lpp-12-16-led-shoeboxEngineered&Manufactured
In TheUSARev. V09142017
ENERGYSAVINGS
50-80%
LED LIFE
300,000+HOURS
IntertekLED ENGINE
#SunnySide
U
p
TECHNOL O GYThis specification brochure is intended to serve as a general guide. Our products are continually being engineered and improved, and specifications are subject to change without notice.
Project Name
Catalog #
Fixture Type
Product Overview
Advanced light engine technology in a traditional housing design.
Wisconsin engineering and craftsmanship utilizing premium components.
Our LED lights, light poles and brackets are proudly engineered and manufactured in the USA. We use only the highest quality components, and our LED Shoebox fixtures deliver unmatched light output and efficiency for any area or flood lighting project. Precision engineered for performance and energy
savings, these products dramatically reduce energy consumption by up to 80% and virtually eliminate ongoing maintenance expenses for a variety of customers and applications.
Highlights:
• Engineered and manufactured in Wisconsin, USA from domestic and imported components
• ETL Certified: Conforms to UL STD 1598 & CSA STD C22.2 # 250.0 for wet locations
• L70 calculated LED life over 300,000+ hours
• Drivers are 0-10v dimming standard
• Six light engine options from 5,622 – 31,849 lumens for 75-1000w HID replacements
• Premium high-output Chip-On-Board (COB) LEDs in 5000K, 4000K and 3000K options, custom color temps available upon request
• Minimum CRI of 70, custom CRI available
• DLC qualified models available. Please refer to www.designlights.org for the most current information.
Common Applications:
• Parking lots, ramps, walkways and roadways
• General area and site lighting
• Car dealerships, schools, hospitals, hotels and gas stations
• Retail stores and commercial buildings
• Sports lighting and ball fields
Light Engine Warranty:
• 5-year standard limited warranty on all light engine components
• Accessories and adders covered by separate OEM supplier warranties
Search www.designlights.orgfor qualifying models.
12” & 16” LED Shoebox Area & Flood Lights, Heritage Series
206 W. McWilliams St.Suite 101Fond du Lac, WI 54935
888-791-1463quotes@lightpolesplus.comLightPolesPlus.com
This specification brochure is intended to serve as a general guide. Our products are continually being engineered and improved, and specifications are subject to change without notice.
Product Specifications
Rev. V09142017
Engineered&Manufactured
In TheUSAENERGYSAVINGS
50-80%
LED LIFE
300,000+HOURS
IntertekLED ENGINE
#SunnySide
U
p
TECHNOL O GYHousing Construction, Finish & Mounting:
• Rugged, die-cast, soft square aluminum housing
• Impact-resistant, tempered glass lens and durable silicone gasket
• Durable, multi-layer, polyester powder coat or industrial grade liquid paint
• Available in a variety of colors such as dark bronze, black, white, light gray, dark green and natural aluminum (custom colors available upon request)
• 6” pole mount, 10” pole mount, adjustable slipfitter and trunnion yolk brackets available as standard mounting accessories
Optics & Lighting Distribution:
• Innovative silicone optics assembly with precision light control and cutoff
• Standard photometric distributions include V-WIDE, 3/4-FWD, 30° NARROW SPOT and 70° MEDIUM SPOT
• No secondary optics used for base model
• IES files, photometric reports and simulations available upon request
Automotive Dealership Optics:
• Left and right optical rotation available for applications like car dealership front lines (optics are not field-rotatable, must be done at factory)
• Delivers enhanced lighting and proper photometric control of auto dealership merchandise
• Allows for simple 2@180 pole mount while rotating forward throw light patterns toward dealership merchandise
Electrical:
• Operating temp: -40 ℃ to +50 ℃
• Standard AC input of 120-277v VAC, up to 480v available
• EMI filter: 47CFR, part 2, part 15
• Power factor: >0.9
• Total harmonic distortion: <20%
• Surge protection: IEC/EN 61000-4-5 EMC test standard
• Licensed electrician required for installation
Energy Control Options:
• Daylight harvesting and photo controls
• Motion control and dimming
• Surge protection
• CA Title 24 compliance options available upon request
Effective Projected Area (EPA) & Weight:
12” Housing (15 LBS)
• 0.75 EPA at 0°
• 1.3 EPA at 45°
16” Housing (25 LBS)
• 1.2 EPA at 0°
• 2.0 EPA at 45°
Created & Simulated per IESNA LM-63-1995
160w Shoebox, Type V, 20’ Height 160w Shoebox, Type V Square, 20’ Height 160w Shoebox, Type III/IV, 20’ Height 160w Shoebox, Type IV, 20’ Height
0.1 fc 0.5 fc 2.0 fc 5.0 fc
LEGEND
Search www.designlights.orgfor qualifying models.
206 W. McWilliams St.Suite 101Fond du Lac, WI 54935
888-791-1463quotes@lightpolesplus.comLightPolesPlus.com
This specification brochure is intended to serve as a general guide. Our products are continually being engineered and improved, and specifications are subject to change without notice.
1. Considered to be a typical HID equivalent. Specific HID wattage equivalents will depend on things like environmental and application characteristics, distribution type and design criteria.
2. Considered initial nominal value of the LED light engine as specified by the LED chip manufacturer. Fixture efficacy and lumen output will depend on things like color temperature, distribution type and environmental characteristics.
3. Considered the typical initial delivered lumens of the LED light engine. Specific lumens for an application will depend on things like color temperature, distribution type and environmental characteristics.
4. Lumen maintenance values at 25 ℃ are calculated per TM-21 based on LM-80 data and in-house luminaire testing.
5. In accordance with IESNA TM-21-11, Projected Values represent interpolated value based on time durations that are within six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing (DUT) i.e. the packaged LED chip.
6. In accordance with IESNA TM-21-11, Calculated Values represent time durations that exceed six times (6X) the IESNA LM-80-08 total test duration (in hours) for the device under testing (DUT) i.e. the packaged LED chip.
Note: Additional wattages and configurations available upon request. Specifications are subject to change without notice.
Recommended Lumen Maintenance Factor (LMF)⁴
Type Ambient Initial LMF 25K Hour Projected LMF⁵50K Hour Projected LMF⁵75K Hour Projected LMF⁶100K Hour Projected LMF⁶
COB 25 ℃ (77 ℉)100%96%94%92%90%
Rev. V09142017
Engineered&Manufactured
In TheUSAENERGYSAVINGS
50-80%
LED LIFE
300,000+HOURS
IntertekLED ENGINE
#SunnySide
U
p
TECHNOL O GYLight Engine Specifications (Values Listed for Type V, 5000K)
16”12”
Search www.designlights.orgfor qualifying models.
BaseModel System Watts LEDWatts HIDReplacement¹Number of COBs Drive Current Nominal Lumens²Delivered Lumens³L70 EnergySTARLED Life⁴
12-SBHC-40-50-MV-5 40w 36w 75-175w 1 1,050 mA 5,622 4,854 300,000+ Hrs
12-SBHC-80-50-MV-5 79w 71w 125-300w 2 1,050 mA 11,119 10,007 300,000+ Hrs
12-SBHC-120-50-MV-5*118w 106w 200-400w 3 1,050 mA 16,490 14,841 300,000+ Hrs
16-SBHC-160-50-MV-5*157w 142w 300-525w 4 1,050 mA 21,735 19,562 300,000+ Hrs
16-SBHC-200-50-MV-5 196w 177w 400-650w 5 1,050 mA 26,855 24,169 300,000+ Hrs
16-SBHC-240-50-MV-5*235w 211w 750-1000w 6 1,050 mA 31,849 28,664 300,000+ Hrs
* 120w: DLC qualified model in 3000K, 4000K and 5000K. - 160w: DLC qualified model in MV and HV voltage. - 240w: DLC qualified model.
206 W. McWilliams St.Suite 101Fond du Lac, WI 54935
888-791-1463quotes@lightpolesplus.comLightPolesPlus.com
This specification brochure is intended to serve as a general guide. Our products are continually being engineered and improved, and specifications are subject to change without notice.
* Many lens options available, contact us for more options
Ordering Information
Rev. V09142017
Engineered&Manufactured
In TheUSAENERGYSAVINGS
50-80%
LED LIFE
300,000+HOURS
IntertekLED ENGINE
#SunnySide
U
p
TECHNOL O GYMounting Accessories
Ex. 12-SBHC-120-50-MV-5-DB-6S-BPC1
Arm Mount Trunnion Mount Slipfitter Mount
Tennis Court Davit
Arm Adapter
Search www.designlights.orgfor qualifying models.
Accessories
Mounting
6S =6” Arm (Square Pole)
6R =6” Arm (Round Pole)
10S =10” Arm (Square Pole), For @90° Shoebox Configurations
10R =10” Arm (Round Pole), For @90° Shoebox Configurations
SF =2.38” OD Slipfitter
TR =Trunnion Yoke
TCAA =Tennis Court Davit Arm Adapter For Slipfitter Mount
Housing
WG12 =12” Wire Guard
WG16 =16” Wire Guard
HSV12 =12” House Side Visor
HSV16 =16” House Side Visor
Controls
BPC1 =Button Photocontrol, 120 VAC
BPC2 =Button Photocontrol, 208 to 277 VAC
BPC3 =Button Photocontrol, 347 VAC
BPC4 =Button Photocontrol, 480 VAC
SPC1 =Swivel Photocontrol, 120 VAC
SPC2 =Swivel Photocontrol, 208 to 277 VAC
SPC3 =Swivel Photocontrol, 480 VAC
FSP221BDL2 =Motion/Photo Sensor, 0-8’ mounting heights, 48’ diameter @ 8’, 100-347VAC (single phase) or 208/230/480VAC (phase-to-phase) (Installed In Fixture)
FSP221BDL7 =Motion/Photo Sensor, 8-40’ mounting heights, 100’ diameter @ 40’, 100-347VAC (single phase) or 208/230/480VAC (phase-to-phase) (Installed In Fixture)
FSIR100 =Optional Remote For Motion/Photo Sensor, One Remote Controls Multiple Units
SRG1 =Surge Protector, 120v - 277v
SRG4 =Surge Protector, 347v - 480v
F10 =10 Amp Fuse Kit, 120-480 VAC
Other
WHP10NP =10’ Cord w/o Plug, Stripped Pigtail Both Ends (Not Installed)
WHP6NP =6’ Cord w/o Plug, Stripped Pigtail Both Ends (Not Installed)
WHP10120P =10’ Cord w/ NEMA 5-15P, Stripped Pigtail One End (Not Installed)
WHP6120P =6’ Cord w/ NEMA 5-15P, Stripped Pigtail One End (Not Installed)
WHP3NP =3’ Cord w/o Plug, Stripped Pigtail Both Ends (Not Installed)
WHP3120P =3’ Cord w/ NEMA 5-15P, Stripped Pigtail One End (Not Installed)
CG1 =1/2” NPT Cord Grip, 0.180-0.400” Cord OD Range (Not Installed)
Color Temp.
50 =5000K
40 =4000K
30 =3000K
CT =Custom
Color
DB =Dark Bronze
BK =Black
WH =White
SG =Slate Gray
LG =Light Gray
DG =Dark Green
NA =Nat. Alum. Paint
CC =Custom Color
Distribution Type
5 =Type V Round
5W =Type V Square
4 =Type IV FWD
34 =Type III/IV FWD
3 =Type III Wide
70 =70° Medium Spot
30 =30° Narrow Spot
CD =Custom
Designation
12-SBHC =12” Shoebox COB
16-SBHC =16” Shoebox COB
Wattage
40 =40 Watt
80 =80 Watt
120 =120 Watt
160 =160 Watt
200 =200 Watt
240 =240 Watt
Input Voltage
MV =100-277v
HV =347-480v
CV =Custom
206 W. McWilliams St.Suite 101Fond du Lac, WI 54935
888-791-1463quotes@lightpolesplus.comLightPolesPlus.com
This specification brochure is intended to serve as a general guide. Our products are continually being engineered and improved, and specifications are subject to change without notice.
Rev. V09142017
Engineered&Manufactured
In TheUSAENERGYSAVINGS
50-80%
LED LIFE
300,000+HOURS
IntertekLED ENGINE
#SunnySide
U
p
TECHNOL O GY6” & 10” Arm Drill Pattern for 12” & 16” Shoebox Fixtures
!IMPORTANT: DIMENSIONS ARE NOT TO SCALE!
3” Recommended
1”
1”
3/8” Diameter
TOP OF POLE
3/8” Diameter
3/4” Diameter (Wire Entry)
206 W. McWilliams St.Suite 101Fond du Lac, WI 54935
888-791-1463quotes@lightpolesplus.comLightPolesPlus.com
This specification brochure is intended to serve as a general guide. Our products are continually being engineered and improved, and specifications are subject to change without notice.
Rev. V09142017
Engineered&Manufactured
In TheUSAENERGYSAVINGS
50-80%
LED LIFE
300,000+HOURS
IntertekLED ENGINE
#SunnySide
U
p
TECHNOL O GYTennis Court Davit Arm Adapter For Slipfitter Mount
!IMPORTANT: DIMENSIONS ARE NOT TO SCALE!
206 W. McWilliams St.Suite 101Fond du Lac, WI 54935
888-791-1463quotes@lightpolesplus.comLightPolesPlus.com