER R S QIR EVI VI IVI I V VI TI I S RIV IQ Combiner 3 X-IQ-AM1-240-3 - SQF RIV XL )RTLEWI - )R S TV RXI V X FSEV SV RXIKVEXI VI IR I KVE I 4 production metering (ANSI C12.20 +/- 0.5%) and optional* consumption monitoring (+/- 2.5%). ER RSX R P I SV IV WITEVEXIP Enphase Mobile Connect™CELLMODEM-03 (4G / 12-year data plan)CELLMODEM-01 (3G / 5-year data plan)CELLMODEM-M1 (4G based LTE-M / 5-year data plan) 4P K ER TPE R WXV EP KVE I IPP PEV QS IQ XL EXE TPER SV W WXIQW T XS microinverters. (Available in the US, Canada, Mexico, Puerto Rico, and the US Virgin Islands, where there is adequate cellular service in the installation area.) Consumption Monitoring* CT 8 40-8 Split core current transformers enable whole home consumption metering (+/- 2.5%). V X VIEOIVWBRK-10A-2-240BRK-15A-2-240 6 4 Supports Eaton BR210, BR215, BR220, BR230, BR240, BR250, and BR260 circuit breakers.Circuit breaker, 2 pole, 10A, Eaton BR210 Circuit breaker, 2 pole, 15A, Eaton BR215 V X FVIEOIV TSPI )EXSR 6 EPLC-01 4S IV P RI EVV IV SQQ R EX SR FV KI TE V U ERX X XA-PLUG-120-3 Accessory receptacle for Power Line Carrier in IQ Combiner 3 (required for EPLC-01) )2 4 6ITPE IQIRX - )R S TV RXI V X FSEV 4 SV SQF RIV 6EX RK SRX R S W X WXIQ SPXEKI 120/240 VAC, 60 Hz )EXSR 6 WIV IW F WFEV VEX RK 125 A Max. continuous current rating (output to grid)65 A Max. fuse/circuit rating (output) Branch circuits (solar and/or storage)Up to four 2-pole Eaton BR series Distributed Generation (DG) breakers only (not included) Max. continuous current rating (input from PV) Max. total branch circuit breaker rating (input)80A of distributed generation / 90A with IQ Envoy breaker included Production Metering CT WSP SVI TVI RWXEPPI ER VI XS - )R S Dimensions (WxHxD)49.5 x 37.5 x 16.8 cm (19.5” x 14.75” x 6.63”). Height is 21.06" (53.5 cm with mounting brackets). I KLX 7.5 kg (16.5 lbs) QF IRX XIQTIVEX VI VERKI -40º C to +46º C (-40º to 115º F) SSP RK 2EX VEP SR I X SR TP W LIEX WL IP )R PSW VI IR VSRQIRXEP VEX RK Outdoor, NRTL-certi ed, NEMA type 3R, polycarbonate construction VI W IW 20 A to 50 A breaker inputs: 14 to 4 AWG copper conductors 60 A breaker branch input: 4 to 1/0 AWG copper conductors Main lug combined output: 10 to 2/0 AWG copper conductors Neutral and ground: 14 to 1/0 copper conductorsAlways follow local code requirements for conductor sizing. PX X I To 2000 meters (6,560 feet) -RXIKVEXI 802.11b/g/n )XLIVRIX Optional, 802.3, Cat5E (or Cat 6) UTP Ethernet cable (not included) IPP PEV Optional, CELLMODEM-01 (3G) or CELLMODEM-03 (4G) or CELLMODEM-M1 (4G based LTE-M) RSX R P I SQTP ER I SQF RIV UL 1741 CAN/CSA C22.2 No. 107.147 CFR, Part 15, Class B, ICES 003Production metering: ANSI C12.20 accuracy class 0.5 (PV production) SQTP ER I - )R S UL 60601-1/CANCSA 22.2 No. 61010-1 * Consumption monitoring is required for Enphase Storage Systems. ) E I - Q M I AC COMBINER CUT SHEET R-113Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMIT pe.eaton.com General Duty Non-Fusible Safety Switch DG222URB UPC:782113144238 Dimensions: Height: 7.5 IN Length: 6.41 IN Width: 8.4 IN Weight:9 LB Notes:WARNING! Switch is not approved for service entrance unless a neutral kit is installed. Warranties: Eaton Selling Policy 25-000, one (1) year from the date of installation of the Product or eighteen (18) months from the date of shipment of the Product, whichever occurs first. Specifications: Type: General Duty/Non-Fusible Amperage Rating: 60A Enclosure: NEMA 3R Enclosure Material: Painted galvanized steel Fuse Configuration: Non-fusible Number Of Poles: Two-pole Number Of Wires: Two-wire Product Category: General Duty Safety Switch Voltage Rating: 240V Supporting documents: Eatons Volume 2-Commercial Distribution Eaton Specification Sheet - DG222URB Certifications: UL Listed Product compliance: No Data______________________________________________________________________ © 2016 Eaton. All rights reserved. V2-T1-26 Volume 2—Commercial Distribution CA08100003E—May 2018 www.eaton.com 1 1.1 Switching Devices Safety Switches All general-duty switches above 100A and all heavy-duty switches incorporate these K-Series switch design features. Two points of contact provide a positive open and close, easier operation, and also help prevent contact burning for longer contact life Visible Double-Break Rotary Blade Mechanism Protects against accidental contact with energized parts. Probe holes enable the user to test if the line side is energized without removing the shield. Not provided on general-duty switches, but available as a field kit or factory installed Clear Line Shield Clearly Visible Handle ●The position (ON or OFF) can be clearly seen from a distance and the length provides for easy operation Triple Padlocking Capability ●Personnel safety feature because the large hasp can accommodate up to three 3/8-inch (9.5 mm) shank locks Additional Locking Capability ●Cabinet door can be further padlocked at the top and bottom as applicable Interlocking Mechanism ●Door cannot be opened when the handle is in the ON position. Front and side operable defeater mechanism provides for user access when necessary on single- throw switches Tangential Knockouts ●An ample number are provided on the top, bottom and sides of both NEMA Types 1 and 3R enclosures through 200A Bolt-On Hub Kits ●For switches in a NEMA Type 3R, 30–200A. Use a Myers type hub for all others Standards and Certifications ●UL listed File No. E5239 ●Meets UL 98 for enclosed switches and NEMA Std. KS-1 Seismic Qualifications ●General-duty switches exceed the requirements of Uniform Building Code (UBC) and California Code Title 24 OSP-0011-10, OSP-0012-10 RELEASEREVDATE NAME ADDRESSAPNEQUIP. CUT SHEETS ADDRESS kW PHOTOVOLTAIC PLANSAC DISCONNECT CUT SHEET R-114Valley Solar21134A340 Riverside DrFlorence, MA 01062(413) 584-884411.200Kazakiewich, Roger782 Ryan RdNorthampton, MA 0106210/25/2021SUBMIT FOR PERMIT