Loading...
44 -113 1174 Florence Rd Fortier Dormer 2019-01-07PRELIMINARY NOT FOR CONSTRUCTION 4 PLY DROP BEAM WALL KEY= EXISTING 2x4 INTERIOR WALL = EXISTING 2x6 EXTERIOR WALL = EXISTING 2x4 HALF WALL = DEMO. 2x4 INTERIOR WALL = DEMO. 2x6 EXTERIOR WALL = DEMO 2x4 HALF WALL SPECIFICATIONS DIVISION 1 – GENERAL REQUIREMENTS: 1.CONTRACTOR WILL OBTAIN ALL NECESSARY PERMITS FOR CONSTRUCTION, EXCEPT THAT OWNER SHALL BE RESPONSIBLE FOR WATER, SEWER, ELECTRIC, AND CABLE FEES, IF ANY. 2.CONTRACT EXCLUDES APPROVALS BY ZONING BOARD OF APPEALS, PLANNING BOARD AND/OR CONSERVATION COMMISSION. 3.CONTRACT EXCLUDES ARCHITECTURAL OVERSIGHT. 4.ANY OTHER REQUIREMENTS FROM TOWN NOT EXPLICITLY INCLUDED IN THE PLANS OR SPECS ARE NOT INCLUDED IN THIS CONTRACT. 5.SITE SURVEY IS NOT INCLUDED 6.CONTRACTOR HAS NOT TESTED FOR ASBESTOS, LEAD, RADON, AND OTHER HAZARDOUS MATERIALS AND CONTRACT DOES NOT INCLUDE ANY REMEDIATION OR ABATEMENT WORK. 7.ALL OWNER-SUPPLIED ITEMS ARE NOT UNDER WARRANTY BY INTEGRITY OR INTEGRITY’S SUB-CONTRACTORS AND SUPPLIERS. ANY OWNER-SUPPLIED ITEMS THAT ARRIVE DAMAGED, LATE OR INCOMPLETE MAY CAUSE DELAYS TO THE SCHEDULE AND INTEGRITY WILL NOT BE HELD LIABLE FOR SUCH DELAYS. 8.ALL CONSTRUCTION DEBRIS WILL BE PLACED IN AN ONSITE DUMPSTER PROVIDED BY CONTRACTOR AND REMOVED BY CONTRACTOR AT CONTRACTOR’S EXPENSE. 9.ALL UTILITIES USED DURING CONSTRUCTION ARE THE OWNER’S RESPONSIBILITY. 10.CONTRACTOR SHALL PROMPTLY REMOVE ALL CONSTRUCTION EQUIPMENT AND MATERIALS FROM SITE AT CONCLUSION OF CONSTRUCTION. 11.WHEREVER CONTRACTOR DRAWING OR SPECIFICATION STATES, “MATCH EXISTING,” SUCH LANGUAGE SHALL MEAN “MATCH EXISTING AS CLOSELY AS POSSIBLE FROM CURRENTLY AVAILABLE STOCK ITEMS PURCHASED LOCALLY”. 12.ALL DIMENSIONS ARE FRAMING TO FRAMING UNLESS OTHERWISE SPECIFIED. 13.ALL EXISTING STRUCTURAL COMPONENTS TO REMAIN UNLESS OTHERWISE SPECIFIED. 14.APPLIANCES, FURNITURE, ETC. SHOWN ON PLANS ARE TO BE SUPPLIED BY OWNER 15.OWNER TO REMOVE EXISTING FURNISHINGS FROM SPACE OR STORE AS FAR FROM THE WORK AREA AS POSSIBLE. CONTRACTOR WILL COVER ANY REMAINING FURNITURE WILL PLASTIC HOWEVER THE PROJECT SCOPE WILL CREATE DUST AND OWNER SHOULD EXPECT ANYTHING LEFT IN THE WORK SPACE MAY GET DUSTY. 16.NO WINTER CONDITIONS ARE INCLUDED 17.CONTRACT INCLUDES BOTH ON-SITE AND IN-OFFICE JOB COORDINATION 18.REQUIRED INSURANCES INCLUDE GENERAL LIABILITY AND WORKMAN'S COMPENSATION 19.OWNER INTENDS TO REPLACE CARPET FLOORING AFTER COMPLETION OF THIS PROJECT. NO FLOORING PROTECTION INCLUDED. SECTIONS OF EXISTING CARPET WILL REMOVED AS NECESSARY FOR THIS PROJECT. 20.CONTRACTOR TO SUPPLY SANI-CAN FOR WORKERS' USE 21.WORK IS LIMITED TO STUDY UNLESS OTHERWISE NOTED Development & Construction, Inc.110 Pulpit Hill RoadAmherst, Ma 01002413-549-7919 FAX: 413-549-7918 EMAIL: INFO@INTEGBUILD.COMDESIGN BY HFFORTIER RESIDENCE1INTEGRITYA- SHEET: DATE: 11/30/2018CONSTRUCTION &BUILDING PERMIT SET1174 FLORENCE ROAD, FLORENCE, MA 01062DORMER ADDITIONCONTRACT AGREED BY: ____________________________________________________________________________ JOHN FORTIER - OWNER OF 1174 FLORENCE ROAD, FLORENCE, MA 01062 ____________________________________________________________________________ MICHELLE FORTIER - OWNER OF 1174 FLORENCE ROAD, FLORENCE, MA 01062 ____________________________________________________________________________ OWNER FOR INTEGRITY DEVELOPMENT & CONSTRUCTION, INC. FORTI ER RESI DENCE 1174 FLORENCE ROAD, FLORENCE, MA 01062 INDEX A-1 A-2 A-3 A-4 E-1 TITLE PAGE EXISTING FLOOR PLAN PROPOSED FLOOR PLAN AND WINDOW SCHEDULE PROPOSED ELEVATIONS AND SECTION EXISTING AND PROPOSED ELECTRICAL PLANS PRELIMINARY NOT FOR CONSTRUCTION DN TO REMAINTO REMAINTO REMAINTO REMAINTO REMAIN TO REMAINTO REMAIN6'-1 5/8"15'-7 1/2"4'-2 7/8"2'28'6'14'-2"5'-10" 26'28'26' 5'-10"14'-2"6' DROP BEAM TO REMAIN STORAGE MINI SPLIT TO REMAIN FLAT CEILING TO REMAIN BATH STUDY REMOVE & DISCARD ROOF HERE DEMO. SPECIFICATIONS DIVISIONS 2-5: SITE WORK, CONCRETE, MASONRY, METALS 1.NONE DIVISION 6: WOOD & PLASTICS 1.REMOVE & DISCARD (1) KNEEWALL PER PLAN 2.REMOVE & DISCARD EXISTING ROOF IN NEW DORMER AREA DIVISION 7: THERMAL & MOISTURE PROTECTION ROOFING 1.REMOVE & SAVE SHINGLES FROM EXISTING ROOF 2.IF SAVED SHINGLES ARE NOT IN REASONABLE CONDITION TO BE REUSED, REPORT CONDITION TO OWNER INSULATION 1.REMOVE & DISCARD EXISTING INSULATION IN REMOVED ROOF AREA ONLY DIVISION 8: DOORS & WINDOWS 1.ALL EXISTING DOORS AND WINDOWS TO REMAIN DIVISION 9: FINISHES WALL AND CEILING FINISHES 1.REMOVE & DISCARD WALL AND CEILING DRYWALL PER PLAN FLOORING 1.ALL FLOORING WORK TO BE DONE BY OWNER AFTER COMPLETION OF THIS PROJECT INTERIOR TRIM AND CARPENTRY 1.REMOVE & SAVE WAINSCOTING, CHAIR RAIL, AND BASEBOARD ON DEMOLISHED KNEEWALL DIVISIONS 10-11: SPECIALTIES, EQUIPMENT 1.NONE DIVISION 12: FURNISHINGS 1.NONE - OWNER TO REMOVE EXISTING FURNISHINGS FROM SPACE OR STORE AS FAR FROM THE WORK AREA AS POSSIBLE. CONTRACTOR WILL COVER ANY REMAINING FURNITURE WILL PLASTIC HOWEVER THE PROJECT SCOPE WILL CREATE DUST AND OWNER SHOULD EXPECT ANYTHING LEFT IN THE WORK SPACE MAY GET DUSTY DIVISIONS 13-14: SPECIAL CONSTRUCTION, CONVEYING SYSTEMS 1.NONE DIVISION 15: MECHANICAL HEATING 1.EXISTING MINI-SPLIT TO REMAIN PLUMBING 1.NONE DIVISION 16: ELECTRICAL 1.SEE PAGE E-1 FOR ELECTRICAL SPECIFICATIONS NO WORK NO WORK WALL KEY = EXISTING 2x4 INTERIOR WALL = EXISTING 2x6 EXTERIOR WALL = EXISTING 2x4 HALF WALL = DEMO. 2x4 INTERIOR WALL = DEMO. 2x6 EXTERIOR WALL = DEMO 2x4 KNEE WALL EXISTING CARPET TO REMAIN AND TO BE REPLACED BY OWNER AFTER COMPLETION OF THIS PROJECT REMOVE & DISCARD KNEE WALL HERE REMOVE CARPET IN THIS AREA AS NECESSARY FOR DORMER CONSTRUCTION NO WORK REMOVE & SAVE SHINGLES FROM EXISTING ROOF IF SAVED SHINGLES ARE NOT IN REASONABLE CONDITION TO BE REUSED, REPORT CONDITION TO OWNER. DN DROP BEAM TO REMAIN MINI SPLIT TO REMAIN FLAT CEILING TO REMAIN REMOVE & DISCARD ROOF HERE DEMO. SPECIFICATIONS DIVISIONS 2-5: SITE WORK, CONCRETE, MASONRY, METALS 1.NONE DIVISION 6: WOOD & PLASTICS 1.REMOVE & DISCARD (1) KNEEWALL PER PLAN 2.REMOVE & DISCARD EXISTING ROOF IN NEW DORMER AREA DIVISION 7: THERMAL & MOISTURE PROTECTION ROOFING 1.REMOVE & SAVE SHINGLES FROM EXISTING ROOF 2.IF SAVED SHINGLES ARE NOT IN REASONABLE CONDITION TO BE REUSED, REPORT CONDITION TO OWNER INSULATION 1.REMOVE & DISCARD EXISTING INSULATION IN REMOVED ROOF AREA ONLY DIVISION 8: DOORS & WINDOWS 1.ALL EXISTING DOORS AND WINDOWS TO REMAIN DIVISION 9: FINISHES WALL AND CEILING FINISHES 1.REMOVE & DISCARD WALL AND CEILING DRYWALL PER PLAN FLOORING 1.ALL FLOORING WORK TO BE DONE BY OWNER AFTER COMPLETION OF THIS PROJECT INTERIOR TRIM AND CARPENTRY 1.REMOVE & SAVE WAINSCOTING, CHAIR RAIL, AND BASEBOARD ON DEMOLISHED KNEEWALL DIVISIONS 10-11: SPECIALTIES, EQUIPMENT 1.NONE DIVISION 12: FURNISHINGS 1.NONE - OWNER TO REMOVE EXISTING FURNISHINGS FROM SPACE OR STORE AS FAR FROM THE WORK AREA AS POSSIBLE. CONTRACTOR WILL COVER ANY REMAINING FURNITURE WILL PLASTIC HOWEVER THE PROJECT SCOPE WILL CREATE DUST AND OWNER SHOULD EXPECT ANYTHING LEFT IN THE WORK SPACE MAY GET DUSTY DIVISIONS 13-14: SPECIAL CONSTRUCTION, CONVEYING SYSTEMS 1.NONE DIVISION 15: MECHANICAL HEATING 1.EXISTING MINI-SPLIT TO REMAIN PLUMBING 1.NONE DIVISION 16: ELECTRICAL 1.SEE PAGE E-1 FOR ELECTRICAL SPECIFICATIONS NO WORK NO WORK WALL KEY = EXISTING 2x4 INTERIOR WALL = EXISTING 2x6 EXTERIOR WALL = EXISTING 2x4 HALF WALL = DEMO. 2x4 INTERIOR WALL = DEMO. 2x6 EXTERIOR WALL = DEMO 2x4 KNEE WALL EXISTING CARPET TO REMAIN AND TO BE REPLACED BY OWNER AFTER COMPLETION OF THIS PROJECT REMOVE & DISCARD KNEE WALL HERE REMOVE CARPET IN THIS AREA AS NECESSARY FOR DORMER CONSTRUCTION NO WORK REMOVE & SAVE SHINGLES FROM EXISTING ROOF IF SAVED SHINGLES ARE NOT IN REASONABLE CONDITION TO BE REUSED, REPORT CONDITION TO OWNER. Development & Construction, Inc.110 Pulpit Hill RoadAmherst, Ma 01002413-549-7919 FAX: 413-549-7918 EMAIL: INFO@INTEGBUILD.COMDESIGN BY HFFORTIER RESIDENCE2INTEGRITYA- SHEET: DATE: 11/30/2018CONSTRUCTION &BUILDING PERMIT SET1174 FLORENCE ROAD, FLORENCE, MA 01062DORMER ADDITION1 A-02 1 A-02 EXISTING FLOOR PLAN 1/4" = 1'-0" PRELIMINARY NOT FOR CONSTRUCTION DN TO REMAINTO REMAINTO REMAINTO REMAINTO REMAIN TO REMAINTO REMAINW01 W02 W03 3'-2 3/4"3'-10 1/4"3'-10 1/4"3'-2 3/4"7'-2 7/8"4'-1 15/16"2'-6 1/16"3'-9 1/2"10'-3 5/8"4'-2 7/8"15'-7 1/2"4'-2 7/8"2'28'6'14'-2" 26'28'26' 5'-10"14'-2"6' DROP BEAM TO REMAIN STORAGE MINI SPLIT TO REMAIN FLAT CEILING TO REMAIN BATH STUDY ALIGN NEW WALL WITH EXISTING SPECIFICATIONS DIVISIONS 2-5: SITE WORK, CONCRETE, MASONRY, METALS 1.NONE DIVISION 6: WOOD & PLASTICS 1.2x6 KD SPRUCE EXTERIOR WALLS @ 16" O.C. 2.2x10 RAFTERS @ 16" O.C. 3.PITCH OF NEW DORMER TO MATCH EXISTING DORMER (APPROX. 2 1/2 : 12) DIVISION 7: THERMAL & MOISTURE PROTECTION EXTERIOR TRIM AND SIDING 1.SUPPLY & INSTALL 4 1/2" GRAY PRIMED RED CEDAR LAPPED SIDING ON SIDE WALLS OF NEW DORMER TO MATCH EXISTING 2.NO SIDING TO WINDOW WALL OF NEW DORMER; 1x FJP PINE TRIM TO MATCH EXISTING DORMER DETAIL ROOFING 1.SUPPLY & INSTALL 30-YEAR ARCHITECTURAL SHINGLES TO MATCH EXISTING ROOF 2.OWNER TO SELECT FROM SAMPLE BOARDS SUPPLIED BY CONTRACTOR. SHINGLES WILL NOT CARRY A WARRANTY DUE TO LOW PITCH. OWNER HAS BEEN MADE AWARE OF THIS AND ASSUMES ALL RISK ASSOCIATED WITH THE LOW PITCH. 3.NO GUTTERS ARE INCLUDED 4.INSTALL SAVED SHINGLES TO PATCH PERIMETER OF NEW HOLE IN ROOF 5.RE-USED SHINGLES WILL NOT CARRY A WARRANTY AND OWNER ASSUMES ALL RISK ASSOCIATED WITH RE-USING SHINGLES 6.SUPPLY & INSTALL GRACE ICE AND WATER BARRIER TO ENTIRE NEW ROOF 7.ROOF IS A HOT ROOF: NO INSULATION IS PROVIDED INSULATION 1.SUPPLY & INSTALL 3" CLOSED-CELL SPRAY FOAM IN EXTERIOR WALL, R-21 2.SUPPLY & INSTALL 7" OF CLOSED-CELL SPRAY FOAM IN RAFTER CAVITY, R-49 3.IT IS ASSUMED THE EXISTING FLOOR IS FULLY INSULATED. IF FOUND TO BE UNDER- OR NON-INSULATED, COST TO BE EXTRA TO CONTRACT NO WORK NO WORK WALL KEY = EXISTING 2x4 INTERIOR WALL = EXISTING 2x6 EXTERIOR WALL = EXISTING 2x4 HALF WALL = NEW 2x4 INTERIOR WALL = NEW 2x6 EXTERIOR WALL APPROX.ALIGN NEW WALLWITH EXISTINGNEW WAINSCOTING TO THIS WALLEQ.EQ.SPECIFICATIONS DIVISION 8: DOORS & WINDOWS 1.SUPPLY & INSTALL (3) ANDERSEN DOUBLE CASEMENT 8-LITE SDL WINDOWS WITH SPACERS, WITH WOOD INTERIOR AND WHITE CLAD EXTERIOR DIVISION 9: FINISHES WALL AND CEILING FINISHES 1.1/2" STD. DRYWALL TO ALL NEW WALL AND CEILING FRAMING 2.NO WORK TO EXISTING GARAGE DRYWALL INCLUDED 3.ALL DRYWALL TO BE TAPED WITH (3) COATS OF JOINT COMPOUND AND SANDED TO A SMOOTH FINISH. NO SPECIALTY TEXTURES INCLUDED. FLOORING 1.FLOORING TO BE SUPPLIED AND INSTALLED BY OWNER AFTER COMPLETION OF THIS PROJECT INTERIOR TRIM AND CARPENTRY 1.INSTALL SAVED WAINSCOTING, CHAIR RAIL, AND BASEBOARD ON INDICATED WALL 2.SUPPLY & INSTALL WAINSCOTING, CHAIR RAIL, AND BASEBOARD ON (2) INDICATED WALLS TO MATCH EXISTING AS CLOSELY AS POSSIBLE FROM STOCK PROFILES 3.SUPPLY & INSTALL WINDOW CASING TO MATCH EXISTING DIVISIONS 10-14: SPECIALTIES, EQUIPMENT, FURNISHINGS, SPECIAL CONSTRUCTION, CONVEYING SYSTEMS 1.NONE DIVISION 15: MECHANICAL 1.EXISTING MINI SPLIT TO REMAIN 3 A-04 3 A-04 1 A-04 1 A-04 2 A-04 2 A-04 APPROX. 4 A-04 4 A-04 4 A-04 4 A-04 REUSE EXISTING WAINSCOTING ON THIS WALL NEW WAINSCOTING TO THIS WALL DN DROP BEAM TO REMAIN MINI SPLIT TO REMAIN FLAT CEILING TO REMAIN ALIGN NEW WALL WITH EXISTING SPECIFICATIONS DIVISIONS 2-5: SITE WORK, CONCRETE, MASONRY, METALS 1.NONE DIVISION 6: WOOD & PLASTICS 1.2x6 KD SPRUCE EXTERIOR WALLS @ 16" O.C. 2.2x10 RAFTERS @ 16" O.C. 3.PITCH OF NEW DORMER TO MATCH EXISTING DORMER (APPROX. 2 1/2 : 12) DIVISION 7: THERMAL & MOISTURE PROTECTION EXTERIOR TRIM AND SIDING 1.SUPPLY & INSTALL 4 1/2" GRAY PRIMED RED CEDAR LAPPED SIDING ON SIDE WALLS OF NEW DORMER TO MATCH EXISTING 2.NO SIDING TO WINDOW WALL OF NEW DORMER; 1x FJP PINE TRIM TO MATCH EXISTING DORMER DETAIL ROOFING 1.SUPPLY & INSTALL 30-YEAR ARCHITECTURAL SHINGLES TO MATCH EXISTING ROOF 2.OWNER TO SELECT FROM SAMPLE BOARDS SUPPLIED BY CONTRACTOR. SHINGLES WILL NOT CARRY A WARRANTY DUE TO LOW PITCH. OWNER HAS BEEN MADE AWARE OF THIS AND ASSUMES ALL RISK ASSOCIATED WITH THE LOW PITCH. 3.NO GUTTERS ARE INCLUDED 4.INSTALL SAVED SHINGLES TO PATCH PERIMETER OF NEW HOLE IN ROOF 5.RE-USED SHINGLES WILL NOT CARRY A WARRANTY AND OWNER ASSUMES ALL RISK ASSOCIATED WITH RE-USING SHINGLES 6.SUPPLY & INSTALL GRACE ICE AND WATER BARRIER TO ENTIRE NEW ROOF 7.ROOF IS A HOT ROOF: NO INSULATION IS PROVIDED INSULATION 1.SUPPLY & INSTALL 3" CLOSED-CELL SPRAY FOAM IN EXTERIOR WALL, R-21 2.SUPPLY & INSTALL 7" OF CLOSED-CELL SPRAY FOAM IN RAFTER CAVITY, R-49 3.IT IS ASSUMED THE EXISTING FLOOR IS FULLY INSULATED. IF FOUND TO BE UNDER- OR NON-INSULATED, COST TO BE EXTRA TO CONTRACT NO WORK NO WORK WALL KEY = EXISTING 2x4 INTERIOR WALL = EXISTING 2x6 EXTERIOR WALL = EXISTING 2x4 HALF WALL = NEW 2x4 INTERIOR WALL = NEW 2x6 EXTERIOR WALL APPROX.ALIGN NEW WALLWITH EXISTINGNEW WAINSCOTING TO THIS WALLEQ.EQ.SPECIFICATIONS DIVISION 8: DOORS & WINDOWS 1.SUPPLY & INSTALL (3) ANDERSEN DOUBLE CASEMENT 8-LITE SDL WINDOWS WITH SPACERS, WITH WOOD INTERIOR AND WHITE CLAD EXTERIOR DIVISION 9: FINISHES WALL AND CEILING FINISHES 1.1/2" STD. DRYWALL TO ALL NEW WALL AND CEILING FRAMING 2.NO WORK TO EXISTING GARAGE DRYWALL INCLUDED 3.ALL DRYWALL TO BE TAPED WITH (3) COATS OF JOINT COMPOUND AND SANDED TO A SMOOTH FINISH. NO SPECIALTY TEXTURES INCLUDED. FLOORING 1.FLOORING TO BE SUPPLIED AND INSTALLED BY OWNER AFTER COMPLETION OF THIS PROJECT INTERIOR TRIM AND CARPENTRY 1.INSTALL SAVED WAINSCOTING, CHAIR RAIL, AND BASEBOARD ON INDICATED WALL 2.SUPPLY & INSTALL WAINSCOTING, CHAIR RAIL, AND BASEBOARD ON (2) INDICATED WALLS TO MATCH EXISTING AS CLOSELY AS POSSIBLE FROM STOCK PROFILES 3.SUPPLY & INSTALL WINDOW CASING TO MATCH EXISTING DIVISIONS 10-14: SPECIALTIES, EQUIPMENT, FURNISHINGS, SPECIAL CONSTRUCTION, CONVEYING SYSTEMS 1.NONE DIVISION 15: MECHANICAL 1.EXISTING MINI SPLIT TO REMAIN APPROX. REUSE EXISTING WAINSCOTING ON THIS WALL NEW WAINSCOTING TO THIS WALL DN DROP BEAM TO REMAIN MINI SPLIT TO REMAIN FLAT CEILING TO REMAIN ALIGN NEW WALL WITH EXISTING SPECIFICATIONS DIVISIONS 2-5: SITE WORK, CONCRETE, MASONRY, METALS 1.NONE DIVISION 6: WOOD & PLASTICS 1.2x6 KD SPRUCE EXTERIOR WALLS @ 16" O.C. 2.2x10 RAFTERS @ 16" O.C. 3.PITCH OF NEW DORMER TO MATCH EXISTING DORMER (APPROX. 2 1/2 : 12) DIVISION 7: THERMAL & MOISTURE PROTECTION EXTERIOR TRIM AND SIDING 1.SUPPLY & INSTALL 4 1/2" GRAY PRIMED RED CEDAR LAPPED SIDING ON SIDE WALLS OF NEW DORMER TO MATCH EXISTING 2.NO SIDING TO WINDOW WALL OF NEW DORMER; 1x FJP PINE TRIM TO MATCH EXISTING DORMER DETAIL ROOFING 1.SUPPLY & INSTALL 30-YEAR ARCHITECTURAL SHINGLES TO MATCH EXISTING ROOF 2.OWNER TO SELECT FROM SAMPLE BOARDS SUPPLIED BY CONTRACTOR. SHINGLES WILL NOT CARRY A WARRANTY DUE TO LOW PITCH. OWNER HAS BEEN MADE AWARE OF THIS AND ASSUMES ALL RISK ASSOCIATED WITH THE LOW PITCH. 3.NO GUTTERS ARE INCLUDED 4.INSTALL SAVED SHINGLES TO PATCH PERIMETER OF NEW HOLE IN ROOF 5.RE-USED SHINGLES WILL NOT CARRY A WARRANTY AND OWNER ASSUMES ALL RISK ASSOCIATED WITH RE-USING SHINGLES 6.SUPPLY & INSTALL GRACE ICE AND WATER BARRIER TO ENTIRE NEW ROOF 7.ROOF IS A HOT ROOF: NO INSULATION IS PROVIDED INSULATION 1.SUPPLY & INSTALL 3" CLOSED-CELL SPRAY FOAM IN EXTERIOR WALL, R-21 2.SUPPLY & INSTALL 7" OF CLOSED-CELL SPRAY FOAM IN RAFTER CAVITY, R-49 3.IT IS ASSUMED THE EXISTING FLOOR IS FULLY INSULATED. IF FOUND TO BE UNDER- OR NON-INSULATED, COST TO BE EXTRA TO CONTRACT NO WORK NO WORK WALL KEY = EXISTING 2x4 INTERIOR WALL = EXISTING 2x6 EXTERIOR WALL = EXISTING 2x4 HALF WALL = NEW 2x4 INTERIOR WALL = NEW 2x6 EXTERIOR WALL APPROX.ALIGN NEW WALLWITH EXISTINGNEW WAINSCOTING TO THIS WALLEQ.EQ.SPECIFICATIONS DIVISION 8: DOORS & WINDOWS 1.SUPPLY & INSTALL (3) ANDERSEN DOUBLE CASEMENT 8-LITE SDL WINDOWS WITH SPACERS, WITH WOOD INTERIOR AND WHITE CLAD EXTERIOR DIVISION 9: FINISHES WALL AND CEILING FINISHES 1.1/2" STD. DRYWALL TO ALL NEW WALL AND CEILING FRAMING 2.NO WORK TO EXISTING GARAGE DRYWALL INCLUDED 3.ALL DRYWALL TO BE TAPED WITH (3) COATS OF JOINT COMPOUND AND SANDED TO A SMOOTH FINISH. NO SPECIALTY TEXTURES INCLUDED. FLOORING 1.FLOORING TO BE SUPPLIED AND INSTALLED BY OWNER AFTER COMPLETION OF THIS PROJECT INTERIOR TRIM AND CARPENTRY 1.INSTALL SAVED WAINSCOTING, CHAIR RAIL, AND BASEBOARD ON INDICATED WALL 2.SUPPLY & INSTALL WAINSCOTING, CHAIR RAIL, AND BASEBOARD ON (2) INDICATED WALLS TO MATCH EXISTING AS CLOSELY AS POSSIBLE FROM STOCK PROFILES 3.SUPPLY & INSTALL WINDOW CASING TO MATCH EXISTING DIVISIONS 10-14: SPECIALTIES, EQUIPMENT, FURNISHINGS, SPECIAL CONSTRUCTION, CONVEYING SYSTEMS 1.NONE DIVISION 15: MECHANICAL 1.EXISTING MINI SPLIT TO REMAIN APPROX. REUSE EXISTING WAINSCOTING ON THIS WALL NEW WAINSCOTING TO THIS WALL DN DROP BEAM TO REMAIN MINI SPLIT TO REMAIN FLAT CEILING TO REMAIN ALIGN NEW WALL WITH EXISTING SPECIFICATIONSDIVISIONS 2-5: SITE WORK, CONCRETE, MASONRY, METALS1.NONEDIVISION 6: WOOD & PLASTICS 1.2x6 KD SPRUCE EXTERIOR WALLS @ 16" O.C. 2.2x10 RAFTERS @ 16" O.C. 3.PITCH OF NEW DORMER TO MATCH EXISTING DORMER (APPROX. 2 1/2 : 12) DIVISION 7: THERMAL & MOISTURE PROTECTION EXTERIOR TRIM AND SIDING 1.SUPPLY & INSTALL 4 1/2" GRAY PRIMED RED CEDAR LAPPED SIDING ON SIDE WALLS OF NEW DORMER TO MATCH EXISTING 2.NO SIDING TO WINDOW WALL OF NEW DORMER; 1x FJP PINE TRIM TO MATCH EXISTING DORMER DETAIL ROOFING 1.SUPPLY & INSTALL 30-YEAR ARCHITECTURAL SHINGLES TO MATCH EXISTING ROOF 2.OWNER TO SELECT FROM SAMPLE BOARDS SUPPLIED BY CONTRACTOR. SHINGLES WILL NOT CARRY A WARRANTY DUE TO LOW PITCH. OWNER HAS BEEN MADE AWARE OF THIS AND ASSUMES ALL RISK ASSOCIATED WITH THE LOW PITCH. 3.NO GUTTERS ARE INCLUDED 4.INSTALL SAVED SHINGLES TO PATCH PERIMETER OF NEW HOLE IN ROOF 5.RE-USED SHINGLES WILL NOT CARRY A WARRANTY AND OWNER ASSUMES ALL RISK ASSOCIATED WITH RE-USING SHINGLES 6.SUPPLY & INSTALL GRACE ICE AND WATER BARRIER TO ENTIRE NEW ROOF 7.ROOF IS A HOT ROOF: NO INSULATION IS PROVIDED INSULATION 1.SUPPLY & INSTALL 3" CLOSED-CELL SPRAY FOAM IN EXTERIOR WALL, R-21 2.SUPPLY & INSTALL 7" OF CLOSED-CELL SPRAY FOAM IN RAFTER CAVITY, R-49 3.IT IS ASSUMED THE EXISTING FLOOR IS FULLY INSULATED. IF FOUND TO BE UNDER- OR NON-INSULATED, COST TO BE EXTRA TO CONTRACT NO WORK NO WORK WALL KEY = EXISTING 2x4 INTERIOR WALL = EXISTING 2x6 EXTERIOR WALL = EXISTING 2x4 HALF WALL = NEW 2x4 INTERIOR WALL = NEW 2x6 EXTERIOR WALL APPROX.ALIGN NEW WALLWITH EXISTINGNEW WAINSCOTING TO THIS WALLEQ.EQ.SPECIFICATIONSDIVISION 8: DOORS & WINDOWS1.SUPPLY & INSTALL (3) ANDERSEN DOUBLE CASEMENT8-LITE SDL WINDOWS WITH SPACERS, WITH WOODINTERIOR AND WHITE CLAD EXTERIOR DIVISION 9: FINISHES WALL AND CEILING FINISHES 1.1/2" STD. DRYWALL TO ALL NEW WALL AND CEILING FRAMING 2.NO WORK TO EXISTING GARAGE DRYWALL INCLUDED 3.ALL DRYWALL TO BE TAPED WITH (3) COATS OF JOINT COMPOUND AND SANDED TO A SMOOTH FINISH. NO SPECIALTY TEXTURES INCLUDED. FLOORING 1.FLOORING TO BE SUPPLIED AND INSTALLED BY OWNER AFTER COMPLETION OF THIS PROJECT INTERIOR TRIM AND CARPENTRY 1.INSTALL SAVED WAINSCOTING, CHAIR RAIL, AND BASEBOARD ON INDICATED WALL 2.SUPPLY & INSTALL WAINSCOTING, CHAIR RAIL, AND BASEBOARD ON (2) INDICATED WALLS TO MATCH EXISTING AS CLOSELY AS POSSIBLE FROM STOCK PROFILES 3.SUPPLY & INSTALL WINDOW CASING TO MATCH EXISTING DIVISIONS 10-14: SPECIALTIES, EQUIPMENT, FURNISHINGS, SPECIAL CONSTRUCTION, CONVEYING SYSTEMS 1.NONE DIVISION 15: MECHANICAL 1.EXISTING MINI SPLIT TO REMAIN APPROX. WINDOW SCHEDULE MANUFACTURER KEY LABEL QTY.JAMB WIDTH HEIGHT R.O.T.O.W.DESCRIPTION EXT. FINISH INT. FINISH SCREEN GRILL TEMP.HARDWARE FINISH HEADER & JACK STUDS ANDERSEN W01 CN24 1 6 9/16"3'-4 3/4"4'-0"3'-5 1/4" x 4'-0 1/2" MATCH EXISTING DBL CASEMENT; LOW E4 DOUBLE PANE HEATLOCK GLASS WHITE CLEAR PINE Y 8 DIVIDED LITES WITH SPACER; WHITE EXTERIOR, CLEAR PINE INTERIOR N STONE (2) 2x6 &1 400 SERIES W02 CN24 1 6 9/16"3'-4 3/4"4'-0"3'-5 1/4" x 4'-0 1/2" MATCH EXISTING DBL CASEMENT; LOW E4 DOUBLE PANE HEATLOCK GLASS WHITE CLEAR PINE Y 8 DIVIDED LITES WITH SPACER; WHITE EXTERIOR, CLEAR PINE INTERIOR N STONE (2) 2x6 &1 W03 CN24 1 6 9/16"3'-4 3/4"4'-0"3'-5 1/4" x 4'-0 1/2" MATCH EXISTING DBL CASEMENT; LOW E4 DOUBLE PANE HEATLOCK GLASS WHITE CLEAR PINE Y 8 DIVIDED LITES WITH SPACER; WHITE EXTERIOR, CLEAR PINE INTERIOR N STONE (2) 2x6 &1 TOTAL 3 REUSE EXISTING WAINSCOTING ON THIS WALL NEW WAINSCOTING TO THIS WALL Development & Construction, Inc.110 Pulpit Hill RoadAmherst, Ma 01002413-549-7919 FAX: 413-549-7918 EMAIL: INFO@INTEGBUILD.COMDESIGN BY HFFORTIER RESIDENCE3INTEGRITYA- SHEET: DATE: 11/30/2018CONSTRUCTION &BUILDING PERMIT SET1174 FLORENCE ROAD, FLORENCE, MA 01062DORMER ADDITION1 A-03 1 A-03 PROPOSED FLOOR PLAN 1/4" = 1'-0" 3 A-03 3 A-03 PROPOSED WINDOW SCHEDULE PRELIMINARY NOT FOR CONSTRUCTION TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN EXISTING 2x FLOOR JOISTS TO REMAIN EXTERIOR WALLS 1.SUPPLY & INSTALL 1x FJP PINE PVC EXTERIOR WINDOW TRIM TO MATCH EXISTING 2.SUPPLY & INSTALL 4 1/2" GRAY PRIMED RED CEDAR LAPPED SIDING ON SIDE WALLS OF NEW DORMER TO MATCH EXISTING 3.NO SIDING TO WINDOW WALL OF NEW DORMER; 1x FJP PINE TRIM TO MATCH EXISTING DORMER DETAIL 4.2x6 KD SPRUCE EXTERIOR WALLS @ 16" O.C. 5.SUPPLY & INSTALL 3" CLOSED-CELL SPRAY FOAM IN EXTERIOR WALL, R-21 6.1/2" STD DRYWALL TO ALL NEW WALL FRAMING 7.SUPPLY & INSTALL INTERIOR WINDOW TRIM TO MATCH EXISTING ROOF 1.SUPPLY & INSTALL 30-YEAR ARCHITECTURAL SHINGLES TO MATCH EXISTING ROOF 2.SUPPLY & INSTALL GRACE ICE & WATER BARRIER TO ENTIRE NEW ROOF 3.2x10 RAFTERS @ 16" O.C. 4.PITCH OF NEW DORMER TO MATCH EXISTING DORMER (APPROX. 2 1/2 : 12) 5.RAKE AND FASCIA PROFILE AND MATERIALS TO MATCH EXISTING 6.SUPPLY & INSTALL 7" OF CLOSED-CELL SPRAY FOAM IN RAFTER CAVITY, R-49 7.1/2" STD DRYWALL TO ALL NEW CEILING FRAMING SUPPLY & INSTALL WAINSCOTING AND CHAIR RAIL TO MATCH EXISTING EXISTING WAINSCOTING AND CHAIR RAIL TO REMAIN NO WORK TO EXISTING DORMER TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN W01W02W03W01W02W03 EXISTING TO REMAIN NO SIDING TO WINDOW WALL OF NEW DORMER; 1x FJP PINE TRIM TO MATCH EXISTING DORMER DETAIL WINDOW TRIM AND SILL TO MATCH EXISTING USE SAVED SHINGLES TO PATCH HERE FIRST W01W02W03W01W02W03 TO REMAINTO REMAINTO REMAINTO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN TO REMAIN Development & Construction, Inc.110 Pulpit Hill RoadAmherst, Ma 01002413-549-7919 FAX: 413-549-7918 EMAIL: INFO@INTEGBUILD.COMDESIGN BY HFFORTIER RESIDENCE4INTEGRITYA- SHEET: DATE: 11/30/2018CONSTRUCTION &BUILDING PERMIT SET1174 FLORENCE ROAD, FLORENCE, MA 01062DORMER ADDITIONPROPOSED NORTH ELEVATION 1/4" = 1'-0" 1 A-04 1 A-04 4 A-04 4 A-04 PROPOSED EAST ELEVATION 1/4" = 1'-0" 3 A-04 3 A-04 PROPOSED SOUTH ELEVATION 1/4" = 1'-0" 2 A-04 2 A-04 PROPOSED SECTION 1/4" = 1'-0" PRELIMINARY NOT FOR CONSTRUCTION DN TO REMAINTO REMAINTO REMAINTO REMAINTO REMAIN TO REMAINTO REMAINR SD B C C CC CO EP DM 3 STORAGE ETRETR ETRETR ETR ETR ETR ETR ETR ETR ETR ETR REMOVE & DISCARD ALL BATH STUDY ETR REMOVE & DISCARD DIVISION 16: ELECTRICAL DEMO 1.ALL ELECTRICAL WORK TO BE DONE BY ALLOWANCE 2.ALL ELECTRICAL TO REMAIN IN EXISTING LOCATIONS UNLESS OTHERWISE SPECIFIED 3.NO WORK TO EXISTING SMOKE/HEAT/CO DETECTOR IS INCLUDED; IF WORK TO THIS SYSTEM IS REQUIRED BY THE TOWN, COST TO BE EXTRA TO CONTRACT 4.REMOVE & DISCARD (1) OUTLET AND (1) QUADRUPLEX OUTLET 5.REMOVE & DISCARD TELEPHONE JACKS AND CABLE JACKS ETR ETR DN ETRETR ETRETR ETR ETR ETR ETR ETR ETR ETR ETR REMOVE & DISCARD ALL ETR REMOVE & DISCARD DIVISION 16: ELECTRICAL DEMO 1.ALL ELECTRICAL WORK TO BE DONE BY ALLOWANCE 2.ALL ELECTRICAL TO REMAIN IN EXISTING LOCATIONS UNLESS OTHERWISE SPECIFIED 3.NO WORK TO EXISTING SMOKE/HEAT/CO DETECTOR IS INCLUDED; IF WORK TO THIS SYSTEM IS REQUIRED BY THE TOWN, COST TO BE EXTRA TO CONTRACT 4.REMOVE & DISCARD (1) OUTLET AND (1) QUADRUPLEX OUTLET 5.REMOVE & DISCARD TELEPHONE JACKS AND CABLE JACKS ETR ETR DN TO REMAINTO REMAINTO REMAINTO REMAINTO REMAIN TO REMAINTO REMAINW01 W02 W03 R SD B C C CO EP DM 3 C C STORAGE ETRETR ETRETR ETR ETR ETR ETR ETR ETR ETR ETR ETR BATH STUDY NEW NEW NEW NEW NEW ETR DIVISION 16: ELECTRICAL 1.ALL ELECTRICAL WORK TO BE DONE BY ALLOWANCE 2.ALL ELECTRICAL TO REMAIN IN EXISTING LOCATIONS UNLESS OTHERWISE SPECIFIED 3.ALL NEW ELECTRICAL DEVICE LOCATIONS TO BE CONFIRMED W/ OWNER IN FIELD AND ARE CONTINGENT UPON EXISTING FRAMING LOCATIONS; IF REFRAMING IS REQUIRED FOR DESIRED LOCATIONS, SUCH CHANGES WILL BE ADDITIONAL TO CONTRACT 4.NO WORK TO EXISTING SMOKE/HEAT/CO DETECTOR IS INCLUDED; IF WORK TO THIS SYSTEM IS REQUIRED BY THE TOWN, COST TO BE EXTRA TO CONTRACT 5.ALL SWITCHES TO BE TOGGLE STYLE; COLOR WHITE 6.ALL OUTLETS TO BE DUPLEX STYLE; COLOR WHITE 7.WIRE OUTLETS TO CODE 8.SUPPLY & INSTALL (2) CABLE JACKS AND (2) TELEPHONE JACKS 9.SUPPLY & INSTALL (3) PENDANT LIGHTS ON SINGLE SWITCH, FIXTURES TBD BY ALLOWANCE ETR DN ETRETR ETRETR ETR ETR ETR ETR ETR ETR ETR ETR ETR NEW NEW NEW NEW NEW ETR DIVISION 16: ELECTRICAL 1.ALL ELECTRICAL WORK TO BE DONE BY ALLOWANCE 2.ALL ELECTRICAL TO REMAIN IN EXISTING LOCATIONS UNLESS OTHERWISE SPECIFIED 3.ALL NEW ELECTRICAL DEVICE LOCATIONS TO BE CONFIRMED W/ OWNER IN FIELD AND ARE CONTINGENT UPON EXISTING FRAMING LOCATIONS; IF REFRAMING IS REQUIRED FOR DESIRED LOCATIONS, SUCH CHANGES WILL BE ADDITIONAL TO CONTRACT 4.NO WORK TO EXISTING SMOKE/HEAT/CO DETECTOR IS INCLUDED; IF WORK TO THIS SYSTEM IS REQUIRED BY THE TOWN, COST TO BE EXTRA TO CONTRACT 5.ALL SWITCHES TO BE TOGGLE STYLE; COLOR WHITE 6.ALL OUTLETS TO BE DUPLEX STYLE; COLOR WHITE 7.WIRE OUTLETS TO CODE 8.SUPPLY & INSTALL (2) CABLE JACKS AND (2) TELEPHONE JACKS 9.SUPPLY & INSTALL (3) PENDANT LIGHTS ON SINGLE SWITCH, FIXTURES TBD BY ALLOWANCE ETR Development & Construction, Inc.110 Pulpit Hill RoadAmherst, Ma 01002413-549-7919 FAX: 413-549-7918 EMAIL: INFO@INTEGBUILD.COMDESIGN BY HFFORTIER RESIDENCE5INTEGRITYA- SHEET: DATE: 11/30/2018CONSTRUCTION &BUILDING PERMIT SET1174 FLORENCE ROAD, FLORENCE, MA 01062DORMER ADDITION2 E-01 2 E-01 PROPOSED ELECTRICAL PLAN 1/4" = 1'-0" 1 E-01 1 E-01 EXISTING ELECTRICAL PLAN 1/4" = 1'-0"